16. Hook Libraries
16.1. Introduction
Kea is both flexible and customizable, via the use of "hooks." This feature lets Kea load one or more dynamically linked libraries (known as "hook libraries") and call functions in them at various points in its processing ("hook points"). Those functions perform whatever custom processing is required.
The hooks concept allows the core Kea code to remain reasonably small by moving features that only some, but not all, users find useful to external libraries. Those with no need for certain functions can simply choose not to load those libraries.
Hook libraries are loaded by individual Kea processes, not by Kea as a whole. This means, among other things, that it is possible to associate one set of libraries with the DHCPv4 server and a different set with the DHCPv6 server.
It is also possible for a process to load multiple libraries. When processing reaches a hook point, Kea calls the hook library functions attached to it. If multiple libraries have attached a function to a given hook point, Kea calls all of them, in the order in which the libraries are specified in the configuration file. The order may be important; consult the documentation of the libraries for specifics.
When a Kea process unloads a library, it expects the dlclose
function
to remove all library symbols, as well as the library code, from address space.
Although most OSes implement the dlclose
function, this behavior is not
required by the POSIX standard and not all systems support it; for example, the musl
library, used by default by Alpine Linux, implements the dlclose
function
as a no operation. On such systems a library actually remains loaded for the
lifetime of the process, which means that it must be restarted
to update libraries with newer versions; it is not sufficient to simply
reconfigure or reload the Kea process.
The next sections describe how to install and configure hook libraries. Users who are interested in writing their own hook library can find information in the Hooks Developer's Guide section of the Kea Developer's Guide.
Note that some libraries are available under different licenses.
Please also note that some libraries may require additional dependencies and/or compilation switches to be enabled.
16.2. Installing Hook Packages
Note
For more details about installing the Kea Premium Hooks package, please read this Knowledgebase article.
Some hook packages are included in the base Kea sources. There is no need to do anything special to compile or install them, as they are covered by the usual building and installation procedures. Please refer to Installation for a general overview of the installation process.
ISC provides several additional premium hooks in the form of packages, which follow a similar installation procedure but with several additional steps. For our users' convenience, the premium hooks installation procedure is described in this section.
1. Download the package; detailed instructions are provided in the KB article
above. The package will be a file with a name similar to
kea-premium-|release|.tar.gz
. (The name may vary depending on the package
purchased.)
2. Administrators who have the sources for the corresponding version of the
open-source Kea package on their system from the initial Kea installation
should skip this step. Otherwise, extract the Kea source from the original
tarball that was downloaded. For example, with a download of Kea 2.7.5-git,
there should be a tarball called kea-|release|.tar.gz
on the system.
Unpack this tarball:
$ tar -zxvf kea-2.7.5-git.tar.gz
This will unpack the tarball into the kea-|release|
subdirectory of
the current working directory.
3. Unpack the Kea premium hooks tarball into the same directory where the
original Kea source is located. Once Kea 2.7.5-git has been unpacked into a kea-|release|
subdirectory and the Kea premium tarball is in the current directory, the following
steps will unpack the premium tarball into the correct location:
$ cd kea-2.7.5-git $ tar -xvf ../kea-premium-2.7.5-git.tar.gz
Note that unpacking the Kea premium package puts the files into a
directory named premium
. Regardless of the name of the package, the
directory is always called premium
, although its contents will vary
depending on the hooks package.
4. Run the autoreconf
tools. This step is necessary to update Kea's build
script to include the additional directory. If this tool is not already
available on the system, install the automake
and autoconf
tools. To generate the configure script, please use:
$ autoreconf -i
5. Rerun configure
, using the same configuration options that were used when
originally building Kea. It is possible to verify that configure
has detected the
premium package by inspecting the summary printed when it exits. The
first section of the output should look something like this:
Package: Name: kea Version: 2.7.5-git Extended version: 2.7.5-git (tarball) OS Family: Linux Using GNU sed: yes Premium package: yes Included Hooks: forensic_log flex_id host_cmds
The last line indicates which specific hooks were detected. Note that some hooks may require their own dedicated switches. Please consult later sections of this chapter for details.
Rebuild Kea.
$ make
If the machine has multiple CPU cores, an interesting option to consider
here is using the argument -j X
, where X
is the number of available cores.
Install Kea sources along with the hooks:
$ sudo make install
Note that as part of the installation procedure, the install script
places additional hook libraries and associated files into the premium/
directory.
The installation location of the hook libraries depends on whether the
--prefix
parameter was specified in the configure
script. If not,
the default location is /usr/local/lib/kea/hooks
. The proper installation
of the libraries can be verified with this command:
$ ls -l /usr/local/lib/kea/hooks/*.so
/usr/local/lib/kea/hooks/libdhcp_class_cmds.so
/usr/local/lib/kea/hooks/libdhcp_flex_id.so
/usr/local/lib/kea/hooks/libdhcp_flex_option.so
/usr/local/lib/kea/hooks/libdhcp_host_cmds.so
/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so
/usr/local/lib/kea/hooks/libdhcp_legal_log.so
/usr/local/lib/kea/hooks/libdhcp_subnet_cmds.so
The exact list returned depends on the packages installed. If the
directory was specified via --prefix
, the hook libraries will be located in
{prefix directory}/lib/kea/hooks
.
16.3. Configuring Hook Libraries
The hook libraries for a given process are configured using the
hooks-libraries
keyword in the configuration for that process. (Note
that the word "hooks" is plural.) The value of the keyword is an array
of map structures, with each structure corresponding to a hook library. For
example, to set up two hook libraries for the DHCPv4 server, the
configuration would be:
"Dhcp4": {
:
"hooks-libraries": [
{
"library": "/opt/first_custom_hooks_example.so"
},
{
"library": "/opt/local/second_custom_hooks_example.so",
"parameters": {
"mail": "spam@example.com",
"floor": 13,
"debug": false,
"users": [ "alice", "bob", "charlie" ],
"languages": {
"french": "bonjour",
"klingon": "yl'el"
}
}
}
]
:
}
Note
Libraries are reloaded even if their lists have not changed, because the parameters specified for the library (or the files those parameters point to) may have changed.
Libraries may have additional parameters that are not mandatory, in the
sense that there may be libraries that do not require them. However, for any
given library there is often a requirement to specify a certain
set of parameters. Please consult the documentation for each individual library for
details. In the example above, the first library (/opt/first_custom_hooks_example.so
)
has no parameters. The second library (/opt/local/second_custom_hooks_example.so
)
has five parameters: specifying mail (string parameter), floor (integer parameter),
debug (boolean parameter), lists (list of strings), and maps (containing strings).
Nested parameters can be used if the library supports it. This topic is explained in detail
in the Hooks Developer's Guide section of the Kea Developer's Guide.
Some hooks use user context to set the parameters. See User Contexts in Hooks.
Notes:
The full path to each library should be given.
As noted above, the order in which the hooks are called may be important; consult the documentation for each library for specifics.
An empty list has the same effect as omitting the
hooks-libraries
configuration element altogether.Note
There is one case where this is not true: if Kea is running with a configuration that contains a
hooks-libraries
item, and that item is removed and the configuration reloaded, the removal is ignored and the libraries remain loaded. As a workaround, instead of removing thehooks-libraries
item, change it to an empty list.
At the moment, only the kea-dhcp4
and kea-dhcp6
processes support
hook libraries.
16.3.1. Order of Configuration:
It is important to recognize that the order in which hook libraries are
configured determines the order in which their callouts will be executed,
in cases where more than one hook library implements the same callout. For
example, to use the Flexible Identifier (also called Flex ID) hook library to formulate the client
IDs in conjunction with the High Availability (HA) hook library for load-balanced HA, it is essential
that the Flex ID library be specified first in the server's hooks-libraries
section. This ensures that the client ID is formulated by the Flex ID library
before the HA library uses it for load-balancing. Similarly, it is best to
specify the Forensic Logging library last, to ensure that any other installed hooks have already made
their contributions to the packet processing before that one is loaded.
16.3.2. User Contexts in Hooks
Hook libraries can have their own configuration parameters, which is convenient if the parameter applies to the whole library. However, sometimes it is useful to extend certain configuration entities with additional configuration data. This is where the concept of user contexts comes in. A system administrator can define an arbitrary set of data and attach it to Kea structures, as long as the data is specified as a JSON map. In particular, it is possible to define fields that are integers, strings, boolean, lists, or maps. It is possible to define nested structures of arbitrary complexity. Kea does not use that data on its own; it simply stores it and makes it available for the hook libraries.
Another use case for user contexts may be storing comments and other
information that will be retained by Kea. Regular comments are discarded
when the configuration is loaded, but user contexts are retained. This is
useful if administrators want their comments to survive config-set
or config-get
operations, for example.
If user context is supported in a given context, the parser translates "comment" entries into user context with a "comment" entry.
User context can store configuration for multiple hooks and comments at once.
Some hooks use user context for a configuration that can be easily edited without the need to restart the server.
The DDNS Tuning Hook uses user context to configure per-subnet behavior. Here's an example:
"subnet4": [{
"id": 1,
"subnet": "192.0.2.0/24",
"pools": [{
"pool": "192.0.2.10 - 192.0.2.20"
} ],
"user-context": {
"ddns-tuning": {
"hostname-expr": "'guest-'+int8totext(substring(pkt4.yiaddr, 0,1))+'-' \
+int8totext(substring(pkt4.yiaddr, 1,2))+'-' \
+int8totext(substring(pkt4.yiaddr, 2,3))+'-' \
+int8totext(substring(pkt4.yiaddr, 3,4))"
},
"last-modified": "2017-09-04 13:32",
"phones": [ "x1234", "x2345" ],
"devices-registered": 42,
"billing": false
}
}]
The Limits hook uses user-context in classes and subnets to set parameters. For example:
{
"Dhcp6": {
"client-classes": [
{
"name": "gold",
"user-context": {
"limits": {
"address-limit": 2,
"prefix-limit": 1,
"rate-limit": "1000 packets per second"
}
}
}
],
"hooks-libraries": [
{
"library": "/usr/local/lib/libdhcp_limits.so"
}
],
"subnet6": [
{
"id": 1,
"pools": [
{
"pool": "2001:db8::/64"
}
],
"subnet": "2001:db8::/64",
"user-context": {
"limits": {
"address-limit": 4,
"prefix-limit": 2,
"rate-limit": "10 packets per minute"
}
}
}
]
}
}
16.3.3. Parked-Packet Limit
Kea servers contain a mechanism by which the response to a client packet may be held, pending completion of hook library work. We refer to this as "parking the packet." When work is ready to continue, the server unparks the response and continues processing.
There is a global parameter, parked-packet-limit
, that may be used to limit
the number of responses that may be parked at any given time. This acts as a
form of congestion handling and protects the server from being swamped when the
volume of client queries is outpacing the server's ability to respond. Once the
limit is reached, the server emits a log and drops any new responses until
parking spaces are available.
In general, smaller values for the parking lot limit are likely to cause more
drops but with shorter response times; larger values are likely to result in
fewer drops but with longer response times. Currently, the default value for
parked-packet-limit
is 256.
Warning
Using too small a value may result in an unnecessarily high drop rate, while using too large a value may lead to response times that are simply too long to be useful. A value of 0, while allowed, disables the limit altogether, but this is highly discouraged as it may lead to Kea servers becoming unresponsive to clients. Choosing the best value is very site-specific; we recommend users initially leave it at the default value of 256 and observe how the system behaves over time with varying load conditions.
Here is an example of the global parameter used with libdhcp_ha.so
.
It lowers the number of concurrently parked packets to 128.
{
"Dhcp6": {
"parked-packet-limit": 128
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so"
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [
{
"mode": "hot-standby",
"peers": [
{
"name": "server1",
"role": "primary",
"url": "http://127.0.0.1:8080/"
},
{
"name": "server2",
"role": "standby",
"url": "http://127.0.0.1:8088/"
}
],
"this-server-name": "server1"
}
]
}
}
]
}
}
16.4. Available Hook Libraries
As described above, the hook functionality provides a way to customize a Kea server without modifying the core code. ISC has chosen to take advantage of this feature to provide functions that may only be useful to a subset of Kea users. To this end, ISC has created some hook libraries, discussed in the following sections.
Note
Some of these libraries are available at no cost with the open source base code; others are premium libraries available for standalone purchase, while some are only available to organizations that contribute to Kea's development through paid ISC support contracts. Paid support includes professional engineering assistance, advance security notifications, input into ISC's roadmap planning, and many other benefits, while helping keep Kea sustainable in the long term. ISC encourages companies and organizations to consider purchasing a paid support contract; further information can be obtained by completing the form at https://www.isc.org/contact.
The following table provides a list of hook libraries currently available
from ISC. It is important to pay attention to which libraries may be
loaded by which Kea processes. It is a common mistake to configure the
kea-ctrl-agent
process to load libraries that should, in fact, be
loaded by the kea-dhcp4
or kea-dhcp6
processes. If a library
from ISC does not work as expected, please make sure that it has been
loaded by the correct process per the table below.
Name |
Availability |
Description |
---|---|---|
Kea open source |
This hook library adds BOOTP support, as defined in RFC 1497. It recognizes received BOOTP requests: they are translated into DHCPREQUEST packets, put into the BOOTP client class, and receive infinite lifetime leases. |
|
ISC support customers |
This hook library allows configured DHCP client classes to be added, updated, deleted, and fetched without needing to restart the DHCP server. |
|
ISC support customers |
This hook library implements a collection of commands to manage Kea configuration information in a database. This library may only be used in conjunction with one of the supported Configuration Backend implementations. |
|
ISC premium library |
This hook library adds custom behaviors related to Dynamic DNS updates on a per-client basis. Its primary feature is to allow the host name used for DNS to be calculated using an expression. |
|
ISC premium library |
Kea software provides a way to handle host reservations that
include addresses, prefixes, options, client classes and
other features. The reservation can be based on hardware
address, DUID, circuit-id, or client-id in DHCPv4 and on
hardware address or DUID in DHCPv6. However, there are
sometimes scenarios where the reservation is more complex,
e.g. uses other options than mentioned above, uses parts of
specific options, or perhaps uses a combination of several
options and fields to uniquely identify a client. Those
scenarios are addressed by the Flexible Identifier hook
application. It allows defining an expression, similar to
the one used in client classification,
e.g. |
|
Kea open source |
This library provides hooks that compute option values instead of static configured values. An expression is evaluated on the query packet. Defined add, supersede, and remove actions are applied on the response packet before it is sent using the evaluation result. |
|
ISC premium library |
This library provides hooks that record a detailed log of lease assignments and renewals in a set of log files. In many legal jurisdictions, companies - especially ISPs - must record information about the addresses they have leased to DHCP clients. This library is designed to help with that requirement. If the information that it records is sufficient, it may be used directly. If a jurisdiction requires a different set of information to be saved, it can be used as a template or example to create custom logging hooks. In Kea 1.9.8, additional parameters were added to give users more flexibility regarding what information should be logged. |
|
ISC support customers |
This hook library adds support to the Kea D2 server (kea-dhcp-ddns) for using GSS-TSIG to sign DNS updates. |
|
Kea open source |
The risk of DHCP service unavailability can be minimized by setting up a pair of DHCP servers in a network. Two modes of operation are supported. The first one is called load-balancing, and is sometimes referred to as "active-active." Each server can handle selected groups of clients in this network, or all clients if it detects that its partner has become unavailable. It is also possible to designate one server to serve all DHCP clients, and leave another server as standby. This mode is called "hot standby" and is sometimes referred to as "active-passive." This server activates its DHCP function only when it detects that its partner is not available. Such cooperation between the DHCP servers requires that these servers constantly communicate with each other to send updates about allocated leases, and to periodically test whether their partners are still operational. The hook library also provides an ability to send lease updates to external backup servers, making it much easier to have a replacement that is up to date. |
|
ISC support customers |
Some database backends, such as RADIUS, may take a long time to respond. Since Kea in general is synchronous, backend performance directly affects DHCP performance. To minimize performance impact, this library provides a way to cache responses from other hosts. This includes negative caching, i.e. the ability to remember that there is no client information in the database. |
|
ISC premium library |
Kea provides a way to store host reservations in a database. In many larger deployments it is useful to be able to manage that information while the server is running. This library provides management commands for adding, querying, and deleting host reservations in a safe way without restarting the server. In particular, it validates the parameters, so an attempt to insert incorrect data, e.g. add a host with conflicting identifier in the same subnet, is rejected. Those commands are exposed via the command channel (JSON over UNIX sockets) and the Control Agent (JSON over RESTful interface). |
|
Kea open source |
This hook library offers a number of commands used to manage leases. Kea can store lease information in various backends: memfile, MySQL, PostgreSQL. This library provides a unified interface to manipulate leases in an unified, safe way. In particular, it allows manipulation of memfile leases while Kea is running, sanity check changes, lease existence checks, and removal of all leases belonging to a specific subnet. It can also catch obscure errors, like the addition of a lease with subnet-id that does not exist in the configuration, or configuration of a lease to use an address that is outside of the subnet to which it is supposed to belong. This library allows easy management of user contexts associated with leases. |
|
ISC support customers |
This library adds support for DHCPv4 Leasequery (RFC 4388), DHCPv4 Bulk Leasequery (RFC6926); DHCPv6 Leasequery (RFC 5007), and DHCPv6 Bulk Leasequery (RFC5460). |
|
ISC support customers |
With this hook library, |
|
Kea open source |
This hook library is an implementation of the Kea Lease, Host and Configuration Backend for MySQL. It uses a MySQL database as a repository for the Kea leases, host reservations and configuration information. Kea servers use this library to fetch their configurations if Configuration Backend is used. |
|
PerfMon CURRENTLY EXPERIMENTAL |
Kea open source |
With this hook library, |
ISC support source customers |
With this hook library, the |
|
Kea open source |
This hook library is an implementation of the Kea Lease, Host and Configuration Backend for PostgreSQL. It uses a PostgreSQL database as a repository for the Kea leases, host reservations and configuration information. Kea servers use this library to fetch their configurations if Configuration Backend is used. |
|
ISC support customers |
The RADIUS hook library allows Kea to interact with RADIUS servers using access and accounting mechanisms. The access mechanism may be used for access control, assigning specific IPv4 or IPv6 addresses reserved by RADIUS, dynamically assigning addresses from designated pools chosen by RADIUS, or rejecting the client's messages altogether. The accounting mechanism allows a RADIUS server to keep track of device activity over time. |
|
ISC support customers |
This hook library adds support to the Kea Control Agent (kea-ctrl-agent) for Role-Based Access Control filtering of commands. |
|
Kea open source |
This hook library adds support to run external scripts for specific packet-processing hook points. There are several exported environment variables available for the script. |
|
Kea open source |
This library provides additional commands for retrieving accurate DHCP lease statistics, for Kea DHCP servers that share the same lease database. This setup is common in deployments where DHCP service redundancy is required and a shared lease database is used to avoid lease-data replication between the DHCP servers. This hook library returns lease statistics for each subnet. |
|
ISC support customers |
In deployments in which subnet configuration needs to be frequently updated, it is a hard requirement that such updates be performed without the need for a full DHCP server reconfiguration or restart. This hook library allows for incremental changes to the subnet configuration such as adding or removing a subnet. It also allows for listing all available subnets and fetching detailed information about a selected subnet. The commands exposed by this library do not affect other subnets or configuration parameters currently used by the server. |
|
Kea open source |
Reads known users list from a file. Unknown users will be
assigned a lease from the last subnet defined in the
configuration file, e.g. to redirect them to a captive
portal. This demonstrates how an external source of
information can be used to influence the Kea allocation
engine. This hook is part of the Kea source code and is
available in the |
ISC hopes to see more hook libraries become available as time progresses, developed both internally and externally. Since this list may evolve dynamically, it is maintained on a wiki page, available at https://gitlab.isc.org/isc-projects/kea/wikis/Hooks-available. Developers or others who are aware of any hook libraries not listed there are asked to please send a note to the kea-users or kea-dev mailing lists for updating. (Information on all of ISC's public mailing lists can be found at https://www.isc.org/mailinglists/.)
The libraries developed by ISC are described in detail in the following sections.
16.5. libdhcp_bootp.so
: Support for BOOTP Clients
This hook library adds support for BOOTP with vendor-information extensions
(RFC 1497). Received BOOTP
requests are recognized, translated into DHCPREQUEST packets by adding
a dhcp-message-type
option, and put into the "BOOTP" client class.
Members of this class get infinite lifetime leases but the class can
also be used to guard a pool of addresses.
The DHCP-specific options, such as dhcp-message-type
, are removed from
the server's responses; responses shorter than the BOOTP minimum
size of 300 octets are padded to this size.
Note
libdhcp_bootp.so
is part of the open source code and is
available to every Kea user.
Note
This library can only be loaded by the kea-dhcp4
process,
as there is no BOOTP protocol for IPv6.
This library is loaded similarly to other hook libraries, and it takes no parameters.
"Dhcp4": {
"hooks-libraries": [
{ "library": "/usr/local/lib/libdhcp_bootp.so" },
...
]
}
Note
A host reservation for a BOOTP client should use the hardware address
as the identifier (the client-id
option is a DHCP-specific option).
Incoming BOOTP packets are added to the BOOTP class, allowing administrators to segregate BOOTP clients into separate pools. For example:
"Dhcp4": {
"client-classes": [
{
// The DHCP class is the complement of the BOOTP class
"name": "DHCP",
"test": "not member('BOOTP')"
}
],
"subnet4": [
{
"subnet": "192.0.2.0/24",
"pools": [
{
// BOOTP clients will be handled here
"pool": "192.0.2.200 - 192.0.2.254",
"client-class": "BOOTP"
},
{
// Regular DHCP clients will be handled here
"pool": "192.0.2.1 - 192.0.2.199",
"client-class": "DHCP"
}],
...
},
...
],
...
}
16.5.1. BOOTP Hooks Limitations
Currently the BOOTP library has the following limitation:
Basic BOOTP, as defined in RFC 951, is not supported. Kea only supports BOOTP with vendor-information extensions.
16.6. libdhcp_cb_cmds.so
: Configuration Backend Commands
This hook library is used to manage Kea servers' configurations in a
configuration backend database. This library must be used in conjunction with
the available CB hook libraries implementing the common APIs to create, read,
update, and delete (CRUD) the configuration information in the respective
databases. For example: libdhcp_mysql.so
implements this API for
MySQL while libdhcp_pgsql.so
implements this API for PostgreSQL.
To manage the configuration information in a MySQL database, both
libdhcp_mysql.so
and libdhcp_cb_cmds.so
must be
loaded by the server used for configuration management.
To manage the configuration information in a PostgreSQL database, both
libdhcp_pgsql.so
and libdhcp_cb_cmds.so
must be
loaded by the server used for configuration management.
More information on how to configure the Configuration Backend hook library for use with a MySQL or PostgreSQL database can be found in the Configuration Backend in DHCPv4 and Configuration Backend in DHCPv6 sections.
Note
libdhcp_cb_cmds.so
is available only to ISC customers with
a paid support contract. For more information on subscription options,
please complete the form at https://www.isc.org/contact.
Note
Please read about CB Capabilities and Limitations before using the commands described in this section.
16.6.1. Command Structure
There are 5 types of commands supported by this library:
del
- delete the selected object from the database, e.g.remote-global-parameter4-del
.get
- fetch the selected object from the database, e.g.remote-subnet4-get-by-id
.get-all
- fetch all objects of the particular type from the database, e.g.remote-option-def4-get-all
.list
- list all objects of the particular type in the database, e.g.remote-network4-list
; this class of commands returns brief information about each object compared to the output ofget-all
.set
- creates or replaces an object of the given type in the database, e.g.remote-option4-global-set
.
All types of commands accept an optional remote
map which selects the
database instance to which the command refers. For example:
{
"command": "remote-subnet4-list",
"arguments": {
"remote": {
"type": "mysql",
"host": "192.0.2.33",
"port": 3302
}
}
}
selects the MySQL database, running on host 192.0.2.33 and port 3302, to
fetch the list of subnets from. All parameters in the remote
argument are
optional. The port
parameter can be only specified in conjunction
with the host
. If no options in the remote
parameter are to
be specified, the parameter should be omitted. In this case, the server
will use the first backend listed in the config-control
map within
the configuration of the server receiving the command.
Note
In the current Kea release, it is only possible to configure the Kea server
to use a single configuration backend. Strictly speaking, it is
possible to point the Kea server to at most one database (either MySQL or
PostgreSQL) using the config-control
parameter. Therefore, the remote
parameter may be omitted in the commands and libdhcp_cb_cmds.so
uses the sole backend by default. The example commands below most often show a
value of "mysql" for the type
parameter; it should be assumed that the
value is "postgresql" for installations using a PostgreSQL database.
16.6.2. Control Commands for DHCP Servers
This section describes and gives some examples of the control commands
implemented by libdhcp_cb_cmds.so
, to manage the
configuration information of the DHCPv4 and DHCPv6 servers. Many of the
commands are almost identical between DHCPv4 and DHCPv6; they only
differ by the command name. Other commands differ slightly by the
structure of the inserted data; for example, the structure of the IPv4 subnet
information is different than that of the IPv6 subnet.
Nevertheless, they still share the structure of their command arguments
and thus it makes sense to describe them together.
In addition, whenever the text in the subsequent sections refers to a DHCP command or DHCP parameter, it refers to both DHCPv4 and DHCPv6 variants. The text specific to the particular server type refers to them as: DHCPv4 command, DHCPv4 parameter, DHCPv6 command, DHCPv6 parameter, etc.
16.6.3. Metadata
The typical response to the get
or list
command includes a list
of returned objects (e.g. subnets), and each such object contains the
metadata
map with some database-specific information describing this
object. In other words, the metadata contains any information about the
fetched object which may be useful for an administrator but which is not
part of the object specification from the DHCP server standpoint. In the
present Kea release, the metadata is limited to the server-tag
. It
describes the association of the object with a particular server or
all servers.
The following is the example response to the remote-network4-list
command, which includes the metadata:
{
"result": 0,
"text": "1 IPv4 shared network(s) found.",
"arguments": {
"shared-networks": [
{
"name": "level3",
"metadata": {
"server-tags": [ "all" ]
}
}
],
"count": 1
}
}
Client implementations must not assume that the metadata contains only
the server-tags
parameter. In future releases, it is expected that this
map will be extended with additional information, e.g. object modification
time, log message created during the last modification, etc.
16.6.4. The remote-server4-del
, remote-server6-del
Commands
This command is used to delete the information about a selected DHCP server from the configuration database. The server is identified by a unique case insensitive server tag. For example:
{
"command": "remote-server4-del",
"arguments": {
"servers": [
{
"server-tag": "server1"
}
],
"remote": {
"type": "postgresql"
}
}
}
As a result of this command, all associations of the configuration for the
user-defined server called "server1" are removed from the database, including
non-shareable configuration information, such as global parameters, option
definitions, and global options. Any shareable configuration information,
i.e. the configuration elements which may
be associated with more than one server, is preserved. In particular, the
subnets and shared networks associated with the deleted servers are
preserved. If any of the shareable configuration elements was associated only
with the deleted server, this object becomes unassigned (orphaned). For
example: if a subnet has been created and associated with "server1" using
the remote-subnet4-set
command and "server1" is subsequently deleted, the
subnet remains in the database but no servers can use this subnet. The
subnet can be updated using the remote-subnet4-set
command, and can be
associated with either another server or with all servers, using the special
server tag "all". Such a subnet can be also deleted from the database
using the remote-subnet4-del-by-id
or
remote-subnet4-del-by-prefix
command, if it is no longer needed.
The following is the successful response to the remote-server4-del
command:
{
"result": 0,
"text": "1 DHCPv4 server(s) deleted.",
"arguments": {
"count": 1
}
}
Warning
The remote-server4-del
and
remote-server6-del
commands must be used with
care, because an accidental deletion of the server can cause some parts of the
existing configurations to be lost permanently from the database. This
operation is not reversible. Re-creation of the accidentally deleted server
does not revert the lost configuration for that server and such configuration
must be re-created manually by the user.
16.6.5. The remote-server4-get
, remote-server6-get
Commands
This command is used to fetch the information about the selected DHCP server from the configuration database. For example:
{
"command": "remote-server6-get",
"arguments": {
"servers": [
{
"server-tag": "server1"
}
],
"remote": {
"type": "mysql"
}
}
}
This command fetches the information about the DHCPv6 server identified by the server tag "server1". The server tag is case-insensitive. A successful response returns basic information about the server, such as the server tag and the user's description of the server:
{
"result": 0,
"text": "DHCP server server1 found.",
"arguments": {
"servers": [
{
"server-tag": "server1",
"description": "A DHCPv6 server located on the first floor."
}
],
"count": 1
}
}
16.6.6. The remote-server4-get-all
, remote-server6-get-all
Commands
This command is used to fetch all user-defined DHCPv4 or DHCPv6 servers from the database. The command structure is very simple:
{
"command": "remote-server4-get-all",
"arguments": {
"remote": {
"type": "mysql"
}
}
}
The response includes basic information about each server, such as its server tag and description:
{
"result": 0,
"text": "DHCPv4 servers found.",
"arguments": {
"servers": [
{
"server-tag": "server1",
"description": "A DHCP server located on the first floor."
},
{
"server-tag": "server2",
"description": "An old DHCP server to be soon replaced."
}
],
"count": 2
}
}
16.6.7. The remote-server4-set
, remote-server6-set
Commands
This command is used to create or replace an information about a DHCP server in
the database. The information about the server must be created when there is a
need to differentiate the configurations used by various Kea instances
connecting to the same database. Various configuration elements, e.g. global
parameters, subnets, etc. may be explicitly associated with the selected servers
(using server tags as identifiers), allowing only these servers to use the
respective configuration elements. Using the particular server tag to make such
associations is only possible when the server information has been stored in the
database via the remote-server4-set
or
remote-server6-set
commands. The
following command creates a new (or updates an existing) DHCPv6 server in the
database:
{
"command": "remote-server6-set",
"arguments": {
"servers": [
{
"server-tag": "server1",
"description": "A DHCP server on the ground floor."
}
],
"remote": {
"type": "mysql"
}
}
}
The server tag must be unique across all servers in the database. When the server information under the given server tag already exists, it is replaced with the new information. The specified server tag is case-insensitive, and the maximum length of the server tag is 256 characters. The following keywords are reserved and cannot be used as server tags: "all" and "any".
The following is the example response to the above command:
{
"result": 0,
"text": "DHCPv6 server successfully set.",
"arguments": {
"servers": [
{
"server-tag": "server1",
"description": "A DHCP server on the ground floor."
}
]
}
}
16.6.8. The remote-global-parameter4-del
, remote-global-parameter6-del
Commands
These commands are used to delete a global DHCP parameter from the configuration database. When the parameter is deleted from the database, the server uses the value specified in the configuration file for this parameter, or a default value if the parameter is not specified in the configuration file.
The following command attempts to delete the DHCPv4 renew-timer
parameter common for all servers from the database:
{
"command": "remote-global-parameter4-del",
"arguments": {
"parameters": [ "renew-timer" ],
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
If a server-specific parameter is to be deleted, the
server-tags
list must contain the tag of the appropriate
server. There must be exactly one server tag specified in this list.
16.6.9. The remote-global-parameter4-get
, remote-global-parameter6-get
Commands
These commands are used to fetch a scalar global DHCP parameter from the configuration database.
The following command attempts to fetch the boot-file-name
parameter for "server1":
{
"command": "remote-global-parameter4-get",
"arguments": {
"parameters": [ "boot-file-name" ],
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
The returned value has one of the four scalar types: string, integer, real, or boolean. Non-scalar global configuration parameters, such as map or list, are not returned by this command.
In the case of the example above, the string value is returned, e.g.:
{
"result": 0,
"text": "1 DHCPv4 global parameter found.",
"arguments": {
"parameters": {
"boot-file-name": "/dev/null",
"metadata": {
"server-tags": [ "all" ]
}
},
"count": 1
}
}
Note that the response above indicates that the returned parameter is associated with "all" servers rather than "server1", used in the command. This indicates that there is no "server1"-specific value in the database and therefore, the value shared by all servers is returned. If there were a "server1"-specific value in the database, that value would be returned instead.
The example response for the integer value is:
{
"result": 0,
"text": "1 DHCPv4 global parameter found.",
"arguments": {
"parameters": {
"renew-timer": 2000,
"metadata": {
"server-tags": [ "server1" ]
}
},
"count": 1
}
}
The real value:
{
"result": 0,
"text": "1 DHCPv4 global parameter found.",
"arguments": {
"parameters": {
"t1-percent": 0.85,
"metadata": {
"server-tags": [ "all" ]
}
},
"count": 1
}
}
Finally, the boolean value:
{
"result": 0,
"text": "1 DHCPv4 global parameter found.",
"arguments": {
"parameters": {
"match-client-id": true,
"metadata": {
"server-tags": [ "server2" ]
}
},
"count": 1
}
}
16.6.10. The remote-global-parameter4-get-all
, remote-global-parameter6-get-all
Commands
These commands are used to fetch all global DHCP parameters from the database for the specified server. The following example demonstrates how to fetch all global parameters to be used by the server "server1":
{
"command": "remote-global-parameter4-get-all",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
The example response may look as follows:
{
"result": 0,
"text": "DHCPv4 global parameters found.",
"arguments": {
"parameters": [
{
"boot-file-name": "/dev/null",
"metadata": {
"server-tags": [ "server1" ]
}
},
{
"match-client-id": true,
"metadata": {
"server-tags": [ "all" ]
}
}
],
"count": 2
}
}
The example response contains two parameters: one string parameter and one
boolean parameter. The metadata returned for each parameter indicates
whether this parameter is specific to "server1" or applies to all servers. Since the
match-client-id
value is associated with "all" servers,
it indicates that there is no "server1"-specific setting for this parameter.
Each parameter always has exactly one server tag associated with it, because
global parameters are non-shareable configuration elements.
Note
If the server tag is set to "all" in the command, the response will contain only the global parameters associated with the logical server "all". When the server tag points to the specific server (as in the example above), the returned list combines parameters associated with this server and all servers, but the former take precedence.
16.6.11. The remote-global-parameter4-set
, remote-global-parameter6-set
Commands
This command is used to create scalar global DHCP parameters in the database. If any of the parameters already exists, its value is replaced as a result of this command. It is possible to set multiple parameters within a single command, each having one of the four types: string, integer, real, or boolean. For example:
{
"command": "remote-global-parameter4-set",
"arguments": {
"parameters": {
"boot-file-name": "/dev/null",
"renew-timer": 2000,
"t1-percent": 0.85,
"match-client-id": true
},
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
An error is returned if any of the parameters is not supported by the DHCP
server or its type does not match. Care should be taken when multiple parameters
are specified in a single command, because it is possible that only some of the
parameters will be stored successfully and some will fail. If an error occurs when
processing this command, it is recommended to use
remote-global-parameter4-get-all
or
remote-global-parameter6-get-all
to check which of the parameters have
been stored/updated successfully and which have failed.
The server-tags
list is mandatory and must contain a single server tag or
the keyword "all". In the example above, all specified parameters are associated
with the "server1" server.
16.6.12. The remote-network4-del
, remote-network6-del
Commands
These commands are used to delete an IPv4 or IPv6 shared network from
the database. The optional parameter subnets-action
determines
whether the subnets belonging to the deleted shared network should also
be deleted or preserved. The subnets-action
parameter defaults to keep
,
which preserves the subnets. If it is set to delete
, the subnets are
deleted along with the shared network.
The following command:
{
"command": "remote-network6-del",
"arguments": {
"shared-networks": [
{
"name": "level3"
}
],
"subnets-action": "keep",
"remote": {
"type": "mysql"
}
}
}
deletes the "level3" IPv6 shared network. The subnets are preserved, but
they are disassociated from the deleted shared network and become
global. This behavior corresponds to the behavior of the
network4-del
, network6-del
commands with respect to the
subnets-action
parameter.
Note that the server-tags
parameter cannot be used for this command.
16.6.13. The remote-network4-get
, remote-network6-get
Commands
These commands are used to retrieve information about an IPv4 or
IPv6 shared network. The optional parameter subnets-include
denotes
whether the subnets belonging to the shared network should also be
returned. This parameter defaults to no
, in which case the subnets
are not returned. If this parameter is set to full
, the subnets are
returned together with the shared network.
The following command fetches the "level3" IPv6 shared network along with the full information about the subnets belonging to it:
{
"command": "remote-network6-get",
"arguments": {
"shared-networks": [
{
"name": "level3"
}
],
"subnets-include": "full",
"remote": {
"type": "mysql"
}
}
}
Note that the server-tags
parameter cannot be used for this command.
16.6.14. The remote-network4-list
, remote-network6-list
Commands
These commands are used to list all IPv4 or IPv6 shared networks for a server.
The following command retrieves all shared networks to be used by "server1" and "server2":
{
"command": "remote-network4-list",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ "server1", "server2" ]
}
}
The server-tags
parameter is mandatory and contains one or more server
tags. It may contain the keyword "all" to fetch the shared networks associated
with all servers. When the server-tags
list contains the
null
value, the returned response contains a list of unassigned shared
networks, i.e. the networks which are associated with no servers. For example:
{
"command": "remote-network4-list",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ null ]
}
}
The example response to this command when non-null server tags are specified looks similar to this:
{
"result": 0,
"text": "3 IPv4 shared network(s) found.",
"arguments": {
"shared-networks": [
{
"name": "ground floor",
"metadata": {
"server-tags": [ "all" ]
}
},
{
"name": "floor2",
"metadata": {
"server-tags": [ "server1" ]
}
},
{
"name": "floor3",
"metadata": {
"server-tags": [ "server2" ]
}
}
],
"count": 3
}
}
The returned information about each shared network merely contains the shared
network name and the metadata. To fetch detailed information about
the selected shared network, use the remote-network4-get
or
remote-network6-get
command.
The example response above contains three shared networks. One of the shared networks is associated with all servers, so it is included in the list of shared networks to be used by "server1" and "server2". The remaining two shared networks are returned because one of them is associated with "server1" and another one is associated with "server2".
When listing unassigned shared networks, the response looks similar to this:
{
"result": 0,
"text": "1 IPv4 shared network(s) found.",
"arguments": {
"shared-networks": [
{
"name": "fancy",
"metadata": {
"server-tags": [ null ]
}
}
],
"count": 1
}
}
The null
value in the metadata indicates that the
returned shared network is unassigned.
16.6.15. The remote-network4-set
, remote-network6-set
Commands
These commands create a new or replace an existing IPv4 or IPv6 shared
network in the database. The structure of the shared network information
is the same as in the Kea configuration file (see
Shared Networks in DHCPv4 and Shared Networks in DHCPv6 for details),
except that specifying subnets along with the shared
network information is not allowed. Including the subnet4
or subnet6
parameter
within the shared network information results in an error.
These commands are intended to be used for managing the shared
network-specific information and DHCP options. To associate and
disassociate the subnets with the shared networks, the
remote-subnet4-set
, remote-subnet6-set
commands should be used.
The following command adds the IPv6 shared network "level3" to the database:
{
"command": "remote-network6-set",
"arguments": {
"shared-networks": [
{
"name": "level3",
"interface": "eth0",
"option-data": [ {
"name": "sntp-servers",
"data": "2001:db8:1::1"
} ]
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
This command includes the interface
parameter, which sets the shared
network-level interface name. Any remaining shared-network-level parameters,
which are not specified with the command, will be marked as
"unspecified" in the database. The DHCP server uses the global
values for unspecified parameters or, if the global values are not
specified, the default values are used.
The server-tags
list is mandatory for this command and must include one or
more server tags. As a result, the shared network is associated with all listed
servers. The shared network may be associated with all servers connecting to the
database when the keyword "all" is included.
Note
As with other "set" commands, this command replaces all the information about the given shared network in the database, if the shared network already exists. Therefore, when sending this command, make sure to always include all parameters that must be specified for the updated shared-network instance. Any unspecified parameter will be marked unspecified in the database, even if its value was present prior to sending the command.
16.6.16. The remote-option-def4-del
, remote-option-def6-del
Commands
These commands are used to delete a DHCP option definition from the database. The option definition is identified by an option code and option space. For example:
{
"command": "remote-option-def6-del",
"arguments": {
"option-defs": [
{
"code": 1,
"space": "isc"
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
deletes the definition of the option associated with "server1", having the
code of 1 and belonging to the option space "isc". The default option spaces are
"dhcp4" and "dhcp6" for the DHCPv4 and DHCPv6 top-level options, respectively. If
there is no such option explicitly associated with "server1", no option is
deleted. To delete an option belonging to "all" servers, the keyword
"all" must be used as the server tag. The server-tags
list must contain exactly
one tag and cannot include the null
value.
16.6.17. The remote-option-def4-get
, remote-option-def6-get
Commands
These commands are used to fetch a specified DHCP option definition from the database. The option definition is identified by the option code and option space. The default option spaces are "dhcp4" and "dhcp6" for the DHCPv4 and DHCPv6 top-level options, respectively.
The following command retrieves a DHCPv4 option definition associated with all servers, having the code of 1 and belonging to the option space "isc":
{
"command": "remote-option-def4-get",
"arguments": {
"option-defs": [
{
"code": 1,
"space": "isc"
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
The server-tags
list must include exactly one server tag or the keyword
"all", and cannot contain the null value.
16.6.18. The remote-option-def4-get-all
, remote-option-def6-get-all
Commands
These commands are used to fetch all DHCP option definitions from the database for the given server or all servers. For example:
{
"command": "remote-option-def6-get-all",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
This command attempts to fetch all DHCPv6 option definitions associated
with "all" servers. The server-tags
list is mandatory for
this command and must include exactly one server tag or the keyword "all".
It cannot include the null
value.
The following is the example response to this command:
{
"result": 0,
"text": "1 DHCPv6 option definition(s) found.",
"arguments": {
"option-defs": [
{
"name": "bar",
"code": 1012,
"space": "dhcp6",
"type": "record",
"array": true,
"record-types": "ipv6-address, uint16",
"encapsulate": "",
"metadata": {
"server-tags": [ "all" ]
}
}
],
"count": 1
}
}
The response contains an option definition associated with all servers, as indicated by the metadata.
16.6.19. The remote-option-def4-set
, remote-option-def6-set
Commands
These commands create a new DHCP option definition or replace an existing option definition in the database. The structure of the option definition information is the same as in the Kea configuration file (see Custom DHCPv4 Options and Custom DHCPv6 Options). The following command creates the DHCPv4 option definition at the top-level "dhcp4" option space and associates it with "server1":
{
"command": "remote-option-def4-set",
"arguments": {
"option-defs": [
{
"name": "foo",
"code": 222,
"type": "uint32",
"array": false,
"record-types": "",
"space": "dhcp4",
"encapsulate": ""
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
The server-tags
list must include exactly one
server tag or the keyword "all", and cannot contain the
null
value.
16.6.20. The remote-option4-global-del
, remote-option6-global-del
Commands
These commands are used to delete a global DHCP option from the database. The option is identified by an option code and option space. For example:
{
"command": "remote-option4-global-del",
"arguments": {
"options": [
{
"code": 5,
"space": "dhcp4"
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
The "dhcp4" value represents the top-level option space where the standard DHCPv4
options belong. The server-tags
parameter is mandatory and must include a
single option tag or the keyword "all". If the explicit server tag is specified,
this command attempts to delete a global option associated with this
server. If there is no such option associated with the given server, no option
is deleted. To delete an option associated with all servers, the
keyword "all" must be specified.
16.6.21. The remote-option4-global-get
, remote-option6-global-get
Commands
These commands are used to fetch a global DHCP option from the database. The option is identified by the code and option space. The top-level option spaces where DHCP standard options belong are called "dhcp4" and "dhcp6" for the DHCPv4 and DHCPv6 servers, respectively.
The following command retrieves the IPv6 "DNS Servers" (code 23) option associated with all servers:
{
"command": "remote-option6-global-get",
"arguments": {
"options": [
{
"code": 23,
"space": "dhcp6"
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
The server-tags
parameter is mandatory and must include exactly one
server tag or the keyword "all". It cannot contain the null
value.
16.6.22. The remote-option4-global-get-all
, remote-option6-global-get-all
Commands
These commands are used to fetch all global DHCP options from the configuration database for the given server or for all servers. The following command fetches all global DHCPv4 options for "server1":
{
"command": "remote-option6-global-get-all",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
The server-tags
list is mandatory for this command and
must contain exactly one server tag or a keyword "all"; it cannot contain
the null
value.
The following is a example response to this command with a single option being associated with "server1" returned:
{
"result": 0,
"text": "DHCPv4 options found.",
"arguments": {
"options": [
{
"name": "domain-name-servers",
"code": 6,
"space": "dhcp4",
"csv-format": false,
"data": "192.0.2.3",
"metadata": {
"server-tags": [ "server1" ]
}
}
],
"count": 1
}
}
16.6.23. The remote-option4-global-set
, remote-option6-global-set
Commands
These commands create a new global DHCP option or replace an existing option in the database. The structure of the option information is the same as in the Kea configuration file (see Standard DHCPv4 Options and Standard DHCPv6 Options). For example:
{
"command": "remote-option6-global-set",
"arguments": {
"options": [
{
"name": "dns-servers",
"data": "2001:db8:1::1"
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
The server-tags
list is mandatory for this command
and must include exactly one server tag or the keyword "all"; it cannot
include the null
value. The command above associates
the option with the "server1" server.
Note that specifying an option name instead of the option code only works reliably for standard DHCP options. When specifying a value for a user-defined DHCP option, the option code should be indicated instead of the name. For example:
{
"command": "remote-option6-global-set",
"arguments": {
"options": [
{
"code": 1,
"space": "isc",
"data": "2001:db8:1::1"
}
],
"server-tags": [ "server1" ]
}
}
16.6.24. The remote-option4-network-del
, remote-option6-network-del
Commands
These commands are used to delete a shared-network-specific DHCP
option from the database. The option is identified by an option code
and option space and these two parameters are passed within the
options
list. Another list, shared-networks
, contains a map
with the name of the shared network from which the option is to
be deleted. If the option is not explicitly specified for this
shared network, no option is deleted. In particular, the given
option may be present for a subnet belonging to the shared network.
Such an option instance is not affected by this command as this
command merely deletes the shared-network-level option. To
delete a subnet-level option, the remote-option4-subnet-del
,
remote-option6-subnet-del
commands must be used instead.
The following command attempts to delete an option having the option code 5 in the top-level option space from the shared network "fancy".
{
"command": "remote-option4-network-del",
"arguments": {
"shared-networks": [
{
"name": "fancy"
}
],
"options": [
{
"code": 5,
"space": "dhcp4"
}
],
"remote": {
"type": "mysql"
}
}
}
The "dhcp4" value represents the top-level option space where the standard DHCPv4
options belong. The server-tags
parameter cannot be specified for this command.
16.6.25. The remote-option4-network-set
, remote-option6-network-set
Commands
These commands create a new shared-network-specific DHCP option or replace
an existing option in the database. The structure of the option information
is the same as in the Kea configuration file (see Standard DHCPv4 Options
and Standard DHCPv6 Options). The option information is carried in the
options
list. Another list, shared-networks
, contains a map with the
name of the shared network for which the option is to be set. If such an option
already exists for the shared network, it is replaced with the new instance.
{
"command": "remote-option6-network-set",
"arguments": {
"shared-networks": [
{
"name": "fancy"
}
],
"options": [
{
"name": "dns-servers",
"data": "2001:db8:1::1"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be specified for this command.
Specifying an option name instead of the option code only works reliably for standard DHCP options. When specifying a value for a user-defined DHCP option, the option code should be indicated instead of the name.
16.6.26. The remote-option6-pd-pool-del
Command
This command is used to delete a prefix delegation pool-specific DHCPv6
option from the database. The option is identified by an option code
and option space, and these two parameters are passed within the
options
list. Another list, pd-pools
, contains a map with the
prefix-delegation-pool prefix and length identifying the pool. If the
option is not explicitly specified for this pool, no option is deleted.
In particular, the given option may exist for a subnet containing
the specified pool. Such an option instance is not affected by this
command, as this command merely deletes a prefix delegation pool-level
option. To delete a subnet-level option, the
remote-option6-subnet-del
command must be used instead.
{
"command": "remote-option6-pd-pool-del",
"arguments": {
"pd-pools": [
{
"prefix": "3000::",
"prefix-len": 64
}
],
"options": [
{
"code": 23,
"space": "dhcp6"
}
],
"remote": {
"type": "mysql"
}
}
}
The "dhcp6" value represents the top-level option space where the standard DHCPv6
options belong. The server-tags
parameter cannot be specified for this command.
16.6.27. The remote-option6-pd-pool-set
Command
This command creates a new prefix delegation pool-specific DHCPv6 option or
replaces an existing option in the database. The structure of the option
information is the same as in the Kea configuration file (see Standard DHCPv4 Options
and Standard DHCPv6 Options). The option information is carried in the
options
list. Another list, pd-pools
, contains a map with the
prefix-delegation-pool prefix and the prefix length identifying the pool. If such an
option already exists for the prefix delegation pool, it is replaced with
the new instance.
For example:
{
"command": "remote-option6-pd-pool-set",
"arguments": {
"pd-pools": [
{
"prefix": "3001:1::",
"length": 64
}
],
"options": [
{
"name": "dns-servers",
"data": "2001:db8:1::1"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be specified for this command.
Specifying an option name instead of the option code only works reliably for standard DHCP options. When specifying a value for a user-defined DHCP option, the option code should be indicated instead of the name.
16.6.28. The remote-option4-pool-del
, remote-option6-pool-del
Commands
These commands are used to delete an address-pool-specific DHCP
option from the database. The option is identified by an option code
and option space, and these two parameters are passed within the
options
list. Another list, pools
, contains a map with the
IP address range or prefix identifying the pool. If the option
is not explicitly specified for this pool, no option is deleted.
In particular, the given option may exist for a subnet containing
the specified pool. Such an option instance is not affected by this
command, as this command merely deletes a pool-level option. To
delete a subnet-level option, the remote-option4-subnet-del
or remote-option6-subnet-del
command must be used instead.
The following command attempts to delete an option having the option code 5 in the top-level option space from an IPv4 address pool:
{
"command": "remote-option4-pool-del",
"arguments": {
"pools": [
{
"pool": "192.0.2.10 - 192.0.2.100"
}
],
"options": [
{
"code": 5,
"space": "dhcp4"
}
],
"remote": {
"type": "mysql"
}
}
}
The "dhcp4" value represents the top-level option space where the standard DHCPv4
options belong. The server-tags
parameter cannot be specified for this command.
16.6.29. The remote-option4-pool-set
, remote-option6-pool-set
Commands
These commands create a new address-pool-specific DHCP option or replace
an existing option in the database. The structure of the option information
is the same as in the Kea configuration file (see Standard DHCPv4 Options
and Standard DHCPv6 Options). The option information is carried in the
options
list. Another list, pools
, contains a map with the IP address
range or prefix identifying the pool. If such an option already exists for
the pool, it is replaced with the new instance.
For example:
{
"command": "remote-option4-pool-set",
"arguments": {
"pools": [
{
"pool": "192.0.2.10 - 192.0.2.100"
}
],
"options": [
{
"name": "domain-name-servers",
"data": "10.0.0.1"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be specified for this command.
Specifying an option name instead of the option code only works reliably for standard DHCP options. When specifying a value for a user-defined DHCP option, the option code should be indicated instead of the name.
16.6.30. The remote-option4-subnet-del
, remote-option6-subnet-del
Commands
These commands are used to delete a subnet-specific DHCP option
from the database. The option is identified by an option code
and option space, and these two parameters are passed within the
options
list. Another list, subnets
, contains a map with the
identifier of the subnet from which the option is to be deleted.
If the option is not explicitly specified for this subnet, no
option is deleted.
The following command attempts to delete an option having the option code 5 in the top-level option space from the subnet having an identifier of 123.
{
"command": "remote-option4-subnet-del",
"arguments": {
"subnets": [
{
"id": 123
}
],
"options": [
{
"code": 5,
"space": "dhcp4"
}
],
"remote": {
"type": "mysql"
}
}
}
The "dhcp4" value represents the top-level option space where the standard DHCPv4
options belong. The server-tags
parameter cannot be specified for this command.
16.6.31. The remote-option4-subnet-set
, remote-option6-subnet-set
Commands
These commands create a new subnet-specific DHCP option or replace an existing
option in the database. The structure of the option information is the same as
in the Kea configuration file (see Standard DHCPv4 Options
and Standard DHCPv6 Options). The option information is carried in the
options
list. Another list, subnets
, contains a map with the identifier of
the subnet for which the option is to be set. If such an option already exists
for the subnet, it is replaced with the new instance.
{
"command": "remote-option6-subnet-set",
"arguments": {
"subnets": [
{
"id": 123
}
],
"options": [
{
"name": "dns-servers",
"data": "2001:db8:1::1"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be specified for this command.
Specifying an option name instead of the option code only works reliably for the standard DHCP options. When specifying a value for the user-defined DHCP option, the option code should be indicated instead of the name.
16.6.32. The remote-subnet4-del-by-id
, remote-subnet6-del-by-id
Commands
This is the first variant of the commands used to delete an IPv4 or IPv6 subnet from the database. It uses the subnet ID to identify the subnet. For example, to delete the IPv4 subnet with an ID of 5:
{
"command": "remote-subnet4-del-by-id",
"arguments": {
"subnets": [
{
"id": 5
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be used with this command.
16.6.33. The remote-subnet4-del-by-prefix
, remote-subnet6-del-by-prefix
Commands
This is the second variant of the commands used to delete an IPv4 or IPv6 subnet from the database. It uses the subnet prefix to identify the subnet. For example:
{
"command": "remote-subnet6-del-by-prefix",
"arguments": {
"subnets": [
{
"subnet": "2001:db8:1::/64"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be used with this command.
16.6.34. The remote-subnet4-get-by-id
, remote-subnet6-get-by-id
Commands
This is the first variant of the commands used to fetch an IPv4 or IPv6 subnet from the database. It uses a subnet ID to identify the subnet. For example:
{
"command": "remote-subnet4-get-by-id",
"arguments": {
"subnets": [
{
"id": 5
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be used with this command.
16.6.35. The remote-subnet4-get-by-prefix
, remote-subnet6-get-by-prefix
Commands
This is the second variant of the commands used to fetch an IPv4 or IPv6 subnet from the database. It uses a subnet prefix to identify the subnet. For example:
{
"command": "remote-subnet6-get-by-prefix",
"arguments": {
"subnets": [
{
"subnet": "2001:db8:1::/64"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be used with this command.
16.6.36. The remote-subnet4-list
, remote-subnet6-list
Commands
These commands are used to list all IPv4 or IPv6 subnets from the database for selected servers or all servers. The following command retrieves all servers to be used by "server1" and "server2":
{
"command": "remote-subnet4-list",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ "server1", "server2" ]
}
}
The server-tags
parameter is mandatory and contains one or
more server tags. It may contain the keyword "all", to fetch the subnets
associated with all servers. When the server-tags
list
contains the null
value, the returned response contains a list
of unassigned subnets, i.e. the subnets which are associated with no servers.
For example:
{
"command": "remote-subnet4-list",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ null ]
}
}
The example response to this command when non-null server tags are specified looks similar to this:
{
"result": 0,
"text": "2 IPv4 subnet(s) found.",
"arguments": {
"subnets": [
{
"id": 1,
"subnet": "192.0.2.0/24",
"shared-network-name": null,
"metadata": {
"server-tags": [ "server1", "server2" ]
}
},
{
"id": 2,
"subnet": "192.0.3.0/24",
"shared-network-name": null,
"metadata": {
"server-tags": [ "all" ]
}
}
],
"count": 2
}
}
The returned information about each subnet is limited to the subnet identifier,
prefix, and associated shared network name. To retrieve full
information about the selected subnet, use
the remote-subnet4-get-by-id
/ remote-subnet6-get-by-id
command
or the remote-subnet4-get-by-prefix
/ remote-subnet6-get-by-prefix
command.
The example response above contains two subnets. One of the subnets is associated with both servers: "server1" and "server2". The second subnet is associated with all servers, so it is also present in the configurations for "server1" and "server2".
When listing unassigned subnets, the response will look similar to this:
{
"result": 0,
"text": "1 IPv4 subnet(s) found.",
"arguments": {
"subnets": [
{
"id": 3,
"subnet": "192.0.4.0/24",
"shared-network-name": null,
"metadata": {
"server-tags": [ null ]
}
}
],
"count": 1
}
}
The null
value in the metadata indicates that the
returned subnet is unassigned.
16.6.37. The remote-subnet4-set
, remote-subnet6-set
Commands
These commands are used to create a new IPv4 or IPv6 subnet or replace an existing subnet in the database. Setting the subnet also associates or disassociates the subnet with a shared network.
The structure of the subnet information is similar to the structure used
in the configuration file (see DHCPv4 Server Configuration and
DHCPv6 Server Configuration). The subnet information conveyed in the
remote-subnet4-set
or remote-subnet6-set
command
must include the additional parameter
shared-network-name
, which denotes whether the subnet belongs to a
shared network.
Consider the following example:
{
"command": "remote-subnet4-set",
"arguments": {
"subnets": [
{
"id": 5,
"subnet": "192.0.2.0/24",
"shared-network-name": "level3",
"pools": [ { "pool": "192.0.2.100-192.0.2.200" } ],
"option-data": [ {
"name": "routers",
"data": "192.0.2.1"
} ]
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
It creates the subnet and associates it with the "level3" shared
network. The "level3" shared network must be created with the remote-network4-set
command prior to creating the subnet.
If the created subnet must be global - that is, not associated with any shared
network - the shared-network-name
must be explicitly set to
null
:
{
"command": "remote-subnet4-set",
"arguments": {
"subnets": [
{
"id": 5,
"subnet": "192.0.2.0/24",
"shared-network-name": null,
"pools": [ { "pool": "192.0.2.100-192.0.2.200" } ],
"option-data": [ {
"name": "routers",
"data": "192.0.2.1"
} ]
}
],
"server-tags": [ "all" ]
}
}
The subnet created in the previous example is replaced with the new subnet having the same parameters, but it becomes global.
The shared-network-name
parameter is mandatory for the
remote-subnet4-set
command. The server-tags
list is mandatory and must
include one or more server tags. As a result, the subnet is associated with all
of the listed servers. It may also be associated with all servers connecting
to the database when the keyword "all" is used as the server tag.
Note
As with other "set" commands, this command replaces all the information about the particular subnet in the database, if the subnet information is already present. Therefore, when sending this command, make sure to always include all parameters that must be specified for the updated subnet instance. Any unspecified parameter will be marked as unspecified in the database, even if its value was present prior to sending the command.
16.6.38. The remote-class4-del
, remote-class6-del
Commands
These commands delete a DHCPv4 or DHCPv6 client class by name. If any client
classes in the database depend on the deleted class, an error is returned in
response to this command. In this case, to successfully delete the class,
the dependent client classes must be deleted first. Use the
remote-class4-get-all
command to fetch all client classes and find
the dependent ones.
{
"command": "remote-class4-del",
"arguments": {
"client-classes": [
{
"name": "foo"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be used for this command because client
classes are uniquely identified by name.
16.6.39. The remote-class4-get
, remote-class6-get
Commands
These commands retrieve DHCPv4 or DHCPv6 client class information by a client-class name.
{
"command": "remote-class4-get",
"arguments": {
"client-classes": [
{
"name": "foo"
}
],
"remote": {
"type": "mysql"
}
}
}
The server-tags
parameter cannot be used for this command because client
classes are uniquely identified by name.
A response to the command looks similar to this:
{
"result": 0,
"text": "DHCPv4 client class 'foo' found.",
"arguments": {
"client-classes": [
{
"name": "foo",
"metadata": {
"server-tags": [ "all" ]
}
}
],
"count": 1
}
}
16.6.40. The remote-class4-get-all
, remote-class6-get-all
Commands
These commands retrieve all DHCPv4 or DHCPv6 client classes for a particular server, multiple explicitly listed servers, and/or all servers. A given server has its own server-specific tag and also has the "all" server tag; these commands retrieve the classes for both an individual server and for "all" servers. For example, the following command retrieves all client classes defined for "server1" as well as the client classes defined for "all" servers:
{
"command": "remote-class4-get-all",
"arguments": {
"remote": {
"type": "mysql"
},
"server-tags": [ "server1" ]
}
}
The server-tags
parameter is mandatory and contains one or more server
tags. If other server tags are specified, "all" does not need to be included
in server-tags
, as every server automatically also has the "all" server tag.
If server-tags
contains only the keyword "all", only the client classes associated
with "all" servers are returned. When the server-tags
list contains the
null
value, the returned response contains a list of unassigned client
classes, i.e. the networks which are associated with no servers.
A response to the command looks similar to this:
{
"result": 0,
"text": "2 DHCPv4 client class(es) found.",
"arguments": {
"client-classes": [
{
"name": "foo",
"metadata": {
"server-tags": [ "all" ]
}
},
{
"name": "bar",
"test": "member('foo')",
"metadata": {
"server-tags": [ "all" ]
}
}
],
"count": 2
}
}
16.6.41. The remote-class4-set
, remote-class6-set
Commands
These commands insert a new or replace an existing DHCPv4 or DHCPv6 client class in the database. The client class information structure is the same as in the Kea configuration file (see Client Classification in DHCPv4 and Client Classification in DHCPv6 for details).
{
"command": "remote-class4-set",
"arguments": {
"client-classes": [
{
"name": "foo",
"test": "member('KNOWN') or member('bar')",
"option-def": [
{
"name": "configfile",
"code": 224,
"type": "string"
}
],
"option-data": [
{
"name": "configfile",
"data": "1APC"
}
]
}
],
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
Client-class ordering rules described in Using Expressions in Classification apply to the classes inserted into the database. They imply that the class bar referenced in the test expression must exist in the database when issuing the above command.
By default, a new client class is inserted at the end of the class hierarchy in the database and can reference any class associated with the same server tag or with the special server tag "all". If an existing class is updated, it remains at its current position within the class hierarchy.
However, the class commands allow the position of the inserted
or updated client class to be specified. The optional follow-class-name
parameter can be
included in the command to indicate the name of the existing class after which
the managed class should be placed. Suppose there are two DHCPv6 classes in the
database: first-class and second-class. To add a new class, third-class,
between these two, use a command similar to the following:
{
"command": "remote-class6-set",
"arguments": {
"client-classes": [
{
"name": "third-class",
"test": "member('first-class')"
}
],
"follow-class-name": "first-class",
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
Note that third-class can depend on first-class because it is placed after first-class; third-class cannot depend on second-class because it is placed before it. However, second-class could be updated to depend on third-class.
The follow-class-name
parameter can be explicitly set to null
, e.g.:
{
"command": "remote-class6-set",
"arguments": {
"client-classes": [
{
"name": "third-class",
"test": "member('first-class')"
}
],
"follow-class-name": null,
"remote": {
"type": "mysql"
},
"server-tags": [ "all" ]
}
}
It yields the same behavior as if the follow-class-name
parameter were not included,
i.e. the new class is appended at the end of the class hierarchy, and the updated
class remains at the current position.
16.7. libdhcp_class_cmds.so
: Class Commands
This hook library exposes several control commands for manipulating client classes (part of the Kea DHCP servers' configurations) without the need to restart those servers. Using these commands it is possible to add, update, delete, and list the client classes configured for a given server.
Note
libdhcp_class_cmds.so
is available only to ISC customers with
a paid support contract. For more information on subscription options,
please complete the form at https://www.isc.org/contact.
16.7.1. The class-add
Command
The class-add
command adds a new client class to the DHCP server
configuration. This class is appended at the end of the list of classes
used by the server and may depend on any of the already-configured
client classes.
The following example demonstrates how to add a new client class to the DHCPv4 server configuration:
{
"command": "class-add",
"arguments": {
"client-classes": [
{
"name": "ipxe_efi_x64",
"test": "option[93].hex == 0x0009",
"next-server": "192.0.2.254",
"server-hostname": "hal9000",
"boot-file-name": "/dev/null"
}
]
}
}
Note that the client-classes
parameter is a JSON list, but it allows
only a single client class to be present.
Here is the response to the class-add
command in our example:
{
"result": 0,
"text": "Class 'ipxe_efi_x64' added."
}
16.7.2. The class-update
Command
The class-update
command updates an existing client class in the
DHCP server configuration. If the client class with the given name
does not exist, the server returns the result code of 3, which means that
the server configuration is not modified and the client class does not
exist. The class-add
command must be used instead to create the new
client class.
The class-update
command has the same argument structure as the
class-add
command:
{
"command": "class-update",
"arguments": {
"client-classes": [
{
"name": "ipxe_efi_x64",
"test": "option[93].hex == 0x0017",
"next-server": "0.0.0.0",
"server-hostname": "xfce",
"boot-file-name": "/dev/null"
}
]
}
}
Here is the response for our example:
{
"result": 0,
"text": "Class 'ipxe_efi_x64' updated."
}
Any parameter of the client class can be modified with this command,
except name
. There is currently no way to rename the class, because
the class name is used as a key for searching the class to be updated.
To achieve a similar effect to renaming the class, an existing class can
be removed with the class-del
command and then added again with a
different name using class-add
. Note, however, that the class with
the new name will be added at the end of the list of configured classes.
As with other update commands, this command overwrites all the contents of an
entry. If the client class previously had a resource assigned to it, and the
class-update
command is missing the resource, it is deleted from the server
configuration. If an incremental update of the class is desired, it can
be achieved by issuing a class-get
to get the current state
of the client class, selecting the client class from the response, modifying it
to the required outcome, and then issuing the client-update
command with the
resulting client class attached.
16.7.3. The class-del
Command
The class-del
command is used to remove a particular class from the server
configuration. The class to be removed is identified by name. The class
is not removed if there are other classes depending on it; to remove
such a class, the dependent classes must be removed first.
The following is a sample command removing the ipxe_efi_x64
class:
{
"command": "class-del",
"arguments": {
"name": "ipxe_efi_x64"
}
}
Here is the response to the class-del
command in our example, when
the specified client class has been found:
{
"result": 0,
"text": "Class 'ipxe_efi_x64' deleted."
}
If the class does not exist, the result of 3 is returned.
16.7.4. The class-list
Command
class-list
is used to retrieve a list of all client classes. This
command includes no arguments:
{
"command": "class-list"
}
Here is the response of the server in our example, including the list of client classes:
{
"result": 0,
"text": "2 classes found",
"arguments": {
"client-classes": [
{
"name": "ipxe_efi_x64"
},
{
"name": "pxeclient"
}
]
}
}
Note that the returned list does not contain full class definitions, but
merely class names. To retrieve full class information, the
class-get
command should be used.
16.7.5. The class-get
Command
class-get
is used to retrieve detailed information about a specified
class. The command structure is very simple:
{
"command": "class-get",
"arguments": {
"name": "pxeclient"
}
}
If the class with the specified name does not exist, the status code of 3 is returned. If the specified client class exists, the class details are returned in the following format:
{
"result": 0,
"text": "Class 'pxeclient' definition returned",
"arguments": {
"client-classes": [
{
"name": "pxeclient",
"only-in-additional-list": true,
"test": "option[vendor-class-identifier].text == 'PXEClient'",
"option-def": [
{
"name": "configfile",
"code": 209,
"type": "string"
}
],
"option-data": [ ],
"next-server": "0.0.0.0",
"server-hostname": "xfce",
"boot-file-name": "/dev/null"
}
]
}
}
Note that the example above is DHCPv4-specific; the last three
parameters are only returned by the DHCPv4 server and are never returned
by the DHCPv6 server. Also, some of the parameters provided in this
example may not be returned if they are not specified for the class.
Specifically, only-in-additional-list
, test
, and option-def
are not
returned if they are not specified for the class.
Note
As of Kea version 2.7.4, only-if-required
has been replaced with
only-in-additional-list
and deprecated. In order to allow users time
to migrate class commands will still accept it as input but translate it
to only-in-additional-list
on output. Eventually support for the
old name will be removed.
16.8. libdhcp_ddns_tuning.so
: DDNS Tuning
This hook library adds support for fine-tuning various DNS update aspects. It currently supports procedural host-name generation and the ability to skip performing DDNS updates for select clients.
Note
libdhcp_ddns_tuning.so
is available as a premium
hook library from ISC. Please visit https://www.isc.org/shop/ to purchase
the premium hook libraries, or contact us at https://www.isc.org/contact for
more information.
The library, which was added in Kea 2.1.5, can be loaded by the kea-dhcp4
and kea-dhcp6
daemons by adding it to the hooks-libraries
element of the
server's configuration:
{
"hooks-libraries": [
{
"library": "/usr/local/lib/libdhcp_ddns_tuning.so",
"parameters": {
...
}
},
...
],
...
}
16.8.1. Procedural Host-Name Generation
This hook library provides the ability to generate host names procedurally, based on an expression. The expression can be defined globally in the hook parameters, using hostname-expr. If defined globally, it applies to all hosts in all subnets. The expressions can use all tokens defined in Client Classification. An example of a global expression is shown below:
{
"hooks-libraries": [
{
"library": "/usr/local/lib/libdhcp_ddns_tuning.so",
"parameters": {
"hostname-expr": "'host-'+hexstring(pkt4.mac,'-')",
...
}
},
...
],
...
}
It is also possible to define this parameter in a subnet, using the user-context mechanism.
If defined at the subnet level, the expression applies to a specific subnet only. If the
subnet expression is defined as empty, ""
, it suppresses (or disables) the use of a
global expression for that subnet. An example subnet expression is shown below:
{
"subnet4": [{
"subnet": "192.0.2.0/24",
"pools": [{
"pool": "192.0.2.10 - 192.0.2.20"
} ],
// This is a subnet-specific user context.
"user-context": {
"ddns-tuning": {
"hostname-expr": "'guest-'+int8totext(substring(pkt4.yiaddr, 0,1))+'-' \
+int8totext(substring(pkt4.yiaddr, 1,2))+'-' \
+int8totext(substring(pkt4.yiaddr, 2,3))+'-' \
+int8totext(substring(pkt4.yiaddr, 3,4))"
},
"last-modified": "2017-09-04 13:32",
"description": "you can put anything you like here",
"phones": [ "x1234", "x2345" ],
"devices-registered": 42,
"billing": false
}
}],
...
}
Note
The expression value above uses a backslash, \
, to show line continuation. This is for
clarity only and is not valid JSON supported by Kea parsing. The actual value must
be expressed on a single line.
Note
Privacy should be taken into consideration when generating a host name. The host name is usually inserted into the DNS, which is a public system. Exposing identifiers that can be used to track devices, such as a MAC address, are usually a very bad idea. The global expression example here used a MAC address for simplicity.
16.8.1.1. DHCPv4 Host-Name Generation
With this library installed, the behavior for kea-dhcp4
when forming host names in
response to a client query (e.g. DISCOVER, REQUEST) is as follows:
1. If a host name is supplied via a host reservation, use it with the DDNS behavioral parameters to form the final host name. Go to step 4.
2. If the client supplied an FQDN option (option 81), use the domain name value specified within it, with the DDNS behavioral parameters, to form the final host name. Go to step 4.
3. If the client supplied a host-name option (option 12), use the host name specified within it, with the DDNS behavioral parameters, to form the final host name.
4. If there is a
ddns-tuning
in-scope host-name expression (either global or subnet), calculate the host name using the expression. If the calculated value is not a fully qualified name and there is an in-scopeddns-qualifying-suffix
, append the suffix.5. If the value calculated by the hook is not an empty string and is different than the host name formed in steps 1 or 2, the calculated value becomes the final host name.
16.8.1.2. DHCPv6 Host-Name Generation
With this library installed, the behavior for kea-dhcp6
when forming host names in
response to a client query (e.g. SOLICIT, REQUEST, RENEW, REBIND) is as follows:
1. If the client supplied an FQDN option (option 39), use the domain name value specified within it, with the DDNS behavioral parameters, to form the final host name. Go to step 4.
2. If the client did not supply an FQDN but
ddns-replace-client-name
is eitheralways
orwhen-not-present
, then calculate the final form of the host name and use it to create an outbound FQDN. Go to step 4.3. If there is no outbound FQDN at this point, client-name processing for this packet stops. Without an outbound FQDN there is no way to communicate a host name to the client.
4. If a host name is supplied via a host reservation, use it along with the DDNS behavioral parameters to form the final host name; it supersedes the FQDN value calculated in steps 1 or 2.
5. If there is a
ddns-tuning
in-scope host name expression (either global or subnet), calculate the host name using the expression. If the calculated value is not a fully qualified name and there is an in-scopeddns-qualifying-suffix
, append the suffix.6. If the value calculated by the hook is not an empty string and is different than the host name formed in steps 1 or 2, the calculated value becomes the final host name.
16.8.2. Skipping DDNS Updates
libdhcp_ddns_tuning.so
also provides the ability to skip DDNS updates on a
per-client basis. The library recognizes a special client class, "SKIP_DDNS"; when a
client is matched to this class, the Kea servers (kea-dhcp4
and kea-dhcp6
) do not
send DDNS update requests (NCRs) to kea-dhcp-ddns
. A common use case would be
to skip DDNS updates for fixed-address host reservations. This is done easily by
simply assigning the class to the host reservation as shown below:
{
"reservations": [
{
"hw-address": "01:02:03:04:05:06",
"ip-address": "192.0.2.1",
"client-classes": [ "SKIP_DDNS", "foo", "bar" ]
}]
}
The libdhcp_ddns_tuning.so
hook library notes the
presence of the "SKIP_DDNS"
class in the
client's class list each time the client requests, renews, or releases its lease,
and instructs kea-dhcp4
to bypass sending DDNS updates. A similar workflow is
supported for kea-dhcp6
:
{
"reservations": [
{
"duid": "01:02:03:04:05:06",
"ip-address": "2001:db8::1",
"client-classes": [ "SKIP_DDNS", "foo", "bar" ]
}]
}
Although "SKIP_DDNS" is a special class, it can be defined with a test expression. Defining it as shown below would omit DDNS updates for all KNOWN clients:
{
"client-classes":[
{
"name": "SKIP_DDNS",
"test": "member('KNOWN')"
}]
}
Note
The libdhcp_ddns_tuning.so
hook library must be
loaded for the "SKIP_DDNS"
class to have an effect.
16.9. libdhcp_flex_id.so
: Flexible Identifier for Host Reservations
The Kea software provides a way to handle host reservations that include addresses, prefixes, options, client classes, and other features. The reservation can be based on hardware address, DUID, circuit-id, or client-id in DHCPv4 and on hardware address or DUID in DHCPv6. However, there are sometimes scenarios where the reservation is more complex; it may use options other than those mentioned above, use parts of specific options, or perhaps even use a combination of several options and fields to uniquely identify a client. Those scenarios are addressed by the Flexible Identifiers hook application.
Note
libdhcp_flex_id.so
is available as a premium
hook library from ISC. Please visit https://www.isc.org/shop/ to purchase
the premium hook libraries, or contact us at https://www.isc.org/contact for
more information.
libdhcp_flex_id.so
allows the definition of an expression, using notation initially
used only for client classification. (See
Using Expressions in Classification for a detailed description of
the syntax available.) One notable difference is that for client
classification, the expression currently has to evaluate to either true
or false
, while the flexible identifier expression is expected to
evaluate to a string that will be used as an identifier. It is a valid case
for the expression to evaluate to an empty string (e.g. in cases where a
client does not send specific options). This expression is then
evaluated for each incoming packet, and this evaluation generates an
identifier that is used to identify the client. In particular, there may
be host reservations that are tied to specific values of the flexible
identifier.
The library can be loaded similarly to other hook libraries. It
takes a mandatory parameter identifier-expression
and some optional boolean
parameters like replace-client-id
and ignore-iaid
:
"Dhcp6": {
"hooks-libraries": [
{
"library": "/path/libdhcp_flex_id.so",
"parameters": {
"identifier-expression": "expression",
"replace-client-id": false,
"ignore-iaid": false
}
},
...
]
}
The flexible identifier library supports both DHCPv4 and DHCPv6.
Let's consider a case of an IPv6 network that has an
independent interface for each of its connected customers. Customers are
able to plug in whatever device they want, so any type of identifier
(e.g. a client-id) is unreliable. Therefore, the operator may decide to
use an option inserted by a relay agent to differentiate between
clients. In this particular deployment, the operator has verified that the
interface-id is unique for each customer-facing interface, so it
is suitable for usage as a reservation. However, only the first six bytes of
the interface-id are interesting, because the remaining bytes are either
randomly changed or not unique between devices. Therefore, the customer
decides to use the first six bytes of the interface-id option inserted by the
relay agent. After adding flex-id
, the host-reservation-identifiers
goal
can be achieved by using the following configuration:
"Dhcp6": {
"subnet6": [{
# subnet definition starts here
"reservations": [{
"flex-id": "'port1234'",
# value of the first 8 bytes of the interface-id
"ip-addresses": [ "2001:db8::1" ]
},
...
],
...
},
...
],
# end of subnet definitions
"host-reservation-identifiers": ["duid", "flex-id"],
# add "flex-id" to reservation identifiers
"hooks-libraries": [
{
"library": "/path/libdhcp_flex_id.so",
"parameters": {
"identifier-expression": "substring(relay6[0].option[18].hex,0,8)"
}
},
...
],
...
}
Note
Care should be taken when adjusting the expression. If the expression
changes, then all the flex-id
values may change, possibly rendering
all reservations based on flex-id
unusable until they are manually updated.
It is strongly recommended that administrators start with the expression and a
handful of reservations, and then adjust the expression as needed. Once
the desired result is obtained with the expression, host reservations
can be deployed on a broader scale.
flex-id
values in host reservations can be specified in two ways. First,
they can be expressed as a hex string, e.g. the string "bar" can be represented
as 626174. Alternatively, it can be expressed as a quoted value (using
double and single quotes), e.g. "'bar'". The former is more convenient
for printable characters, while hex string values are more convenient
for non-printable characters and do not require the use of the
hexstring
operator.
"Dhcp6": {
"subnet6": [{
# subnet definition starts here
"reservations": [{
"flex-id": "01:02:03:04:05:06",
# value of the first 8 bytes of the interface-id
"ip-addresses": [ "2001:db8::1" ]
},
...
],
...
},
...
],
# end of subnet definitions
"host-reservation-identifiers": ["duid", "flex-id"],
# add "flex-id" to reservation identifiers
"hooks-libraries": [
{
"library": "/path/libdhcp_flex_id.so",
"parameters": {
"identifier-expression": "vendor[4491].option[1026].hex"
}
},
...
],
...
}
Note
One less common scenario where the examples above may prove useful is for DHCPv6 clients that change their DUIDs between exchanges. Certain PXE clients are known to behave this way.
16.9.1. The replace-client-id
Flag
When replace-client-id
is set to false
(which is the default setting),
libdhcp_flex_id.so
uses the evaluated flexible identifier solely for
identifying host reservations, i.e. searching for reservations within a
database. This is the functional equivalent of other identifiers, similar
to hardware address or circuit-id. However, this mode of operation
implies that if a client device is replaced, it may cause a
conflict between an existing lease (allocated to the old device) and the
new lease being allocated to the new device. The conflict arises
because the same flexible identifier is computed for the replaced device,
so the server will try to allocate the same lease. The mismatch between
client identifiers sent by the new device and the old device causes the server
to refuse this new allocation until the old lease expires. A
manifestation of this problem is dependent on the specific expression used
as the flexible identifier, and is likely to appear if only options
and other parameters are used that identify where the device is connected
(e.g. circuit-id), rather than the device identification itself (e.g.
MAC address).
libdhcp_flex_id.so
offers a way to overcome the problem with lease
conflicts by dynamically replacing the client identifier (or DUID in DHCPv6)
with a value derived from the flexible identifier. The server
processes the client's query as if the flexible identifier were sent in the
client identifier (or DUID) option. This guarantees that a returning
client (for which the same flexible identifier is evaluated) will be
assigned the same lease, despite the client identifier and/or MAC address
change.
The following is a stub configuration that enables this behavior:
"Dhcp4": {
"hooks-libraries": [
{
"library": "/path/libdhcp_flex_id.so",
"parameters": {
"identifier-expression": "expression",
"replace-client-id": true
}
},
...
]
}
In the DHCPv4 case, the value derived from the flexible identifier is formed by prepending one byte with a value of zero to the flexible identifier. In the DHCPv6 case, it is formed by prepending two zero bytes before the flexible identifier.
Note that for this mechanism to take effect, the DHCPv4 server must be
configured to respect the client identifier option value during lease
allocation, i.e. match-client-id
must be set to true
. See
Using Client Identifier and Hardware Address for details. No additional settings are
required for DHCPv6.
If the replace-client-id
option is set to true
, the value of the
echo-client-id
parameter (which governs whether to send back a
client-id option) is ignored.
The libdhcp_lease_cmds.so: Lease Commands for Easier Lease Management section describes commands used to retrieve,
update, and delete leases using various identifiers, such as hw-address
and
client-id
. libdhcp_lease_cmds.so
does not natively support querying
for leases by flexible identifier. However, when replace-client-id
is
set to true
, it makes it possible to query for leases using a value
derived from the flexible identifier. In DHCPv4, the query
looks similar to this:
{
"command": "lease4-get",
"arguments": {
"identifier-type": "client-id",
"identifier": "00:54:64:45:66",
"subnet-id": 44
}
}
where the hexadecimal value of "54:64:45:66" is a flexible identifier computed for the client.
In DHCPv6, the corresponding query looks something like this:
{
"command": "lease6-get",
"arguments": {
"identifier-type": "duid",
"identifier": "00:00:54:64:45:66",
"subnet-id": 10
}
}
16.9.2. The ignore-iaid
Flag
When ignore-iaid
is set to true
(the default value is false
),
libdhcp_flex_id.so
causes the Kea DHCPv6 server to ignore the IAID value
from incoming IPv6 packets. This parameter is ignored by the Kea DHCPv4 server.
If the packet contains only one IA_NA, the IAID value will be changed to 0
and stored as such in the lease storage. Similarly, if the packet contains only
one IA_PD, the IAID value will be changed to 0
and stored as such in the
lease storage. The IAID is restored to its initial value in the response back
to the client. The change is visible in the identifier expression if the IAID is
part of the expression.
Note
To avoid lease conflicts, if the incoming packet contains more than one IA_NA, the IAID value is not changed on any of the IA_NAs. Similarly, if the incoming packet contains more than one IA_PD, the IAID value is not changed on any of the IA_PDs.
Warning
This functionality breaks RFC compliance and should be enabled only if required. When enabled, a warning message is issued at configure time.
16.10. libdhcp_flex_option.so
: Flexible Option Actions for Option Value Settings
This library allows administrators to define an action to take, for a given
option, based upon on the result of an expression. These actions are carried
out during the final stages of constructing a query response packet, just
before it is sent to the client. The three actions currently supported are
add
, supersede
, and remove
.
Note
libdhcp_flex_option.so
is part of the open source code and is
available to every Kea user.
The syntax used for the action expressions is the same syntax used for client classification and the Flexible Identifier hook library; see either Using Expressions in Classification or libdhcp_flex_id.so: Flexible Identifier for Host Reservations for a detailed description of the syntax.
The add
and supersede
actions use an expression returning a
string, and do nothing if the string is empty. The
remove
application uses an expression returning true
or false
,
and does nothing on false
. When it is necessary to set an option to the
empty value this mechanism does not work, but a client class can be
used instead.
The add
action adds an option only when the option does not already
exist and the expression does not evaluate to the empty string.
The supersede
action is similar, but it overwrites the option value
if it already exists. The remove
action removes the option from
the response packet if it already exists and the expression evaluates to
true.
The option to which an action applies may be specified by either its numeric code or its name; either the code or the name must be specified. The option space is DHCPv4 or DHCPv6, depending on the server where the hook library is loaded.
libdhcp_flex_option.so
can be loaded
by either the kea-dhcp4
or kea-dhcp6
process. It takes a mandatory options
parameter with a list of
per-option parameter maps, with code
, name
, add
, supersede
, and
remove
actions. Action entries take a string value representing an
expression.
{
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/local/lib/libdhcp_flex_option.so",
"parameters": {
"options": [
{
"code": 67,
"add": "ifelse(option[host-name].exists,concat(option[host-name].text,'.boot'),'')"
}
]
}
}
]
}
}
If (and only if) the query includes a host-name
option (code 12), a
boot-file-name
option (code 67) is added to the response with the host name
followed by .boot
for content.
A commonly discussed use case is modifying the DHCPv4 subnet mask option (code 1). The following example demonstrates that capability, as all ingress packets identified by the gateway address 192.168.0.1 are met with a /32 subnet mask in the response:
{
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/local/lib/libdhcp_flex_option.so",
"parameters": {
"options": [
{
"code": 1,
"supersede": "ifelse(pkt4.giaddr==192.168.0.1, '255.255.255.255', '')"
}
]
}
}
]
}
}
The Flexible Option library supports both DHCPv4 and DHCPv6.
The add
and supersede
actions take an optional
csv-format
boolean parameter. If not specified or set to false
, the
option data is set using the raw value of the evaluated expression. When it is
configured to true
, this value is parsed using the option definition from
the option data specified in the configuration file. This eases option setting
for options using complex record formats or fully qualified domain names.
For instance, if the expression evaluation returns "example.com" and
the option is defined with the fqdn
type, the domain name is
encoded into DNS binary format.
Since Kea 2.1.4, the client-class
parameter specifies a class guard,
and takes a client-class name. If not empty, the client's packet needs to
belong to tne specified class for this entry to be used.
It is also possible to have multiple entries for the same option,
but each entry must have exactly one action. If the option is not defined
in dhcp4
for DHCPv4 or dhcp6
for DHCPv6, the location of
the option definition can be specified using its name, with the new
space
parameter.
Since Kea 2.1.4, sub-options are supported with a new entry, sub-options
,
which replaces the action in the configuration of the container option,
i.e. the option where sub-options are located.
The sub-options
parameter takes a list of sub-option entries, each
containing:
code
- specifies the sub-option code; either thecode
orname
must be specified. If both are given, they must match or the configuration is rejected at load time.name
- specifies the sub-option name; either thecode
orname
must be specified. If both are given, they must match or the configuration is rejected at load time.space
- specifies the space where the sub-option can be defined. This parameter is optional, because it can be found in the container option definition. The configuration is rejected if no valid space name is available at load time. Note that vendor spaces are supported for the DHCPv4vivso-suboptions
and for the DHCPv6vendor-opts
, both pre-defined (e.g. DoCSIS vendor id 4491) or custom.add
- (action) adds a sub-option only if it does not already exist and the expression does not evaluate to the empty string.supersede
- (action) adds or overwrites a sub-option if the expression does not evaluate to the empty string.remove
- (action) removes a sub-option if it already exists and the expression evaluates to true.container-add
- a boolean value that specifies whether the container option should be created, if it does not exist in theadd
andsupersede
action. If not specified, it defaults totrue
.container-remove
- a boolean value that specifies whether the container option should be deleted, if it remains empty after the removal of a sub-option by theremove
action. If not specified, it defaults totrue
.csv-format
- a boolean value that specifies whether the raw value of the evaluated expression is used (false, default) or parsed using the sub-option definition (true).client-class
- specifies whether the sub-option entry must be skipped when the query does not belong to the specified client class. Note that the similar parameter in the container option entry applies to the wholesub-options
list.
For instance, this configuration adds a string sub-option in the DHCPv4
vendor-encapsulated-options
(code 43) option. This option
encapsulates the vendor-encapsulated-options
space.
{
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/local/lib/libdhcp_flex_option.so",
"parameters": {
"options": [
{
"code": 43,
"sub-options": [
{
"code": 1,
"add": "'foobar'"
}
]
}
]
}
}
]
}
}
16.11. libddns_gss_tsig.so
: Sign DNS Updates With GSS-TSIG
This hook library allows the kea-dhcp-ddns
server to use
GSS-TSIG to sign DNS updates. For a full discussion of GSS-TSIG in Kea,
please see GSS-TSIG.
Note
libddns_gss_tsig.so
is available only to ISC customers with
a paid support contract. For more information on subscription options,
please complete the form at https://www.isc.org/contact.
16.12. libdhcp_ha.so
: High Availability Outage Resilience for Kea Servers
This hook library can be loaded on a pair of DHCPv4 or DHCPv6 servers, to increase the reliability of the DHCP service in the event of an outage on one server.
Note
libdhcp_ha.so
is part of the open source code and is
available to every Kea user. It was previously available only to ISC
customers with a paid support contract.
High Availability (HA) of the DHCP service is provided by running multiple cooperating server instances. If any of these instances becomes unavailable for any reason (DHCP software crash, Control Agent software crash, power outage, hardware failure), a surviving server instance can continue providing reliable service to clients. Many DHCP server implementations include the "DHCP Failover" protocol, whose most significant features are communication between the servers, partner failure detection, and lease synchronization between the servers. However, the DHCPv4 failover standardization process was never completed by the IETF. The DHCPv6 failover standard (RFC 8156) was published, but it is complex and difficult to use, has significant operational constraints, and is different from its v4 counterpart. Although it may be useful to use a "standard" failover protocol, most Kea users are simply interested in a working solution which guarantees high availability of the DHCP service. Therefore, the Kea HA hook library derives major concepts from the DHCP failover protocol but uses its own solutions for communication and configuration. It offers its own state machine, which greatly simplifies its implementation and generally fits better into Kea, and it provides the same features in both DHCPv4 and DHCPv6. This document intentionally uses the term "high availability" rather than "failover" to emphasize that it is not the failover protocol implementation.
The following sections describe the configuration and operation of the Kea HA hook library.
16.12.1. Supported Configurations
The Kea HA hook library supports three configurations, also known as HA modes:
load-balancing
, hot-standby
, and passive-backup
. In the
load-balancing
mode, two servers respond to DHCP requests. The
load-balancing
function is implemented as described in RFC
3074, with each server responding to
half the received DHCP queries. When one of the servers allocates a lease for a
client, it notifies the partner server over the control channel (via the RESTful
API), so the partner can save the lease information in its own database. If the
communication with the partner is unsuccessful, the DHCP query is dropped and
the response is not returned to the DHCP client. If the lease update is
successful, the response is returned to the DHCP client by the server which has
allocated the lease. By exchanging lease updates, both servers get a copy of all
leases allocated by the entire HA setup, and either server can be switched to
handle the entire DHCP traffic if its partner becomes unavailable.
In the load-balancing
configuration, one of the servers must be designated
as primary
and the other as secondary
. Functionally, there is no
difference between the two during normal operation. However, this distinction is
required when the two servers are started at (nearly) the same time and have to
synchronize their lease databases. The primary server synchronizes the database
first. The secondary server waits for the primary server to complete the lease
database synchronization before it starts the synchronization.
In the hot-standby
configuration, one of the servers is designated as
primary
and the other as standby
. During normal operation, the primary
server is the only one that responds to DHCP requests. The standby server
receives lease updates from the primary over the control channel; however, it
does not respond to any DHCP queries as long as the primary is running or, more
accurately, until the standby considers the primary to be offline. If the
standby server detects the failure of the primary, it starts responding to all
DHCP queries.
Note
Operators often wonder whether to use load-balancing
or hot-standby
mode. The load-balancing
mode has the benefit of splitting the DHCP load
between two instances, reducing the traffic processed by each of them.
However, it is not always clear to the operators that using the
load-balancing
mode requires manually splitting the address pools between
two Kea instances using client classification, to preclude both servers from
allocating the same address to different clients.
Such a split is not needed in the hot-standby
mode. Thus, the benefit
of using hot-standby
over load-balancing
is that the former has a
simpler configuration. Conversely, load-balancing
has higher performance
potential at the cost of more complex configuration.
See Load-Balancing Configuration for details on how to split the pools
using client classification.
In the configurations described above, both the primary and secondary/standby
are referred to as active
servers, because they receive lease updates and
can automatically react to the partner's failures by responding to the DHCP
queries which would normally be handled by the partner. The HA hook library
supports another server type/role: backup
. The use of a backup server is
optional, and can be implemented in both load-balancing
and hot-standby
setup, in addition to the active servers. There is no limit on the number of
backup servers in the HA setup; however, the presence of backup servers may
increase the latency of DHCP responses, because not only do active servers send
lease updates to each other, but also to the backup servers. The active servers
do not expect acknowledgments from the backup servers before responding to the
DHCP clients, so the overhead of sending lease updates to the backup servers is
minimized.
In the last supported configuration, passive-backup
, there is only one
active server and typically one or more backup servers. A passive-backup
configuration with no backup servers is also accepted, but it is no different
than running a single server with no HA function at all.
The passive-backup
configuration is used in situations when an administrator
wants to take advantage of the backup server(s) as an additional storage for
leases without running the full-blown failover setup. In this case, if the
primary server fails, the DHCP service is lost; it requires the administrator to
manually restart the primary to resume DHCP service. The administrator may also
configure one of the backup servers to provide DHCP service to the clients, as
these servers should have accurate or nearly accurate information about the
allocated leases. The major advantage of the passive-backup
mode is that it
provides some redundancy of the lease information but with better performance of
the primary server responding to the DHCP queries.
The primary server does not have to wait for acknowledgments to the lease
updates from the backup servers before it sends a response to the DHCP client.
This reduces the response time compared to the load-balancing
and
hot-standby
cases, in which the server responding to the DHCP query has to
wait for the acknowledgment from the other active server before it can respond
to the client.
Note
An interesting use case for a single active server running in the
passive-backup
mode is a notification service, in which software
pretending to be a backup server receives live notifications about allocated
and deleted leases from the primary server and can display them on a
monitoring screen, trigger alerts, etc.
16.12.2. Clocks on Active Servers
Synchronized clocks are essential for the HA setup to operate reliably. The servers share lease information - via lease updates and during synchronization of the databases - including the time when the lease was allocated and when it expires. Some clock skew between the servers participating in the HA setup usually exists; this is acceptable as long as the clock skew is relatively low, compared to the lease lifetimes. However, if the clock skew becomes too high, the different lease expiration times on different servers may cause the HA system to malfunction. For example, one server may consider a lease to be expired when it is actually still valid. The lease reclamation process may remove a name associated with this lease from the DNS, causing problems when the client later attempts to renew the lease.
Each active server monitors the clock skew by comparing its current time with
the time returned by its partner in response to the ha-heartbeat
command. This
gives a good approximation of the clock skew, although it does not take into
account the time between the partner sending the response and the receipt of
this response by the server which sent the ha-heartbeat
command. If the clock skew
exceeds 30 seconds, a warning log message is issued. The administrator may
correct this problem by synchronizing the clocks (e.g. using NTP); the servers
should notice the clock skew correction and stop issuing the warning.
If the clock skew is not corrected and exceeds 60 seconds, the HA service on
each of the servers is terminated, i.e. the state machine enters the
terminated
state. The servers will continue to respond to DHCP clients (as
in the load-balancing
or hot-standby
mode), but will exchange neither
lease updates nor heartbeats and their lease databases will diverge. In this
case, the administrator should synchronize the clocks and restart the servers.
Note
It is possible to restart the servers one at a time, in no particular order.
The clocks must be in sync before restarting the servers. A restarted server
remains in the waiting
state until the partner is also restarted. If the
partner is not restarted within 10 minutes, the restarted server transitions
back to the terminated
state to continue serving the DHCP clients. Restart
both servers to resume the normal HA service.
Note
The clock skew is only assessed between two active servers, and only the
active servers enter the terminated
state if the skew is too high. The
clock skew between active and backup servers is not assessed, because active
servers do not exchange heartbeat messages with backup servers.
16.12.3. HTTPS Support
Since Kea 1.9.7, the High Availability hook library supports HTTPS via TLS, as described in TLS/HTTPS Support.
The HTTPS configuration parameters are:
trust-anchor
- specifies the name of a file or directory where the certification authority certificate of a Control Agent can be found.cert-file
- specifies the name of the file containing the end-entity certificate to use.key-file
- specifies the private key of the end-entity certificate to use.
These parameters can be configured at the global and peer levels. When configured at both levels the peer value is used, allowing common values to be shared.
The three parameters must be either all not specified (HTTPS disabled) or all specified (HTTPS enabled). Specification of the empty string is considered not specified; this can be used, for instance, to disable HTTPS for a particular peer when it is enabled at the global level.
As the High Availability hook library is an HTTPS client, there is no
cert-required
parameter in this hook configuration.
This parameter can be set in the Control Agent to require and verify a client
certificate in client-server communication. It does not affect communication
between HA peers at the client side; see below for information on the server
side.
Before Kea 2.1.7 using HTTPS in the HA setup required use of the Control Agent on all peers. (See TLS/HTTPS Support for Control Agent TLS configuration).
Since Kea 2.1.7 the HTTPS server side is supported:
the peer entry for the server name is used for the TLS setting.
the new
require-client-certs
parameter specifies whether client certificates are required and verified, i.e. likecert-required
. It defaults totrue
and is an HA config (vs. peer config) parameter.
Kea 2.1.7 added a new security feature with the restrict-commands
HA config
parameter: when set to true
, commands which are not used by the hook are
rejected. The default is false
.
The following is an example of an HA server pair and Control Agent configuration
for hot-standby
with TLS.
Server 1:
{
"Dhcp4": {
"hooks-libraries": [{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
}, {
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [{
"this-server-name": "server1",
"trust-anchor": "/usr/lib/kea/CA.pem",
"cert-file": "/usr/lib/kea/server1_cert.pem",
"key-file": "/usr/lib/kea/server1_key.pem",
"mode": "hot-standby",
"heartbeat-delay": 10000,
"max-response-delay": 60000,
"max-ack-delay": 5000,
"max-unacked-clients": 5,
"peers": [{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary",
"auto-failover": true
}, {
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "standby",
"auto-failover": true
}]
}]
}
}],
"subnet4": [{
"id": 1,
"subnet": "192.0.3.0/24",
"pools": [{
"pool": "192.0.3.100 - 192.0.3.250"
}]
}]
}
}
Server 2:
{
"Dhcp4": {
"hooks-libraries": [{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
}, {
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [{
"this-server-name": "server2",
"trust-anchor": "/usr/lib/kea/CA.pem",
"cert-file": "/usr/lib/kea/server2_cert.pem",
"key-file": "/usr/lib/kea/server2_key.pem",
"mode": "hot-standby",
"heartbeat-delay": 10000,
"max-response-delay": 60000,
"max-ack-delay": 5000,
"max-unacked-clients": 5,
"peers": [{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary",
"auto-failover": true
}, {
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "standby",
"auto-failover": true
}]
}]
}
}],
"subnet4": [{
"id": 1,
"subnet": "192.0.3.0/24",
"pools": [{
"pool": "192.0.3.100 - 192.0.3.250"
}]
}]
}
}
Control Agent on Server 1:
{
"Control-agent": {
"http-host": "192.168.56.33",
"http-port": 8000,
"control-sockets": {
"dhcp4": {
"socket-type": "unix",
"socket-name": "/var/run/kea/control_socket"
}
},
"trust-anchor": "/var/lib/kea/CA.pem",
"cert-file": "/var/lib/kea/server1_cert.pem",
"key-file": "/var/lib/kea/server1_key.pem",
"cert-required": true
}
}
Control Agent on Server 2:
{
"Control-agent": {
"http-host": "192.168.56.66",
"http-port": 8000,
"control-sockets": {
"dhcp4": {
"socket-type": "unix",
"socket-name": "/var/run/kea/control_socket"
}
},
"trust-anchor": "/var/lib/kea/CA.pem",
"cert-file": "/var/lib/kea/server2_cert.pem",
"key-file": "/var/lib/kea/server2_key.pem",
"cert-required": true
}
}
16.12.4. Server States
A DHCP server operating within an HA setup runs a state machine, and the state
of the server can be retrieved by its peers using the ha-heartbeat
command
sent over the RESTful API. If the partner server does not respond to the
ha-heartbeat
command within the specified amount of time, the communication
is considered interrupted and the server may, depending on the configuration,
use additional measures (described later in this document) to verify that the
partner is still operating. If it finds that the partner is not operating, the
server transitions to the partner-down
state to handle all the DHCP traffic
directed to the system.
In this case, the surviving server continues to send the ha-heartbeat
command to detect when the partner wakes up. At that time, the partner
synchronizes the lease database. When it is again ready to operate, the
surviving server returns to normal operation, i.e. the load-balancing
or
hot-standby
state.
The following is the list of all possible server states:
backup
- normal operation of the backup server. In this state it receives lease updates from the active server(s).communication-recovery
- an active server running inload-balancing
mode may transition to this state when it experiences communication issues with a partner server over the control channel. This is an intermediate state between theload-balancing
andpartner-down
states. In this state the server continues to respond to DHCP queries but does not send lease updates to the partner; lease updates are queued and are sent when normal communication is resumed. If communication does not resume within the time specified, the primary server then transitions to thepartner-down
state. Thecommunication-recovery
state was introduced to ensure reliable DHCP service when both active servers remain operational but the communication between them is interrupted for a prolonged period of time. Either server can be configured to never enter this state by setting thedelayed-updates-limit
to 0 (please refer to Load-Balancing Configuration, later in this chapter, for details on this parameter). Disabling entry into thecommunication-recovery
state causes the server to begin testing for thepartner-down
state as soon as the server is unable to communicate with its partner.
Note
In Kea 1.9.4, with the introduction of delayed-updates-limit
, the default
server's behavior in load-balancing
mode changed. When a server
experiences communication issues with its partner, it now enters the
communication-recovery
state and queues lease updates until communication
is resumed. Prior to Kea 1.9.4, a server that could not communicate with its
partner in load-balancing
mode would immediately begin the transition to
the partner-down
state.
hot-standby
- normal operation of the active server running in thehot-standby
mode; both the primary and the standby server are in this state during their normal operation. The primary server responds to DHCP queries and sends lease updates to the standby server and to any backup servers that are present.load-balancing
- normal operation of the active server running in theload-balancing
mode; both the primary and the secondary server are in this state during their normal operation. Both servers respond to DHCP queries and send lease updates to each other and to any backup servers that are present.in-maintenance
- an active server transitions to this state as a result of being notified by its partner that the administrator requested maintenance of the HA setup. The administrator requests the maintenance by sending theha-maintenance-start
command to the server which is supposed to take over the responsibility for responding to the DHCP clients while the other server is taken offline for maintenance. If the server is in thein-maintenance
state it can be safely shut down. The partner transitions to thepartner-down
state immediately after discovering that the server in maintenance has been shut down.partner-down
- an active server transitions to this state after detecting that its partner (another active server) is offline. The server does not transition to this state if only a backup server is unavailable. In thepartner-down
state the active server responds to all DHCP queries, including those queries which are normally handled by the server that is now unavailable.partner-in-maintenance
- an active server transitions to this state after receiving aha-maintenance-start
command from the administrator. The server in this state becomes responsible for responding to all DHCP requests. The server sends aha-maintenance-notify
command to the partner, which should enter thein-maintenance
state. The server remaining in thepartner-in-maintenance
state keeps sending lease updates to the partner until it finds that the partner has stopped responding to those lease updates, heartbeats, or any other commands. In this case, the server in thepartner-in-maintenance
state transitions to thepartner-down
state and keeps responding to the queries, but no longer sends lease updates.passive-backup
- a primary server running in thepassive-backup
HA mode transitions to this state immediately after it boots up. The primary server in this state responds to all DHCP traffic and sends lease updates to the backup servers it is connected to. By default, the primary server does not wait for acknowledgments from the backup servers and responds to a DHCP query right after sending lease updates to all backup servers. If any of the lease updates fail, a backup server misses the lease update but the DHCP client is still provisioned. This default configuration can be changed by setting thewait-backup-ack
configuration parameter totrue
, in which case the primary server always waits for the acknowledgements and drops the DHCP query if sending any of the corresponding lease updates fails. This improves lease database consistency between the primary and the secondary. However, if a communication failure between the active server and any of the backups occurs, it effectively causes the failure of the DHCP service from the DHCP clients' perspective.ready
- an active server transitions to this state after synchronizing its lease database with an active partner. This state indicates to the partner (which may be in thepartner-down
state) that it should return to normal operation. If and when it does, the server in theready
state also starts normal operation.syncing
- an active server transitions to this state to fetch leases from the active partner and update the local lease database. When in this state, the server issues thedhcp-disable
command to disable the DHCP service of the partner from which the leases are fetched. The DHCP service is disabled for a maximum time of 60 seconds, after which it is automatically re-enabled, in case the syncing partner was unable to re-enable the service. If the synchronization completes successfully, the synchronizing server issues theha-sync-complete-notify
command to notify the partner. In most states, the partner re-enables its DHCP service to continue responding to the DHCP queries. In thepartner-down
state, the partner first ensures that communication between the servers is re-established before enabling the DHCP service. The syncing operation is synchronous; the server waits for an answer from the partner and does nothing else while the lease synchronization takes place. A server that is configured not to synchronize the lease database with its partner, i.e. when thesync-leases
configuration parameter is set tofalse
, will never transition to this state. Instead, it transitions directly from thewaiting
state to theready
state.terminated
- an active server transitions to this state when the High Availability hook library is unable to further provide reliable service and a manual intervention of the administrator is required to correct the problem. Various issues with the HA setup may cause the server to transition to this state. While in this state, the server continues responding to DHCP clients based on the HA mode selected (load-balancing
orhot-standby
), but lease updates are not exchanged and heartbeats are not sent. Once a server has entered theterminated
state, it remains in this state until it is restarted. The administrator must correct the issue which caused this situation prior to restarting the server (e.g. synchronize the clocks); otherwise, the server will return to theterminated
state once it finds that the issue persists.waiting
- each started server instance enters this state. A backup server transitions directly from this state to thebackup
state. An active server sends a heartbeat to its partner to check its state; if the partner appears to be unavailable, the server transitions to thepartner-down
state. If the partner is available, the server transitions to thesyncing
orready
state, depending on the setting of thesync-leases
configuration parameter. If both servers appear to be in thewaiting
state (concurrent startup), the primary server transitions to the next state first. The secondary or standby server remains in thewaiting
state until the primary transitions to theready
state.
Note
Currently, restarting the HA service from the terminated
state requires
restarting the DHCP server or reloading its configuration.
Whether the server responds to DHCP queries and which queries it responds to is a matter of the server's state, if no administrative action is performed to configure the server otherwise. The following table provides the default behavior for various states.
The DHCP Service Scopes
denote which group of received DHCP queries the
server responds to in the given state. The HA configuration must specify a
unique name for each server within the HA setup. This document uses the
following convention within the provided examples: "server1" for a primary
server, "server2" for the secondary or standby server, and "server3" for the
backup server. In real life any names can be used as long as they remain unique.
An in-depth explanation of the scopes can be found below.
State |
Server Type |
DHCP Service |
DHCP Service Scopes |
---|---|---|---|
backup |
backup server |
disabled |
none |
communication-recovery |
primary or secondary (load-balancing mode only) |
enabled |
"HA_server1" or "HA_server2" |
hot-standby |
primary or standby (hot-standby mode) |
enabled |
"HA_server1" if primary, none otherwise |
load-balancing |
primary or secondary (load-balancing mode) |
enabled |
"HA_server1" or "HA_server2" |
in-maintenance |
active server |
disabled |
none |
partner-down |
active server |
enabled |
all scopes |
partner-in-maintenance |
active server |
enabled |
all scopes |
passive-backup |
active server |
enabled |
all scopes |
ready |
active server |
disabled |
none |
syncing |
active server |
disabled |
none |
terminated |
active server |
enabled |
same as in the load-balancing or hot-standby state |
waiting |
any server |
disabled |
none |
In the load-balancing
mode there are two scopes specified for the active
servers: "HA_server1" and "HA_server2". The DHCP queries load-balanced to
server1
belong to the "HA_server1" scope and the queries load-balanced to
server2
belong to the "HA_server2" scope. If either server is in the
partner-down
state, the active partner is responsible for serving both
scopes.
In the hot-standby
mode, there is only one scope - "HA_server1" - because
only server1
is responding to DHCP queries. If that server becomes
unavailable, server2
becomes responsible for this scope.
The backup servers do not have their own scopes. In some cases they can be used
to respond to queries belonging to the scopes of the active servers. Also, a
backup server which is neither in the partner-down
state nor in normal
operation serves no scopes.
The scope names can be used to associate pools, subnets, and networks with certain servers, so that only these servers can allocate addresses or prefixes from those pools, subnets, or networks. This is done via the client classification mechanism (see Load Balancing With Advanced Classification for more details).
16.12.5. Scope Transition in a Partner-Down Case
When one of the servers finds that its partner is unavailable, it starts serving
clients from both its own scope and the scope of the unavailable partner. This
is straightforward for new clients, i.e. those sending DHCPDISCOVER (DHCPv4) or
Solicit (DHCPv6), because those requests are not sent to any particular server.
The available server responds to all such queries when it is in the
partner-down
state.
When a client renews a lease, it sends its DHCPREQUEST (DHCPv4) or Renew (DHCPv6) message directly to the server which has allocated the lease being renewed. If this server is no longer available, the client will get no response. In that case, the client continues to use its lease and attempts to renew until the rebind timer (T2) elapses. The client then enters the rebinding phase, in which it sends a DHCPREQUEST (DHCPv4) or Rebind (DHCPv6) message to any available server. The surviving server receives the rebinding request and typically extends the lifetime of the lease. The client then continues to contact that new server to renew its lease as appropriate.
If and when the other server once again becomes available, both active servers
will eventually transition to the load-balancing
or hot-standby
state,
in which they will again be responsible for their own scopes. Some clients
belonging to the scope of the restarted server will try to renew their leases
via the surviving server, but this server will no longer respond to them; the
client will eventually transition back to the correct server via the rebinding
mechanism.
16.12.6. Load-Balancing Configuration
The following is the configuration snippet to enable high availability on the
primary server within the load-balancing
configuration. The same
configuration should be applied on the secondary and backup servers, with the
only difference that this-server-name
should be set to "server2" and
"server3" on those servers, respectively.
Note
Remember that load-balancing
mode requires the address pools and
delegated prefix pools to be split between the active servers. During normal
operation, the servers use non-overlapping pools to avoid allocating the same
lease to different clients by both instances. A server only uses the pool
fragments owned by the partner when the partner is not running. See the notes
in Supported Configurations highlighting differences between the
load-balancing
and hot-standby
modes. The semantics of pool
partitioning is explained further in this section.
The Load Balancing With Advanced Classification section provides advanced
pool-partitioning examples.
"Dhcp4": {
"hooks-libraries": [{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
}, {
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [{
"this-server-name": "server1",
"mode": "load-balancing",
"heartbeat-delay": 10000,
"max-response-delay": 60000,
"max-ack-delay": 5000,
"max-unacked-clients": 5,
"max-rejected-lease-updates": 10,
"delayed-updates-limit": 100,
"peers": [{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary",
"auto-failover": true
}, {
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "secondary",
"auto-failover": true
}, {
"name": "server3",
"url": "http://192.168.56.99:8000/",
"role": "backup",
"basic-auth-user": "foo",
"basic-auth-password": "bar",
"auto-failover": false
}]
}]
}
}],
"subnet4": [{
"id": 1,
"subnet": "192.0.3.0/24",
"pools": [{
"pool": "192.0.3.100 - 192.0.3.150",
"client-class": "HA_server1"
}, {
"pool": "192.0.3.200 - 192.0.3.250",
"client-class": "HA_server2"
}],
"option-data": [{
"name": "routers",
"data": "192.0.3.1"
}],
"relay": { "ip-address": "10.1.2.3" }
}]
}
Two hook libraries must be loaded to enable HA: libdhcp_lease_cmds.so
and
libdhcp_ha.so
. The latter implements the HA feature, while the former
enables control commands required by HA to fetch and manipulate leases on the
remote servers. In the example provided above, it is assumed that Kea libraries
are installed in the /usr/lib
directory. If Kea is not installed in the
/usr
directory, the hook libraries' locations must be updated accordingly.
The HA configuration is specified within the scope of libdhcp_ha.so
.
Note that while the top-level parameter high-availability
is a list, only a
single entry is currently supported.
The following are the global parameters which control the server's behavior with respect to HA:
this-server-name
- is a unique identifier of the server within this HA setup. It must match one of the servers specified within thepeers
list.mode
- specifies an HA mode of operation. The currently supported modes areload-balancing
andhot-standby
.heartbeat-delay
- specifies a duration in milliseconds between sending the last heartbeat (or other command sent to the partner) and the next heartbeat. Heartbeats are sent periodically to gather the status of the partner and to verify whether the partner is still operating. The default value of this parameter is 10000 ms.max-response-delay
- specifies a duration in milliseconds since the last successful communication with the partner, after which the server assumes that communication with the partner is interrupted. This duration should be greater than theheartbeat-delay
; typically it should be a multiple ofheartbeat-delay
. When the server detects that communication is interrupted, it may transition to thepartner-down
state (whenmax-unacked-clients
is 0) or trigger the failure-detection procedure using the values of the two parameters below. The default value of this parameter is 60000 ms.max-ack-delay
- is one of the parameters controlling partner failure-detection. When communication with the partner is interrupted, the server examines the values of the "secs" field (DHCPv4) or "elapsed time" option (DHCPv6), which denote how long the DHCP client has been trying to communicate with the DHCP server. This parameter specifies the maximum time in milliseconds for the client to try to communicate with the DHCP server, after which this server assumes that the client failed to communicate with the DHCP server (is unacknowledged or "unacked"). The default value of this parameter is 10000.max-unacked-clients
- specifies how many "unacked" clients are allowed (seemax-ack-delay
) before this server assumes that the partner is offline and transitions to thepartner-down
state. The special value of 0 is allowed for this parameter, which disables the failure-detection mechanism. In this case, a server that cannot communicate with its partner over the control channel assumes that the partner server is down and transitions to thepartner-down
state immediately. The default value of this parameter is 10.max-rejected-lease-updates
- specifies how many lease updates for distinct clients can fail, due to a conflict between the lease and the partner configuration or state, before the server transitions to theterminated
state. Conflict can be a sign of a misconfiguration; usually, a small number of conflicted leases are acceptable because they affect only a few devices. However, if the conflicts occur for many devices (e.g., an entire subnet), the HA service becomes unreliable and should be terminated, and the problem must be manually corrected by an administrator. It is up to the administrator to select the highest acceptable value ofmax-rejected-lease-updates
. The default value is 10. The special value of 0 configures the server to never terminate the HA service due to lease conflicts. If the value is 1, the server transitions to theterminated
state when the first conflict occurs. This parameter does not pertain to conflicting lease updates sent to the backup servers.delayed-updates-limit
- specifies the maximum number of lease updates which can be queued while the server is in thecommunication-recovery
state. This parameter was introduced in Kea 1.9.4. The special value of 0 configures the server to never transition to thecommunication-recovery
state and the server behaves as in earlier Kea versions, i.e. if the server cannot reach its partner, it goes straight into thepartner-down
state. The default value of this parameter is 100.
Note
The max-rejected-lease-updates
parameter was introduced in Kea 2.3.1.
Previously, the server did not differentiate between a lease update
failure due to a non-functioning partner and a failure due to a conflict
(e.g., configuration issues).
As a result, the server could sometimes transition to the partner-down
state even though the partner was operating normally, but only certain leases
had issues. Conflicts should no longer cause such a transition. However,
depending on the max-rejected-lease-updates
setting, too many conflicts
can lead to termination of the High Availability service. In that case, both
servers continue to respond to DHCP queries but no longer send lease updates.
The values of max-ack-delay
and max-unacked-clients
must be selected
carefully, taking into account the specifics of the network in which the DHCP
servers are operating. The server in question may not respond to some DHCP
clients following administrative policy, or the server may drop malformed
queries from clients. Therefore, selecting too low a value for the
max-unacked-clients
parameter may result in a transition to the
partner-down
state even though the partner is still operating. On the other
hand, selecting too high a value may result in never transitioning to the
partner-down
state if the DHCP traffic in the network is very low (e.g. at
night), because the number of distinct clients trying to communicate with the
server could be lower than the max-unacked-clients
setting.
In some cases it may be useful to disable the failure-detection mechanism
altogether, if the servers are located very close to each other and network
partitioning is unlikely, i.e. failure to respond to heartbeats is only possible
when the partner is offline. In such cases, set max-unacked-clients
to 0.
The delayed-updates-limit
parameter is used to enable or disable the
communication-recovery
procedure, and controls the server's behavior in the
communication-recovery
state. This parameter can only be used in the
load-balancing
mode.
If a server in the load-balancing
state experiences communication issues
with its partner (a heartbeat or lease-update failure), the server transitions
to the communication-recovery
state. In this state, the server keeps
responding to DHCP queries but does not send lease updates to the partner. The
lease updates are queued until communication is re-established, to ensure that
DHCP service remains available even in the event of the communication loss
between the partners. There may appear to be communication loss when either one
of the servers has terminated, or when both servers remain available but cannot
communicate with each other. In the former case, the surviving server will
follow the normal procedure and should eventually transition to the
partner-down
state. In the latter case, both servers should transition to
the communication-recovery
state and should never transition to the
partner-down
state (if max-unacked-clients
is set to a non-zero value),
because all DHCP queries are answered and neither server would see any unacked
DHCP queries.
Introduction of the communication-recovery
procedure was motivated by issues
which may appear when two servers remain online but the communication between
them remains interrupted for a period of time. In earlier Kea versions, the
servers having communication issues used to drop DHCP packets before
transitioning to the partner-down
state. In some cases they both
transitioned to the partner-down
state, which could potentially result in
allocations of the same IP addresses or delegated prefixes to different clients
by both servers. By entering the intermediate communication-recovery
state,
these problems are avoided.
If a server in the communication-recovery
state re-establishes communication
with its partner, it tries to send the partner all of the outstanding lease
updates it has queued. This is done synchronously and may take a considerable
amount of time before the server transitions to the load-balancing
state and
resumes normal operation.
The maximum number of lease updates which can be queued in the
communication-recovery
state is controlled by delayed-updates-limit
.
If the limit is exceeded, the server stops queuing lease updates and performs a
full database synchronization after re-establishing the connection with the
partner, instead of sending outstanding lease updates before transitioning to
the load-balancing
state. Even if the limit is exceeded, the server in the
communication-recovery
state remains responsive to DHCP clients.
It may be preferable to set higher values of delayed-updates-limit
when
there is a risk of prolonged communication interruption between the servers and
when the lease database is large, to avoid costly lease-database synchronization.
On the other hand, if the lease database is small, the time required to send
outstanding lease updates may be longer than the lease-database synchronization.
In such cases it may be better to use a lower value, e.g. 10. The default value
of 100 is a reasonable compromise and should work well in most deployments with
moderate traffic.
Note
This parameter is new and values for it that work well in some environments may not work well in others. Feedback from users will help us build a better working set of recommendations.
The peers
parameter contains a list of servers within this HA setup.
This configuration must contain at least one primary and one secondary server.
It may also contain an unlimited number of backup servers. In this example,
there is one backup server which receives lease updates from the active servers.
Since Kea version 1.9.0, basic HTTP authentication is available to protect the Kea control agent against local attackers.
These are the parameters specified for each of the peers within this list:
name
- specifies a unique name for the server.url
- specifies the URL to be used to contact this server over the control channel. Other servers use this URL to send control commands to that server.basic-auth-user
- specifies the user ID for basic HTTP authentication. If not specified or specified as an empty string, no authentication header is added to HTTP transactions. It must not contain the colon (:) character.basic-auth-password
- specifies the password for basic HTTP authentication. This parameter is ignored when the user ID is not specified or is empty. The password is optional; if not specified, an empty password is used.basic-auth-password-file
- is an alternative tobasic-auth-password
: instead of presenting the password in the configuration file it is specified in the file indicated by this parameter.role
- denotes the role of the server in the HA setup. The following roles are supported in theload-balancing
configuration:primary
,secondary
, andbackup
. There must be exactly one primary and one secondary server in theload-balancing
setup.auto-failover
- a boolean value which denotes whether a server detecting a partner's failure should automatically start serving the partner's clients. The default value of this parameter istrue
.
In our example configuration above, both active servers can allocate leases from
the subnet "192.0.3.0/24". This subnet contains two address pools:
"192.0.3.100 - 192.0.3.150" and "192.0.3.200 - 192.0.3.250", which are
associated with HA server scopes using client classification. When server1
processes a DHCP query, it uses the first pool for lease allocation. Conversely,
when server2
processes a DHCP query it uses the second pool. If either of
the servers is in the partner-down
state, the other can serve leases from
both pools; it selects the pool which is appropriate for the received query. In
other words, if the query would normally be processed by server2
but this
server is not available, server1
allocates the lease from the pool of
"192.0.3.200 - 192.0.3.250". The Kea control agent in front of server3
requires basic HTTP authentication, and authorizes the user ID "foo" with the
password "bar".
Note
The url
schema can be http
or https
, but since Kea version 1.9.6
the https
schema requires a TLS setup. The hostname part must be an IPv4
address or an IPv6 address between square brackets, e.g.
http://[2001:db8::1]:8080/
. Names are not accepted.
16.12.7. Load Balancing With Advanced Classification
In the previous section, we provided an example of a load-balancing
configuration with client classification limited to the "HA_server1" and
"HA_server2" classes, which are dynamically assigned to the received DHCP
queries. In many cases, HA is needed in deployments which already use some other
client classification.
Suppose there is a system which classifies devices into two groups: "phones" and
"laptops", based on some classification criteria specified in the Kea
configuration file. Both types of devices are allocated leases from different
address pools. Introducing HA in load-balancing
mode results in a further
split of each of those pools, as each server allocates leases for some phones
and some laptops. This requires each of the existing pools to be split between
"HA_server1" and "HA_server2", so we end up with the following classes:
"phones_server1"
"laptops_server1"
"phones_server2"
"laptops_server2"
The corresponding server configuration, using advanced classification (and the
member
expression), is provided below. For brevity's sake, the HA hook
library configuration has been removed from this example.
{
"Dhcp4": {
"client-classes": [{
"name": "phones",
"test": "substring(option[60].hex,0,6) == 'Aastra'"
}, {
"name": "laptops",
"test": "not member('phones')"
}, {
"name": "phones_server1",
"test": "member('phones') and member('HA_server1')"
}, {
"name": "phones_server2",
"test": "member('phones') and member('HA_server2')"
}, {
"name": "laptops_server1",
"test": "member('laptops') and member('HA_server1')"
}, {
"name": "laptops_server2",
"test": "member('laptops') and member('HA_server2')"
}],
"hooks-libraries": [{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
}, {
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [{
}]
}
}],
"subnet4": [{
"id": 1,
"subnet": "192.0.3.0/24",
"pools": [{
"pool": "192.0.3.100 - 192.0.3.125",
"client-class": "phones_server1"
}, {
"pool": "192.0.3.126 - 192.0.3.150",
"client-class": "laptops_server1"
}, {
"pool": "192.0.3.200 - 192.0.3.225",
"client-class": "phones_server2"
}, {
"pool": "192.0.3.226 - 192.0.3.250",
"client-class": "laptops_server2"
}],
"option-data": [{
"name": "routers",
"data": "192.0.3.1"
}],
"relay": { "ip-address": "10.1.2.3" }
}]
}
}
The configuration provided above splits the address range into four pools: two
pools dedicated to "HA_server1" and two to "HA_server2". Each server can assign
leases to both phones and laptops. Both groups of devices are assigned addresses
from different pools. The "HA_server1" and "HA_server2" classes are built-in
(see Built-in Client Classes) and do not need to be declared.
They are assigned dynamically by the HA hook library as a result of the
load-balancing
algorithm. "phones_*" and "laptop_*" evaluate to true
when the query belongs to a given combination of other classes, e.g. "HA_server1"
and "phones". The pool is selected accordingly as a result of such an evaluation.
Consult Client Classification for details on how to use the member
expression and
class dependencies.
16.12.8. Hot-Standby Configuration
The following is an example configuration of the primary server in a
hot-standby
configuration:
"Dhcp4": {
"hooks-libraries": [{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
}, {
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [{
"this-server-name": "server1",
"mode": "hot-standby",
"heartbeat-delay": 10000,
"max-response-delay": 60000,
"max-ack-delay": 5000,
"max-unacked-clients": 5,
"max-rejected-lease-updates": 10,
"peers": [{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary",
"auto-failover": true
}, {
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "standby",
"auto-failover": true
}, {
"name": "server3",
"url": "http://192.168.56.99:8000/",
"basic-auth-user": "foo",
"basic-auth-password": "bar",
"role": "backup",
"auto-failover": false
}]
}]
}
}],
"subnet4": [{
"id": 1,
"subnet": "192.0.3.0/24",
"pools": [{
"pool": "192.0.3.100 - 192.0.3.250",
"client-class": "HA_server1"
}],
"option-data": [{
"name": "routers",
"data": "192.0.3.1"
}],
"relay": { "ip-address": "10.1.2.3" }
}]
}
This configuration is very similar to the load-balancing
configuration
described in Load-Balancing Configuration, with a few notable differences.
The mode
is now set to hot-standby
, in which only one server responds to
DHCP clients. If the primary server is online, it responds to all DHCP queries.
The standby
server takes over all DHCP traffic only if it discovers that the
primary is unavailable.
In this mode, the non-primary active server is called standby
and that is
its role.
Finally, because there is always only one server responding to DHCP queries,
there is only one scope - "HA_server1" - in use within pool definitions. In fact,
the client-class
parameter could be removed from this configuration without
harm, because there can be no conflicts in lease allocations by different
servers as they do not allocate leases concurrently. The client-class
remains in this example mostly for demonstration purposes, to highlight the
differences between the hot-standby
and load-balancing
modes of
operation.
16.12.9. Passive-Backup Configuration
The following is an example configuration file for the primary server in a
passive-backup
configuration:
{
"Dhcp4": {
"hooks-libraries": [{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
}, {
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [{
"this-server-name": "server1",
"mode": "passive-backup",
"wait-backup-ack": false,
"peers": [{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary"
}, {
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "backup"
}, {
"name": "server3",
"url": "http://192.168.56.99:8000/",
"basic-auth-user": "foo",
"basic-auth-password": "bar",
"role": "backup"
}]
}]
}
}],
"subnet4": [{
"id": 1,
"subnet": "192.0.3.0/24",
"pools": [{
"pool": "192.0.3.100 - 192.0.3.250"
}],
"option-data": [{
"name": "routers",
"data": "192.0.3.1"
}],
"relay": { "ip-address": "10.1.2.3" }
}]
}
}
The configurations of three peers are included: one for the primary and two for the backup servers.
Many of the parameters present in the load-balancing
and hot-standby
configuration examples are not relevant in the passive-backup
mode, thus
they are not specified here. For example: heartbeat-delay
,
max-unacked-clients
, max-rejected-lease-updates
, and others related to
the failover mechanism should not be specified in the passive-backup
mode.
The wait-backup-ack
is a boolean parameter not present in previous examples.
It defaults to false
and must not be modified in the load-balancing
and
hot-standby
modes. In the passive-backup
mode this parameter can be set
to true
, which causes the primary server to expect acknowledgments to the
lease updates from the backup servers prior to responding to the DHCP client. It
ensures that the lease has propagated to all servers before the client is given
the lease, but it poses a risk of losing a DHCP service if there is a
communication problem with one of the backup servers. This setting also
increases the latency of the DHCP response, because of the time that the primary
spends waiting for the acknowledgements. We recommend that the
wait-backup-ack
setting be left at its default value (false
) if the DHCP
service reliability is more important than consistency of the lease information
between the primary and the backups, and in all cases when the DHCP service
latency should be minimal.
Note
Currently, active servers place lease updates to be sent to peers onto
internal queues (one queue per peer/URL). In passive-backup
mode, active
servers do not wait for lease updates to be acknowledged; thus during times
of heavy client traffic it is possible for the number of lease updates queued
for transmission to accumulate faster than they can be delivered. As client
traffic lessens the queues begin to empty. Since Kea 2.0.0, active servers
monitor the size of these queues and emit periodic warnings (see
HTTP_CLIENT_QUEUE_SIZE_GROWING in Kea Messages Manual) if they perceive a
queue as growing too quickly. The warnings cease once the queue size begins
to shrink. These messages are intended as a bellwether and seeing them
sporadically during times of heavy traffic load does not necessarily indicate
a problem. If, however, they occur continually during times of routine
traffic load, they likely indicate potential mismatches in server
capabilities and/or configuration; this should be investigated, as the size
of the queues may eventually impair an active server's ability to respond to
clients in a timely manner.
16.12.10. Lease Information Sharing
An HA-enabled server informs its active partner about allocated or renewed leases by sending appropriate control commands, and the partner updates the lease information in its own database. When the server starts up for the first time or recovers after a failure, it synchronizes its lease database with its partner. These two mechanisms guarantee consistency of the lease information between the servers and allow the designation of one of the servers to handle the entire DHCP traffic load if the other server becomes unavailable.
In some cases, though, it is desirable to disable lease updates and/or database synchronization between the active servers, if the exchange of information about the allocated leases is performed using some other mechanism. Kea supports various database types that can be used to store leases, including MySQL and PostgreSQL. Those databases include built-in solutions for data replication which are often used by Kea administrators to provide redundancy.
The HA hook library supports such scenarios by disabling lease updates over the
control channel and/or lease-database synchronization, leaving the server to
rely on the database replication mechanism. This is controlled by the two
boolean parameters send-lease-updates
and sync-leases
, whose values
default to true
:
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [ {
"this-server-name": "server1",
"mode": "load-balancing",
"send-lease-updates": false,
"sync-leases": false,
"peers": [
{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary"
},
{
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "secondary"
}
]
} ]
}
}
],
...
}
In the most typical use case, both parameters are set to the same value, i.e.
both are false
if database replication is in use, or both are true
otherwise. Introducing two separate parameters to control lease updates and
lease-database synchronization is aimed at possible special use cases; for
example, when synchronization is performed by copying a lease file (therefore
sync-leases
is set to false
), but lease updates should be conducted as
usual (send-lease-updates
is set to true
). It should be noted that Kea
does not natively support such use cases, but users may develop their own
scripts and tools around Kea to provide such mechanisms. The HA hook library
configuration is designed to maximize flexibility of administration.
16.12.11. Controlling Lease-Page Size Limit
An HA-enabled server initiates synchronization of the lease database after
downtime or upon receiving the ha-sync
command. The server uses the commands
lease4-get-page
and lease6-get-page
to fetch leases from its partner server (lease queries). The size of the results
page (the maximum number of leases to be returned in a single response to one of
these commands) can be controlled via configuration of the HA hook library.
Increasing the page size decreases the number of lease queries sent to the
partner server, but it causes the partner server to generate larger responses,
which lengthens transmission time as well as increases memory and CPU
utilization on both servers. Decreasing the page size helps to decrease resource
utilization, but requires more lease queries to be issued to fetch the entire
lease database.
The default value of the sync-page-limit
command controlling the page size
is 10000. This means that the entire lease database can be fetched with a single
command if the size of the database is equal to or less than 10000 lines.
16.12.12. Timeouts
In deployments with a large number of clients connected to the network,
lease-database synchronization after a server failure may be a time-consuming
operation. The synchronizing server must gather all leases from its partner,
which yields a large response over the RESTful interface. The server receives
leases using the paging mechanism described in Controlling Lease-Page Size Limit.
Before the page of leases is fetched, the synchronizing server sends a
dhcp-disable
command to disable the DHCP service on the partner server. If
the service is already disabled, this command resets the timeout for the DHCP
service being disabled, which by default is set to 60 seconds. If fetching a
single page of leases takes longer than the specified time, the partner server
assumes that the synchronizing server has died and resumes its DHCP service. The
connection of the synchronizing server with its partner is also protected by the
timeout. If the synchronization of a single page of leases takes longer than the
specified time, the synchronizing server terminates the connection and the
synchronization fails. Both timeout values are controlled by a single
configuration parameter, sync-timeout
. The following configuration snippet
demonstrates how to modify the timeout for automatic re-enabling of the DHCP
service on the partner server and how to increase the timeout for fetching a
single page of leases from 60 seconds to 90 seconds:
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [ {
"this-server-name": "server1",
"mode": "load-balancing",
"sync-timeout": 90000,
"peers": [
{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary"
},
{
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "secondary"
}
]
} ]
}
}
],
...
}
It is important to note that extending this sync-timeout
value may sometimes
be insufficient to prevent issues with timeouts during lease-database
synchronization. The control commands travel via the Control Agent, which also
monitors incoming (with a synchronizing server) and outgoing (with a DHCP server)
connections for timeouts. The DHCP server also monitors the connection from the
Control Agent for timeouts. Those timeouts cannot currently be modified via
configuration; extending these timeouts is only possible by modifying them in
the Kea code and recompiling the server. The relevant constants are located in
the Kea source at: src/lib/config/timeouts.h
.
16.12.13. Pausing the HA State Machine
The high-availability
state machine includes many different states described
in detail in Server States. The server enters each state when certain
conditions are met, most often taking into account the partner server's state.
In some states the server performs specific actions, e.g. synchronization of the
lease database in the syncing
state, or responding to DHCP queries according
to the configured mode of operation in the load-balancing
and hot-standby
states.
By default, transitions between the states are performed automatically and the server administrator has no direct control over when the transitions take place; in most cases, the administrator does not need such control. In some situations, however, the administrator may want to "pause" the HA state machine in a selected state to perform some additional administrative actions before the server transitions to the next state.
Consider a server failure which results in the loss of the entire lease database.
Typically, the server rebuilds its lease database when it enters the syncing
state by querying the partner server for leases, but it is possible that the
partner was also experiencing a failure and lacks lease information. In this
case, it may be required to reconstruct lease databases on both servers from
some external source, e.g. a backup server. If the lease database is to be
reconstructed via the RESTful API, the servers should be started in the initial,
i.e. waiting
, state and remain in this state while leases are being added.
In particular, the servers should not attempt to synchronize their lease
databases nor start serving DHCP clients.
The HA hook library provides configuration parameters and a command to control
pausing and resuming the HA state machine. The following configuration causes
the HA state machine to pause in the waiting
state after server startup.
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [ {
"this-server-name": "server1",
"mode": "load-balancing",
"peers": [
{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary"
},
{
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "secondary"
}
],
"state-machine": {
"states": [
{
"state": "waiting",
"pause": "once"
}
]
}
} ]
}
}
],
...
}
The pause
parameter value once
denotes that the state machine should be
paused upon the first transition to the waiting
state; later transitions to
this state will not cause the state machine to pause. Two other supported values
of the pause
parameter are always
and never
. The latter is the
default value for each state, which instructs the server never to pause the
state machine.
In order to "unpause" the state machine, the ha-continue
command must be
sent to the paused server. This command does not take any arguments. See
Control Commands for High Availability for details about commands specific to libdhcp_ha.so
.
It is possible to configure the state machine to pause in more than one state. Consider the following configuration:
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [ {
"this-server-name": "server1",
"mode": "load-balancing",
"peers": [
{
"name": "server1",
"url": "http://192.168.56.33:8000/",
"role": "primary"
},
{
"name": "server2",
"url": "http://192.168.56.66:8000/",
"role": "secondary"
}
],
"state-machine": {
"states": [
{
"state": "ready",
"pause": "always"
},
{
"state": "partner-down",
"pause": "once"
}
]
}
} ]
}
}
],
...
}
This configuration instructs the server to pause the state machine every time it
transitions to the ready
state and upon the first transition to the
partner-down
state.
Refer to Server States for a complete list of server states. The state
machine can be paused in any of the supported states; however, it is not
practical to pause in the backup
or terminated
states because the server
never transitions out of these states anyway.
Note
In the syncing
state the server is paused before it makes an attempt to
synchronize the lease database with a partner. To pause the state machine
after lease-database synchronization, use the ready
state instead.
Note
The state of the HA state machine depends on the state of the cooperating
server. Therefore, pausing the state machine of one server may affect the
operation of the partner server. For example: if the primary server is paused
in the waiting
state, the partner server will also remain in the
waiting
state until the state machine of the primary server is resumed
and that server transitions to the ready
state.
16.12.14. Control Agent Configuration
The The Kea Control Agent describes in detail the Kea daemon, which provides a RESTful interface to control the Kea servers. The same functionality is used by the High Availability hook library to establish communication between the HA peers. Therefore, the HA library requires that the Control Agent (CA) be started for each DHCP instance within the HA setup. If the Control Agent is not started, the peers cannot communicate with a particular DHCP server (even if the DHCP server itself is online) and may eventually consider this server to be offline.
The following is an example configuration for the CA running on the same
machine as the primary server. This configuration is valid for both the
load-balancing
and the hot-standby
cases presented in previous sections.
{
"Control-agent": {
"http-host": "192.168.56.33",
// If enabling HA and multi-threading, the 8000 port is used by the HA
// hook library http listener. When using HA hook library with
// multi-threading to function, make sure the port used by dedicated
// listener is different (e.g. 8001) than the one used by CA. Note
// the commands should still be sent via CA. The dedicated listener
// is specifically for HA updates only.
"http-port": 8000,
"control-sockets": {
"dhcp4": {
"socket-type": "unix",
"socket-name": "/tmp/kea-dhcp4-ctrl.sock"
},
"dhcp6": {
"socket-type": "unix",
"socket-name": "/tmp/kea-dhcp6-ctrl.sock"
}
}
}
}
Since Kea 1.9.0, basic HTTP authentication is supported.
16.12.15. Multi-Threaded Configuration (HA+MT)
It is possible to configure HA to use direct multi-threaded communication between peers. We refer to this mode as HA+MT. With HA+MT enabled, each peer runs its own dedicated, internal HTTP listener (i.e. server) which receives and responds to commands directly, thus eliminating the need for an agent to carry out the HA protocol between peers. In addition, both the listener and client components use multi-threading to support multiple concurrent connections between peers. By eliminating the agent and executing multiple command exchanges in parallel, HA throughput between peers improves considerably over earlier versions of Kea in most situations.
The following parameters have been added to the HA configuration, to support HA+MT operation:
enable-multi-threading
- enables or disables multi-threading HA peer communication (HA+MT). Kea core multi-threading must be enabled for HA+MT to operate. Whenfalse
, the server relies onkea-ctrl-agent
for communication with its peer, and uses single-threaded HTTP client processing. The default istrue
.http-dedicated-listener
- enables or disables the creation of a dedicated, internal HTTP listener through which the server receives HA messages from its peers. The internal listener replaces the role ofkea-ctrl-agent
traffic, allowing peers to send their HA commands directly to each other. The listener listens on the peer'surl
. Whenfalse
, the server relies onkea-ctrl-agent
. This parameter has been provided largely for flexibility and testing; running HA+MT without dedicated listeners enabled will substantially limit HA throughput. The default istrue
.http-listener-threads
- indicates the maximum number of threads the dedicated listener should use. A value of0
instructs the server to use the same number of threads that the Kea core is using for DHCP multi-threading. The default is0
.http-client-threads
- indicates the maximum number of threads that should be used to send HA messages to its peers. A value of0
instructs the server to use the same number of threads that the Kea core is using for DHCP multi-threading. The default is0
.
These parameters are grouped together under a map element, multi-threading
,
as illustrated below:
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": { }
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [ {
"this-server-name": "server1",
"multi-threading": {
"enable-multi-threading": true,
"http-dedicated-listener": true,
"http-listener-threads": 4,
"http-client-threads": 4
},
"peers": [
// This is the configuration of this server instance.
{
"name": "server1",
// This specifies the URL of our server instance.
// Since the HA+MT uses a direct connection, the
// DHCPv4 server open its own socket. Note that it
// must be different than the one used by the CA
// (typically 8000). In this example, 8001 is used.
"url": "http://192.0.2.1:8001/",
// This server is primary. The other one must be
// secondary.
"role": "primary"
},
// This is the configuration of our HA peer.
{
"name": "server2",
// This specifies the URL of our server instance.
// Since the HA+MT uses a direct connection, the
// DHCPv4 server open its own socket. Note that it
// must be different than the one used by the CA
// (typically 8000). In this example, 8001 is used.
"url": "http://192.0.2.2:8001/",
// The partner is a secondary. This server is a
// primary as specified in the previous "peers"
// entry and in "this-server-name" before that.
"role": "secondary"
},
...
],
...
},
...
]
}
},
...
],
...
}
In the example above, HA+MT is enabled with four threads for the listener and four threads for the client.
Note
It is essential to configure the ports correctly. One common mistake is to configure CA to listen on port 8000 and also configure dedicated listeners on port 8000. In such a configuration, the communication will still work over CA, but it will be slow and the DHCP server will fail to bind sockets. Administrators should ensure that dedicated listeners use a different port (8001 is a suggested alternative); if ports are misconfigured or the ports dedicated to CA are used, the performance bottlenecks caused by the single-threaded nature of CA and the sequential nature of the UNIX socket that connects CA to DHCP servers will nullify any performance gains offered by HA+MT.
16.12.16. Parked-Packet Limit
Refer to Parked-Packet Limit for a basic introduction to packet parking.
The HA hook library uses this mechanism. When an HA server needs to send a lease update to its peers to notify them of the change to the lease, it parks the client response until the peers acknowledge the lease update. At that point, the server unparks the response and sends it to the client. This applies to client queries that cause lease changes, such as DHCPREQUEST for DHCPv4 and Request, Renew, and Rebind for DHCPv6. It does not apply to DHCPDISCOVERs (v4) or Solicits (v6).
16.12.17. Controlled Shutdown and Maintenance of DHCP Servers
Having a pair of servers providing High Availability allows for controlled shutdown and maintenance of those servers without disrupting the DHCP service. For example, an administrator can perform an upgrade of one of the servers while the other one continues to respond to DHCP queries. When the first server is upgraded and back online, the upgrade can be performed for the second server.
A typical problem reported with early versions of the High Availability hook library was that the administrator did not have direct control over the state of the DHCP server. Shutting down one of the servers for maintenance did not necessarily cause the other server to start responding to all DHCP queries, because the failure-detection algorithm described in Scope Transition in a Partner-Down Case requires that the partner not respond for a configured period of time and, depending on the configuration, may also require that a number of DHCP requests not be responded to for a specified period of time. The maintenance procedure, however, requires that the administrator be able to instruct one of the servers to instantly start serving all DHCP clients, and the other server to instantly stop serving any DHCP clients, so it can be safely shut down.
The maintenance feature of the High Availability hook library addresses this
situation. The ha-maintenance-start
command allows the
administrator to put the pairs of the active servers into a state in which one of
them is responding to all DHCP queries and the other one is awaiting shutdown.
Suppose that the HA setup includes two active servers, server1
and
server2
, and the latter needs to be shut down for maintenance.
The administrator can send the ha-maintenance-start
command to server1
,
as this is the server which is going to handle the DHCP traffic while the other
one is offline. server1
responds with an error if its state or the partner's
state does not allow for a maintenance shutdown: for example, if maintenance is
not supported for the backup server or if the server is in the terminated
state. Also, an error is returned if the ha-maintenance-start
request was
already sent to the other server.
Upon receiving the ha-maintenance-start
command, server1
sends the
ha-maintenance-notify
command to server2
to put it in the
in-maintenance
state. If server2
confirms, server1
transitions to
the partner-in-maintenance
state. This is similar to the partner-down
state, except that in the partner-in-maintenance
state server1
continues
to send lease updates to server2
until the administrator shuts down
server2
. server1
now responds to all DHCP queries.
The administrator can now safely shut down server2
in the in-maintenance
state and perform any necessary maintenance actions. While server2
is
offline, server1
will obviously not be able to communicate with its partner,
so it will immediately transition to the partner-down
state; it will
continue to respond to all DHCP queries but will no longer send lease updates to
server2
. Restarting server2
after the maintenance will trigger normal
state negotiation, lease-database synchronization, and, ultimately, a transition
to the normal load-balancing
or hot-standby
state. Maintenance can then
be performed on server1
, after sending the ha-maintenance-start
command
to server2
.
If the ha-maintenance-start
command was sent to the server and the server
has transitioned to the partner-in-maintenance
state, it is possible to
transition both it and its partner back to their previous states to resume the
normal operation of the HA pair. This is achieved by sending the
ha-maintenance-cancel
command to the server that is in the
partner-in-maintenance
state. However, if the server has already
transitioned to the partner-down
state as a result of detecting that the
partner is offline, canceling the maintenance is no longer possible. In that
case, it is necessary to restart the other server and allow it to complete its
normal state negotiation process.
If the server has many relationships with different partners, the ha-maintenance-start
command attempts to transition all of the relationships into the
partner-in-maintenance
state by sending ha-maintenance-notify
to all
partner servers. If this step fails for any server, an error is returned.
If that happens, the ha-maintenance-cancel
command can be used to resume normal
operations and fix the issue.
16.12.18. Control Commands for High Availability
Even though the HA hook library is designed to automatically resolve issues with DHCP service interruptions by redirecting the DHCP traffic to a surviving server and synchronizing the lease database as needed, it may be useful for the administrator to have more control over both servers' behavior. In particular, it may be useful to be able to trigger lease-database synchronization on demand, or to manually set the HA scopes that are being served.
The backup server can sometimes be used to handle DHCP traffic if both active servers are down. The backup server does not perform the failover function automatically; thus, in order to use the backup server to respond to DHCP queries, the server administrator must enable this function manually.
The following sections describe commands supported by the HA hook library which are available for the administrator.
16.12.18.1. The ha-sync
Command
The ha-sync
command instructs the server to synchronize its local lease
database with the selected peer. The server fetches all leases from the peer and
updates any locally stored leases which are older than those fetched. It also
creates new leases when any of those fetched do not exist in the local database.
All leases that are not returned by the peer but are in the local database are
preserved. The database synchronization is unidirectional; only the database on
the server to which the command has been sent is updated. To synchronize the
peer's database, a separate ha-sync
command must be issued to that peer.
Database synchronization may be triggered for both active and backup server
types. The ha-sync
command has the following structure (in a DHCPv4 example):
{
"command": "ha-sync",
"service": [ "dhcp4 "],
"arguments": {
"server-name": "server2",
"max-period": 60
}
}
When the server receives this command it first disables the DHCP service of the
server from which it will be fetching leases, by sending the dhcp-disable
command to that server. The max-period
parameter specifies the maximum
duration (in seconds) for which the DHCP service should be disabled. If the DHCP
service is successfully disabled, the synchronizing server fetches leases from
the remote server by issuing one or more lease4-get-page
commands. When the
lease-database synchronization is complete, the synchronizing server sends the
dhcp-enable
command to the peer to re-enable its DHCP service.
The max-period
value should be sufficiently long to guarantee that it does
not elapse before the synchronization is completed. Otherwise, the DHCP server
will automatically enable its DHCP function while the synchronization is still
in progress. If the DHCP server subsequently allocates any leases during the
synchronization, those new (or updated) leases will not be fetched by the
synchronizing server, leading to database inconsistencies.
16.12.18.2. The ha-scopes
Command
This command allows an administrator to modify the HA scopes being served. It can be useful when recovering from a failure or when performing maintenance. Consult Load-Balancing Configuration and Hot-Standby Configuration to learn which scopes are available for the different HA modes of operation.
Warning
The ha-scopes
command can put Kea servers into conflicting states,
which can lead to unexpected behavior. Changing scopes does not automatically
change the state of the server or its relationship with a partner.
For example, when we add primary scopes to the standby server it will start responding to DHCP traffic for those scopes. This can lead to a situation where both servers are responding to the same traffic, which can lead to IP address collisions.
The ha-scopes
command has the following structure;
using an example in DHCPv4.:
{
"command": "ha-scopes",
"service": [ "dhcp4" ],
"arguments": {
"scopes": [ "HA_server1", "HA_server2" ],
"server-name": "server2"
}
}
This command configures the server to handle traffic from both the "HA_server1" and "HA_server2" scopes. To disable all scopes specify an empty list:
{
"command": "ha-scopes",
"service": [ "dhcp4 "],
"arguments": {
"scopes": [ ],
"server-name": "server2"
}
}
The optional server-name
parameter specifies the name of one of the partners in
the HA relationship that this command pertains to. This parameter can be omitted if the
server receiving this command has only one HA relationship in its configuration.
16.12.18.3. The ha-continue
Command
This command is used to resume the operation of the paused HA state machine, as described in Pausing the HA State Machine. It takes no arguments, so the command structure is simply:
{
"command": "ha-continue",
"service": [ "dhcp4" ],
"arguments": {
"scopes": [ ],
"server-name": "server2"
}
}
The optional server-name
parameter specifies the name of one of the partners in
the HA relationship that this command pertains to. This parameter can be omitted if the
server receiving this command has only one HA relationship in its configuration.
16.12.18.4. The ha-heartbeat
Command
The Server States section describes how the ha-heartbeat
command
is used by a pair of active HA servers to detect one partner's failure. This
command, however, can also be sent by the system administrator to one or both
servers to check their HA state. This allows a monitoring system to be deployed
on the HA enabled servers to periodically check whether they are operational or
whether any manual intervention is required. The ha-heartbeat
command takes
no arguments:
{
"command": "ha-heartbeat",
"service": [ "dhcp4" ],
"arguments": {
"scopes": [ ],
"server-name": "server2"
}
}
The optional server-name
parameter specifies the name of one of the partners in
the HA relationship that this command pertains to. This parameter can be omitted if the
server receiving this command has only one HA relationship in its configuration.
Upon successful communication with the server, a response similar to this should be returned:
{
"result": 0,
"text": "HA peer status returned.",
"arguments":
{
"state": "partner-down",
"date-time": "Thu, 07 Nov 2019 08:49:37 GMT",
"scopes": [ "server1" ],
"unsent-update-count": 123
}
}
The returned state
value should be one of the values listed in
Server States. In the example above, the partner-down
state is
returned, which indicates that the server which responded to the command
believes that its partner is offline; thus, it is serving all DHCP requests sent
to the servers. To ensure that the partner is indeed offline, the administrator
should send the ha-heartbeat
command to the second server. If sending the
command fails, e.g. due to an inability to establish a TCP connection to the
Control Agent, or if the Control Agent reports issues with communication with
the DHCP server, it is very likely that the server is not running.
The date-time
parameter conveys the server's notion of time.
The unsent-update-count
value is a cumulative count of all unsent lease
updates since the server was booted; its value is set to 0 when the server is
started. It is never reset to 0 during the server's operation, even after the
partner synchronizes the database. It is incremented by the partner sending the
heartbeat response when it cannot send the lease update. For example, suppose
the failure is a result of a temporary communication interruption. In that case,
the partner receiving the partner-down
heartbeat response tracks the value
changes and can determine, once communication is reestablished, whether there
are any new lease updates that it did not receive. If the values on both servers
do not match, it is an indication that the partner should synchronize its lease
database. A non-zero value itself is not an indication of any present issues
with lease updates, but a constantly incrementing value is.
The typical response returned by one server when both are operational is:
{
"result": 0,
"text": "HA peer status returned.",
"arguments":
{
"state": "load-balancing",
"date-time": "Thu, 07 Nov 2019 08:49:37 GMT",
"scopes": [ "server1" ],
"unsent-update-count": 0
}
}
In most cases, the ha-heartbeat
command should be sent to both HA-enabled
servers to verify the state of the entire HA setup. In particular, if one of the
servers indicates that it is in the load-balancing
state, it means that this
server is operating as if its partner is functional. When a partner goes down,
it takes some time for the surviving server to realize it. The
Scope Transition in a Partner-Down Case section describes the algorithm which the surviving
server follows before it transitions to the partner-down
state. If the
ha-heartbeat
command is sent during the time window between the failure of
one of the servers and the transition of the surviving server to the
partner-down
state, the response from the surviving server does not reflect
the failure. Resending the command detects the failure once the surviving server
has entered the partner-down
state.
16.12.18.5. The status-get
Command
status-get
is a general-purpose command supported by several Kea daemons,
not only the DHCP servers. However, when sent to a DHCP server with HA enabled,
it can be used to get insight into the details of the HA-specific server status.
Not only does the response contain the status information of the server
receiving this command, but also the information about its partner if it is
available.
The following is an example response to the status-get
command, including
the HA status of two load-balancing
servers:
{
"result": 0,
"text": "",
"arguments": {
"pid": 1234,
"uptime": 3024,
"reload": 1111,
"high-availability": [
{
"ha-mode": "load-balancing",
"ha-servers": {
"local": {
"role": "primary",
"scopes": [ "server1" ],
"server-name": "server1",
"state": "load-balancing",
"system-time": "2024-01-01 12:00:00"
},
"remote": {
"age": 10,
"analyzed-packets": 8,
"clock-skew": 0,
"communication-interrupted": true,
"connecting-clients": 2,
"in-touch": true,
"last-scopes": [ "server2" ],
"last-state": "load-balancing",
"role": "secondary",
"server-name": "server2",
"system-time": "2024-01-01 12:00:00",
"unacked-clients": 1,
"unacked-clients-left": 2
}
}
}
],
"multi-threading-enabled": true,
"thread-pool-size": 4,
"packet-queue-size": 64,
"packet-queue-statistics": [ 0.2, 0.1, 0.1 ],
"sockets": {
"status": "ready"
}
}
}
The high-availability
argument is a list which currently comprises only one
element.
The ha-servers
map contains two structures: local
and remote
. The
former contains the status information of the server which received the command,
while the latter contains the status information known to the local server about
the partner. The role
of the partner server is gathered from the local
configuration file, and thus should always be available. The remaining status
information, such as last-scopes
and last-state
, is not available until
the local server communicates with the remote by successfully sending the
ha-heartbeat
command. If at least one such communication has taken place,
the returned value of the in-touch
parameter is set to true
. By
examining this value, the command's sender can determine whether the information
about the remote server is reliable.
The last-scopes
and last-state
parameters contain information about the
HA scopes served by the partner and its state. This information is gathered
during the ha-heartbeat
command exchange, so it may not be accurate if a
communication problem occurs between the partners and this status information is
not refreshed. In such a case, it may be useful to send the status-get
command to the partner server directly to check its current state. The age
parameter specifies the age of the information from the partner, in seconds.
The communication-interrupted
boolean value indicates whether the server
receiving the status-get
command (the local server) has been unable to
communicate with the partner longer than the duration specified as
max-response-delay
. In such a situation, the active servers are considered
to be in the communication-interrupted
state. At this point, the local
server may start monitoring the DHCP traffic directed to the partner to see if
the partner is responding to this traffic. More about the failover procedure can
be found in Load-Balancing Configuration.
The system-time
parameter holds the UTC time when skew between local and
partner node was last calculated. It is displayed in %Y-%m-%d %H:%M:%S
format
for each active node: local, and remote, respectively. The clock-skew
parameter is available in the remote
map and holds the difference in seconds
between the two times. Local time is subtracted from the partner's time.
A positive value means that the partner is ahead, while a negative value means
that the partner is behind. Both system-time
and clock-skew
parameters
can be null if the clock skew was not calculated yet.
The connecting-clients
, unacked-clients
, unacked-clients-left
, and
analyzed-packets
parameters were introduced along with the
communication-interrupted
parameter and they convey useful information about
the state of the DHCP traffic monitoring in the communication-interrupted
state. Once the server leaves the communication-interrupted
state, these
parameters are all reset to 0.
These parameters have the following meaning in the communication-interrupted
state:
connecting-clients
- this is the number of different clients which have attempted to get a lease from the remote server. These clients are differentiated by their MAC address and client identifier (in DHCPv4) or DUID (in DHCPv6). This number includes "unacked" clients (for which the "secs" field or "elapsed time" value exceeded themax-response-delay
).unacked-clients
- this is the number of different clients which have been considered "unacked", i.e. the clients which have been trying to get the lease longer than the value of the "secs" field, or for which the "elapsed time" exceeded themax-response-delay
setting.unacked-clients-left
- this indicates the number of additional clients which have to be considered "unacked" before the server enters thepartner-down
state. This value decreases when theunacked-clients
value increases. The local server enters thepartner-down
state when this value decreases to 0.analyzed-packets
- this is the total number of packets directed to the partner server and analyzed by the local server since entering the communication interrupted state. It includes retransmissions from the same clients.
Monitoring these values helps to predict when the local server will enter the
partner-down
state or to understand why the server has not yet entered this
state.
The ha-mode
parameter returns the HA mode of operation selected using the
mode
parameter in the configuration file. It can hold one of the following
values: load-balancing
, hot-standby
, or passive-backup
.
The status-get
response has the format described above only in the
load-balancing
and hot-standby
modes. In the passive-backup
mode the
remote
map is not included in the response because in this mode there is
only one active server (local). The response includes no information about the
status of the backup servers.
16.12.18.6. The ha-maintenance-start
Command
This command initiates the transition of the server's partners into the
in-maintenance
state, and the transition of the server receiving the command
into the partner-in-maintenance
state, in each HA relationship. See the
Controlled Shutdown and Maintenance of DHCP Servers section for details.
{
"command": "ha-maintenance-start",
"service": [ "dhcp4" ]
}
16.12.18.7. The ha-maintenance-cancel
Command
This command is used to cancel the maintenance previously initiated using the
ha-maintenance-start
command. The server receiving this command first
sends ha-maintenance-notify
, with the cancel
flag set to true
, to its
partners. Next, the server reverts from the partner-in-maintenance
state to
its previous state. See the Controlled Shutdown and Maintenance of DHCP Servers section for details.
{
"command": "ha-maintenance-cancel",
"service": [ "dhcp4" ]
}
16.12.18.8. The ha-maintenance-notify
Command
This command is sent by the server receiving the ha-maintenance-start
or the
ha-maintenance-cancel
command to its partner, to cause the partner to
transition to the in-maintenance
state or to revert from this state to a
previous state. See the Controlled Shutdown and Maintenance of DHCP Servers section for details.
{
"command": "ha-maintenance-notify",
"service": [ "dhcp4" ],
"arguments": {
"cancel": false,
"server-name": "server2"
}
}
The optional server-name
parameter specifies the name of one of the partners in
the HA relationship that this command pertains to. This parameter can be omitted if the
server receiving this command has only one HA relationship in its configuration.
Warning
The ha-maintenance-notify
command is not meant to be used by system
administrators. It is used for internal communication between a pair of
HA-enabled DHCP servers. Direct use of this command is not supported and may
produce unintended consequences.
16.12.18.9. The ha-reset
Command
This command causes the server to reset its High Availability state machine by
transitioning it to the waiting
state. A partner in the
communication-recovery
state may send this command to cause the server
to synchronize its lease database. Database synchronization is required when the
partner has failed to send all lease database updates after re-establishing
connection after a temporary connection failure. It is also required when the
delayed-updates-limit
is exceeded, when the server is in the
communication-recovery
state.
A server administrator may send this command to reset a misbehaving state machine.
{
"command": "ha-reset",
"service": [ "dhcp4" ],
"arguments": {
"server-name": "server2"
}
}
The optional server-name
parameter specifies the name of one of the partners in
the HA relationship that this command pertains to. This parameter can be omitted if the
server receiving this command has only one HA relationship in its configuration.
It elicits the response:
{
"result": 0,
"text": "HA state machine reset."
}
If the server receiving this command is already in the waiting
state, the
command has no effect.
16.12.18.10. The ha-sync-complete-notify
Command
A server sends this command to its partner to signal that it has completed
lease-database synchronization. The partner may enable its DHCP service if it
can allocate new leases in its current state. The partner does not enable the
DHCP service in the partner-down
state until it sends a successful ha-heartbeat
test to its partner server. If the connection is still unavailable, the server
in the partner-down
state enables its own DHCP service to continue
responding to clients.
{
"command": "ha-sync-complete-notify",
"service": [ "dhcp4" ],
"arguments": {
"origin-id": 2000,
"server-name": "server2"
}
}
The optional server-name
parameter specifies the name of one of the partners in
the HA relationship that this command pertains to. This parameter can be omitted if the
server receiving this command has only one HA relationship in its configuration.
The origin-id
parameter is used to select the HA service for which the receiving server should
enable the DHCP service when it receives this notification. This is the same origin the
sending server used previously to disable the DHCP service before synchronization.
The origin-id
parameter deprecates the origin
parameter used in some earlier
Kea versions.
It elicits the response:
{
"result": 0,
"text": "Server successfully notified about the synchronization completion."
}
Warning
The ha-sync-complete-notify
command is not meant to be used by system
administrators. It is used for internal communication between a pair of
HA-enabled DHCP servers. Direct use of this command is not supported and may
produce unintended consequences.
16.12.19. Hub and Spoke Configuration
A hub-and-spoke arrangement, with one central server and multiple branch servers,
is a common way to ensure resiliency of the DHCP servers. The branch servers are the primary servers
in the hot-standby
mode and respond to the local DHCP traffic in their respective
locations. The central server acts as a standby server for each branch server.
It maintains independent state machines with the branch servers, called relationships.
If one of the branch servers experiences a failure, the central server can take over its
DHCP traffic. In this case, one of the central server's relationships is in
the partner-down
state. The remaining relationships may still be in the hot-standby
state and not actively respond to DHCP traffic. When the branch server becomes active again,
it synchronizes the lease database with the central server and the central server becomes
fully passive again. In rare cases, if multiple branch servers stop, the central server
takes responsibility for all their traffic, and potentially all DHCP traffic in the entire network
if every branch server is down. A simple hub-and-spoke arrangement consisting of two
branch servers and one central server is shown below.
+----- Central Server ------+
| |
+----------+ relationship 1 | +----------+----------+ | relationship 2 +----------+
| Server 1 |===================| Server 2 | Server 4 |===================| Server 3 |
+----------+ | +----------+----------+ | +----------+
| |
+---------------------------+
Each branch server's configuration comprises a set of subnets appropriate for the branch server; different branch servers serve different subnets. The central server's configuration includes all subnets of the branch servers, so that it can respond to DHCP traffic directed to any branch servers that fail. The subnets in the central server must be grouped into relationships as in the snippet below:
{
"Dhcp6": {
"interfaces-config": {
"interfaces": [ "enp0s8", "enp0s9" ]
},
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": {}
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [
{
"this-server-name": "server2",
"mode": "hot-standby",
"multi-threading": {
"enable-multi-threading": true,
"http-dedicated-listener": true,
"http-listener-threads": 4,
"http-client-threads": 4
},
"peers": [
{
"name": "server1",
"url": "http://192.168.56.66:8000/",
"role": "primary",
"auto-failover": true
},
{
"name": "server2",
"url": "http://192.168.56.33:8000/",
"role": "standby",
"auto-failover": true
}
]
},
{
"this-server-name": "server4",
"mode": "hot-standby",
"multi-threading": {
"enable-multi-threading": true,
"http-dedicated-listener": true,
"http-listener-threads": 4,
"http-client-threads": 4
},
"peers": [
{
"name": "server3",
"url": "http://192.168.57.99:8000/",
"role": "primary",
"auto-failover": true
},
{
"name": "server4",
"url": "http://192.168.57.33:8000/",
"role": "standby",
"auto-failover": true
}
]
}
]
}
}
],
"subnet6": [
{
"id": 1,
"subnet": "2001:db8:1::/64",
"pools": [ { "pool": "2001:db8:1::/80" } ],
"interface": "enp0s8",
"user-context": {
"ha-server-name": "server2"
}
},
{
"id": 2,
"subnet": "2001:db8:2::/64",
"pools": [ { "pool": "2001:db8:2::/80" } ],
"interface": "enp0s9",
"user-context": {
"ha-server-name": "server4"
}
}
]
}
}
The peer names in the relationships must be unique. The user context for each subnet contains
the ha-server-name
parameter, associating a subnet with a relationship. The ha-server-name
can be any of the peer names in the relationship. For example, if a relationship contains peer names
server1
and server2
, it does not matter whether the ha-server-name
is server1
or
server2
. In both cases, it associates a subnet with that relationship.
It is not required to specify the ha-server-name
in the branch servers, assuming that the
branch servers only contain the subnets they serve. Consider the following configuration for
branch server3
:
{
"Dhcp6": {
"interfaces-config": {
"interfaces": [ "enp0s8" ]
},
"hooks-libraries": [
{
"library": "/usr/lib/kea/hooks/libdhcp_lease_cmds.so",
"parameters": {}
},
{
"library": "/usr/lib/kea/hooks/libdhcp_ha.so",
"parameters": {
"high-availability": [
{
"this-server-name": "server3",
"mode": "hot-standby",
"multi-threading": {
"enable-multi-threading": true,
"http-dedicated-listener": true,
"http-listener-threads": 4,
"http-client-threads": 4
},
"peers": [
{
"name": "server3",
"url": "http://192.168.57.99:8000/",
"role": "primary",
"auto-failover": true
},
{
"name": "server4",
"url": "http://192.168.57.33:8000/",
"role": "standby",
"auto-failover": true
}
]
}
]
}
}
],
"subnet6": [
{
"id": 2,
"subnet": "2001:db8:2::/64",
"pools": [
{
"pool": "2001:db8:2::/80"
}
],
"interface": "enp0s8",
"user-context": {
"ha-server-name": "server3"
}
}
]
}
}
Note
Even though it is possible to omit the ha-server-name
user context parameters in the
branch servers, we recommend including them. The servers fetch all leases from the
partners during the database synchronization; if the subnets are not explicitly associated with
the relationship, the branch server inserts all fetched leases from the central server (including
those from other relationships) into its database. Specifying the ha-server-name
parameter for
each configured subnet in the branch server guarantees that only the leases belonging to its
relationship are inserted into the branch server's database.
Note
The peer names in the branch servers must match the peer names in the respective central server's relationships, because these names are used for signaling between the HA partners.
Note
The hub-and-spoke configuration is currently incompatible with the reselect-subnet-address
and reselect-subnet-pool
parameters of the libdhcp_radius.so
. The High
Availability hook library uses an originally selected subnet for choosing an HA relationship
to process a packet. The subnet reselection may interfere with this choice. See the
RADIUS Hook Library Configuration for details.
16.13. libdhcp_host_cache.so
: Host Cache Reservations for Improved Performance
Some database backends, such as RADIUS, are slow and may take a long time to respond. Since Kea in general is synchronous, backend performance directly affects DHCP performance. To minimize the impact and improve performance, the Host Cache library provides a way to cache information from the database locally. This includes negative caching, i.e. the ability to remember that there is no client information in the database.
Note
libdhcp_host_cache.so
is available only to ISC customers with
a paid support contract. For more information on subscription options,
please complete the form at https://www.isc.org/contact.
In principle, this hook library can be used with any backend that may introduce performance degradation (MySQL, PostgreSQL or RADIUS). Host Cache must be loaded for the RADIUS accounting mechanism to work.
The Host Cache hook library is very simple. It takes only one
optional parameter (maximum
), which defines the maximum number of hosts
to be cached. If not specified, the default value of 0 is used, which
means there is no limit. This hook library can be loaded the same way as
any other hook library; for example, this configuration could be used:
"Dhcp4": {
# Your regular DHCPv4 configuration parameters here.
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_host_cache.so",
"parameters": {
# Tells Kea to never cache more than 1000 hosts.
"maximum": 1000
}
} ],
...
}
Once loaded, the Host Cache hook library provides a number of new commands which can be used either over the control channel (see Using the Control Channel) or the RESTful API (see Overview of the Kea Control Agent). An example RESTful API client is described in Overview of the Kea Shell. The following sections describe the commands available.
16.13.1. The cache-flush
Command
This command allows removal of a specified number of cached host entries. It takes one parameter, which defines the number of hosts to be removed. An example usage looks as follows:
{
"command": "cache-flush",
"arguments": 1000
}
This command removes 1000 hosts; to delete all cached
hosts, use cache-clear
instead. The hosts are stored in FIFO
(first-in, first-out) order, so the oldest entries are always removed.
16.13.2. The cache-clear
Command
This command allows removal of all cached host entries. An example usage looks as follows:
{
"command": "cache-clear"
}
This command removes all hosts. To delete only a certain
number of cached hosts, please use cache-flush
instead.
16.13.3. The cache-size
Command
This command returns the number of host entries. An example usage looks as follows:
{
"command": "cache-size"
}
16.13.4. The cache-write
Command
In general, the cache content is considered a runtime state and the server can be shut down or restarted as usual; the cache is then repopulated after restart. However, there are some cases when it is useful to store the contents of the cache. One such case is RADIUS, where the cached hosts also retain additional cached RADIUS attributes; there is no easy way to obtain this information again, because renewing clients send their packet to the DHCP server directly. Another use case is when an administrator wants to restart the server and, for performance reasons, wants it to start with a hot (populated) cache.
This command allows writing the contents of the in-memory cache to a file on disk. It takes one parameter, which defines the filename. An example usage looks as follows:
{
"command": "cache-write",
"arguments": "/tmp/kea-host-cache.json"
}
This causes the contents to be stored in the /tmp/kea-host-cache.json
file. That file can then be loaded with the cache-load
command or
processed by any other tool that is able to understand JSON format.
16.13.5. The cache-load
Command
See the previous section for a discussion of use cases where it may be useful to write and load contents of the host cache to disk.
This command allows the contents of a file on disk to be loaded into an in-memory cache. It takes one parameter, which defines the filename. An example usage looks as follows:
{
"command": "cache-load",
"arguments": "/tmp/kea-host-cache.json"
}
This command stores the contents to the /tmp/kea-host-cache.json
file. That file can then be loaded with the cache-load
command or
processed by any other tool that is able to understand JSON format.
16.13.6. The cache-get
Command
This command is similar to cache-write
, but instead of writing the cache
contents to disk, it returns the contents to whoever sent the command.
This command allows the contents of a file on disk to be loaded into an in-memory cache. It takes one parameter, which defines the filename. An example usage looks as follows:
{
"command": "cache-get"
}
This command returns all the cached hosts; the response may be large.
16.13.7. The cache-get-by-id
Command
This command is similar to cache-get
, but instead of returning the whole
content it returns only the entries matching the given identifier.
It takes one parameter, which defines the identifier of wanted cached host reservations. An example usage looks as follows:
{
"command": "cache-get-by-id",
"arguments": {
"hw-address": "01:02:03:04:05:06"
}
}
This command returns all the cached hosts with the given hardware address.
16.13.8. The cache-insert
Command
This command may be used to manually insert a host into the cache; there
are very few use cases when this command might be useful. This command
expects its arguments to follow the usual syntax for specifying host
reservations (see Host Reservations in DHCPv4 or
Host Reservations in DHCPv6), with one difference: the subnet-id
value must be explicitly specified.
An example command to insert an IPv4 host into the host cache looks as follows:
{
"command": "cache-insert",
"arguments": {
"hw-address": "01:02:03:04:05:06",
"subnet-id4": 4,
"subnet-id6": 0,
"ip-address": "192.0.2.100",
"hostname": "somehost.example.org",
"client-classes4": [ ],
"client-classes6": [ ],
"option-data4": [ ],
"option-data6": [ ],
"next-server": "192.0.0.2",
"server-hostname": "server-hostname.example.org",
"boot-file-name": "bootfile.efi",
"host-id": 0
}
}
An example command to insert an IPv6 host into the host cache looks as follows:
{
"command": "cache-insert",
"arguments": {
"hw-address": "01:02:03:04:05:06",
"subnet-id4": 0,
"subnet-id6": 6,
"ip-addresses": [ "2001:db8::cafe:babe" ],
"prefixes": [ "2001:db8:dead:beef::/64" ],
"hostname": "",
"client-classes4": [ ],
"client-classes6": [ ],
"option-data4": [ ],
"option-data6": [ ],
"next-server": "0.0.0.0",
"server-hostname": "",
"boot-file-name": "",
"host-id": 0
}
}
16.13.9. The cache-remove
Command
Sometimes it is useful to remove a single entry from the host cache: for
example, consider a situation where the device is active, Kea has already
provided configuration, and the host entry is in cache. As a result of
administrative action (e.g. the customer hasn't paid their bills or has
been upgraded to better service), the information in the backend database
(e.g. MySQL or RADIUS) is being updated. However, since the cache is in use,
Kea does not notice the change as the cached values are used. The
cache-remove
command can solve this problem by removing a cached entry
after administrative changes.
The cache-remove
command works similarly to the reservation-get
command.
It allows querying by two parameters: either subnet-id4
or subnet-id6
;
or ip-address
(may be an IPv4 or IPv6 address), hw-address
(specifies
a hardware/MAC address), duid
, circuit-id
, client-id
, or flex-id
.
An example command to remove an IPv4 host with reserved address
192.0.2.1 from a subnet with a subnet-id
123 looks as follows:
{
"command": "cache-remove",
"arguments": {
"ip-address": "192.0.2.1",
"subnet-id": 123
}
}
Another example that removes an IPv6 host identifier by DUID and
specific subnet-id
is:
{
"command": "cache-remove",
"arguments": {
"duid": "00:01:ab:cd:f0:a1:c2:d3:e4",
"subnet-id": 123
}
}
16.14. libdhcp_host_cmds.so
: Host Commands
Kea can store host reservations in a database; in many larger deployments, it is useful to be able to manage that information while the server is running. The Host Commands library provides management commands for adding, querying, and deleting host reservations in a safe way without restarting the server. In particular, it validates the parameters, so an attempt to insert incorrect data - such as adding a host with a conflicting identifier in the same subnet - is rejected. Those commands are exposed via the command channel (JSON over UNIX sockets) and the Control Agent (JSON over a RESTful interface).
Note
libdhcp_host_cmds.so
is available as a premium
hook library from ISC. Please visit https://www.isc.org/shop/ to purchase
the premium hook libraries, or contact us at https://www.isc.org/contact for
more information.
Currently, the following commands are supported:
reservation-add
, which adds a new host reservation.reservation-get
, which returns an existing reservation if specified criteria are matched.reservation-get-all
, which returns all reservations in a specified subnet.reservation-get-page
, a variant ofreservation-get-all
that returns reservations by pages, either all or in a specified subnet.reservation-get-by-address
, which returns all reservations with a specified IP address or a delegated prefix (without a prefix length), and optionally a subnet id.reservation-get-by-hostname
, which returns all reservations with a specified hostname and optionally in a subnet.reservation-get-by-id
, which returns all reservations with a specified identifier (since Kea version 1.9.0).reservation-del
, which attempts to delete a reservation matching specified criteria.reservation-update
, which updates (replaces) an existing reservation matching the given identifiers in a subnet.
To use the commands that change reservation information
(i.e. reservation-add
, reservation-del
, and reservation-update
) to
modify data stored in the host database, the hosts database must be specified
and it must not operate in read-only mode (for details, see the
hosts-databases
descriptions in DHCPv4 Hosts Database Configuration and
DHCPv6 Hosts Database Configuration). If the hosts-databases
are not
specified or are running in read-only mode, libdhcp_host_cmds.so
will
load, but any attempts to use reservation-add
, reservation-del
, and
reservation-update
to modify data in that database will fail.
These commands can also modify hosts from the JSON configuration independently
from the hosts database. The changes provided in the JSON configuration are
volatile and can be made permanent by sending the config-write
command.
For a description of proposed future commands, see the Control API Requirements document.
All host commands use JSON syntax. They can be issued either using the control channel (see Management API) or via the Control Agent (see The Kea Control Agent).
The library can be loaded similarly to other hook libraries. It does not take any parameters, and it supports both the DHCPv4 and DHCPv6 servers.
"Dhcp6": {
"hooks-libraries": [
{
"library": "/path/libdhcp_host_cmds.so"
},
...
]
}
16.14.1. The subnet-id
Parameter
Before examining the individual commands, it is worth discussing the
parameter subnet-id
. Currently, this parameter is mandatory for all of the
commands supplied by this library, with the exception of
reservation-get-by-hostname
and reservation-get-by-address
,
where it is optional. subnet-id
is also optional in
reservation-get-page
, and it is forbidden
in reservation-get-by-id
.
Reservations can be specified globally, and are not necessarily specific to any
subnet. When reservations are supplied via the configuration file, the
ID of the containing subnet (or lack thereof) is implicit in the
configuration structure. However, when managing reservations using
host commands, it is necessary to explicitly identify the scope to which
the reservation belongs. This is done via the subnet-id
parameter.
For global reservations, use a value of zero (0). For reservations
scoped to a specific subnet, use that subnet's ID. See also the note
in The reservation-add Command about the reservation-add
command for an empty (i.e. with no reserved address or prefix) reservation.
On the other hand, when the subnet-id
is not specified in the command
parameters, it is added to each host in responses. If the subnet-id
has the unused special value, this means the host entry belongs only
to the other IP version (i.e. IPv6 in the DHCPv4 server or IPv4 in the DHCPv6
server) and this entry is ignored.
16.14.2. The operation-target
Parameter
Most host commands accept the operation-target
parameter, which selects
the host data source. The commands may process data from the server
configuration (i.e., memory operation target), a database (database target),
or both (all sources). The operation-target parameter is optional.
By default, the commands that only read the data use all data sources
(memory and database); the commands that modify the state (i.e. reservation-add
,
reservation-del
, and reservation-update
) only use the
database target.
The operation-target
parameter accepts the following values:
memory
- query or update the runtime server configurationdatabase
- query or update host database(s)all
- query or update both runtime configuration and host database(s)default
- query or update a default host data source - it is command-specific
16.14.3. The reservation-add
Command
reservation-add
allows for the insertion of a new host. It takes a
set of arguments that vary depending on the nature of the host
reservation. Any parameters allowed in the configuration file that
pertain to host reservation are permitted here. For details regarding
IPv4 reservations, see Host Reservations in DHCPv4; for IPv6 reservations, see
Host Reservations in DHCPv6. The subnet-id
is mandatory. Use a
value of zero (0) to add a global reservation, or the ID of the subnet
to which the reservation should be added. The command can be as simple as having
only the two mandatory entries:
{
"command": "reservation-add",
"arguments": {
"reservation": {
"subnet-id": 1,
"hw-address": "1a:1b:1c:1d:1e:1f"
}
}
}
In that case, however, it does not assign any resources to the host. An IPv4 address can be assigned as in this example:
{
"command": "reservation-add",
"arguments": {
"reservation": {
"subnet-id": 1,
"hw-address": "1a:1b:1c:1d:1e:1f",
"ip-address": "192.0.2.202"
}
}
}
It can also take many more parameters, such as:
{
"command": "reservation-add",
"arguments": {
"reservation": {
"subnet-id": 1,
"client-id": "01:0a:0b:0c:0d:0e:0f",
"ip-address": "192.0.2.205",
"next-server": "192.0.2.1",
"server-hostname": "hal9000",
"boot-file-name": "/dev/null",
"option-data": [
{
"name": "domain-name-servers",
"data": "10.1.1.202,10.1.1.203"
}
],
"client-classes": [ "special_snowflake", "office" ]
}
}
}
Here is an example of a complex IPv6 reservation:
{
"command": "reservation-add",
"arguments": {
"reservation": {
"subnet-id": 1,
"duid": "01:02:03:04:05:06:07:08:09:0A",
"ip-addresses": [ "2001:db8:1:cafe::1" ],
"prefixes": [ "2001:db8:2:abcd::/64" ],
"hostname": "foo.example.com",
"option-data": [
{
"name": "vendor-opts",
"data": "4491"
},
{
"name": "tftp-servers",
"space": "vendor-4491",
"data": "3000:1::234"
}
]
}
}
}
The command accepts the operation-target
argument. By default, it adds the
reservation to the hosts database only.
{
"command": "reservation-add",
"arguments": {
"reservation": {},
"operation-target": "all"
}
}
The command returns a status that indicates either success (result 0) or failure (result 1). A failed command always includes a text parameter that explains the cause of the failure. Here's an example of a successful addition:
{
"result": 0,
"text": "Host added."
}
And here's an example of a failure:
{
"result": 1,
"text": "Mandatory 'subnet-id' parameter missing."
}
As reservation-add
is expected to store the host, the hosts-databases
parameter must be specified in the configuration, and databases must not
run in read-only mode.
Note
Since kea version 2.7.0 an empty reservation is implicitly global, i.e.
if no subnet-id
entry is present and for DHCPv4 ip-address
or
for DHCPv6 ip-addresses
and prefixes
do not specify a reserved
address or prefix the command is valid and adds a global (subnet-id 0)
host reservation.
16.14.4. The reservation-get
Command
reservation-get
can be used to query the host database and retrieve
existing reservations. This command supports two types of parameters:
(subnet-id
, address
) or (subnet-id
, identifier-type
,
identifier
). The first type of query is used when the address (either
IPv4 or IPv6) is known, but the details of the reservation are not. One
common use for this type of query is to find out whether a given
address is reserved. The second query uses identifiers. For
maximum flexibility, Kea stores the host identifying information as a
pair of values: the type and the actual identifier. Currently supported
identifiers are "hw-address"
, "duid"
, "circuit-id"
, "client-id"
, and
"flex-id"
. The subnet-id
is mandatory. Use a value
of zero (0) to fetch a global reservation, or the ID of the subnet to
which the reservation belongs.
An example command for getting a host reservation by a (subnet-id
,
address
) pair looks as follows:
{
"command": "reservation-get",
"arguments": {
"subnet-id": 1,
"ip-address": "192.0.2.202"
}
}
An example query by (subnet-id
, identifier-type
, identifier
) looks as
follows:
{
"command": "reservation-get",
"arguments": {
"subnet-id": 4,
"identifier-type": "hw-address",
"identifier": "01:02:03:04:05:06"
}
}
The command accepts the operation-target
argument. By default, it gets the
reservation from both the JSON configuration and the hosts database.
{
"command": "reservation-get",
"arguments": {
"subnet-id": 1,
"ip-address": "192.0.2.202",
"operation-target": "alternate"
}
}
Command reservation-get
typically returns the result 0 when a query was
conducted properly. In particular, 0 is returned when the host was not
found. If the query was successful, the host parameters are
returned. An example of a query that did not find the host looks as
follows:
{ "result": 0, "text": "Host not found." }
Here's an example of a result returned when the host was found successfully:
{
"arguments": {
"boot-file-name": "bootfile.efi",
"client-classes": [
],
"hostname": "somehost.example.org",
"hw-address": "01:02:03:04:05:06",
"ip-address": "192.0.2.100",
"next-server": "192.0.0.2",
"option-data": [
],
"server-hostname": "server-hostname.example.org",
"subnet-id": 4
},
"result": 0,
"text": "Host found."
}
An example result returned when the query was malformed might look like this:
{ "result": 1, "text": "No 'ip-address' provided and 'identifier-type' is either missing or not a string." }
16.14.5. The reservation-get-all
Command
reservation-get-all
can be used to query the host database and
retrieve all reservations in a specified subnet. This command uses
parameters providing the mandatory subnet-id
. Global host reservations
can be retrieved by using a subnet-id
value of zero (0).
For instance, retrieving host reservations for the subnet 1:
{
"command": "reservation-get-all",
"arguments": {
"subnet-id": 1
}
}
returns some IPv4 hosts:
{
"arguments": {
"hosts": [
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "somehost.example.org",
"hw-address": "01:02:03:04:05:06",
"ip-address": "192.0.2.100",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org",
"subnet-id": 1
},
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "otherhost.example.org",
"hw-address": "01:02:03:04:05:ff",
"ip-address": "192.0.2.200",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org",
"subnet-id": 1
},
...
]
},
"result": 0,
"text": "72 IPv4 host(s) found."
}
The response returned by reservation-get-all
can be very long. The
DHCP server does not handle DHCP traffic while preparing a response to
reservation-get-all
, so if there are many reservations in a subnet, this
may be disruptive; use with caution. For larger deployments, please
consider using reservation-get-page
instead.
The command accepts the operation-target
argument. By default, it gets the
reservation from both the JSON configuration and the hosts database.
{
"command": "reservation-get-all",
"arguments": {
"subnet-id": 1,
"operation-target": "alternate"
}
}
For more information, see The reservation-get-all Command.
16.14.6. The reservation-get-page
Command
reservation-get-page
can be used to query the host database and
retrieve all reservations in a specified subnet, by pages. This command
uses parameters providing the mandatory subnet-id
. Use a value of zero
(0) to fetch global reservations. The second mandatory parameter is the
page size limit. The optional source-index
and from-host-id
parameters, both
of which default to 0, are used to chain page queries.
Since Kea version 1.9.0, the subnet-id
parameter is optional.
The usage of the from
and source-index
parameters requires additional
explanation. For the first call, those parameters should not be specified
(or should be specified as zeros). For any follow-up calls, they should be set to
the values returned in previous calls, in a next map holding from
and
source-index
values. Subsequent calls should be issued until all
reservations are returned. The end is reached once the returned list is
empty, the count is 0, no next map is present, and result status 3 (empty) is
returned.
Note
The from
and source-index
parameters reflect the internal state of
the search. There is no need to understand what they represent; it is
simply a value that should be copied from one response to the
next query. However, for those who are curious, the from
field represents a
64-bit representation of the host identifier used by a host backend. The
source-index
is an internal representation of multiple host
backends: 0 is used to represent hosts defined in a configuration
file, and 1 represents the first database backend. In some uncommon cases
there may be more than one database backend configured, so
potentially there may be a 2. In any case, Kea iterates over all
backends configured.
For instance, retrieving host reservations for the subnet 1 and requesting the first page can be done by:
{
"command": "reservation-get-page",
"arguments": {
"subnet-id": 1,
"limit": 10
}
}
Since this is the first call, source-index
and from
should not be
specified. They are set to their zero default values.
Some hosts are returned with information to get the next page:
{
"arguments": {
"count": 72,
"hosts": [
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "somehost.example.org",
"hw-address": "01:02:03:04:05:06",
"ip-address": "192.0.2.100",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org"
},
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "otherhost.example.org",
"hw-address": "01:02:03:04:05:ff",
"ip-address": "192.0.2.200",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org"
},
...
],
"next": {
"from": 1234567,
"source-index": 1
}
},
"result": 0,
"text": "72 IPv4 host(s) found."
}
Note that the from
and source-index
fields were specified in the response in
the next map. Those two must be copied to the next command, so Kea
continues from the place where the last command finished. To get the
next page the following command can be sent:
{
"command": "reservation-get-page",
"arguments": {
"subnet-id": 1,
"source-index": 1,
"from": 1234567,
"limit": 10
}
}
The response will contain a list of hosts with updated source-index
and from
fields. Continue calling the command until the last
page is received. Its response will look like this:
{
"arguments": {
"count": 0,
"hosts": [ ]
},
"result": 3,
"text": "0 IPv4 host(s) found."
}
The command does not accept the operation-target
argument.
This command is more complex than reservation-get-all
, but it lets
users retrieve larger host reservations lists in smaller chunks. For
small deployments with few reservations, it is easier to use
reservation-get-all
.
16.14.7. The reservation-get-by-address
Command
reservation-get-by-address
can be used to query the host database and
retrieve all reservations for a given IP address or a delegated prefix (without
a prefix length), in a specified subnet or in all subnets. This command uses
parameters providing the mandatory ip-address
and the optional subnet-id
and operation-target
.
For instance, retrieving host reservations for the IPv4 address "192.0.200.181" in the subnet 1:
{
"command": "reservation-get-by-address",
"arguments": {
"ip-address": "192.0.200.181",
"subnet-id": 1
},
"service": [
"dhcp4"
]
}
can return two IPv4 hosts:
{
"arguments": {
"hosts": [
{
"boot-file-name": "",
"client-classes": [],
"hostname": "",
"hw-address": "99:99:99:99:99:01",
"ip-address": "192.0.200.181",
"next-server": "0.0.0.0",
"option-data": [],
"server-hostname": "",
"subnet-id": 1
},
{
"boot-file-name": "",
"circuit-id": "1234",
"client-classes": [],
"hostname": "",
"ip-address": "192.0.200.181",
"next-server": "0.0.0.0",
"option-data": [],
"server-hostname": "",
"subnet-id": 1
}
]
},
"result": 0,
"text": "2 IPv4 host(s) found."
}
To search for all reservations in all subnets, simply skip the subnet-id
parameter:
{
"command": "reservation-get-by-address",
"arguments": {
"ip-address": "192.0.200.181"
},
"service": [
"dhcp4"
]
}
An example response could be:
{
"arguments": {
"hosts": [
{
"boot-file-name": "",
"client-classes": [],
"hostname": "",
"hw-address": "99:99:99:99:99:01",
"ip-address": "192.0.200.181",
"next-server": "0.0.0.0",
"option-data": [],
"server-hostname": "",
"subnet-id": 1
},
{
"boot-file-name": "",
"circuit-id": "1234",
"client-classes": [],
"hostname": "",
"ip-address": "192.0.200.181",
"next-server": "0.0.0.0",
"option-data": [],
"server-hostname": "",
"subnet-id": 1
},
{
"boot-file-name": "",
"client-classes": [],
"hostname": "",
"hw-address": "99:99:99:99:99:02",
"ip-address": "192.0.200.181",
"next-server": "0.0.0.0",
"option-data": [],
"server-hostname": "",
"subnet-id": 0
},
{
"boot-file-name": "",
"client-classes": [],
"hostname": "",
"hw-address": "99:99:99:99:99:03",
"ip-address": "192.0.200.181",
"next-server": "0.0.0.0",
"option-data": [],
"server-hostname": "",
"subnet-id": 2
}
]
},
"result": 0,
"text": "4 IPv4 host(s) found."
}
When using the command for retrieving DHCP6 host reservations, one can provide
either an IPv6 address or a delegated prefix as the ip-address
parameter.
Please notice that this command does not take prefix length as a parameter in the
current implementation. Thus, searching by an IP address 2001:db8:2:cafe::
can return host reservations with delegated prefixes of different lengths matching
this search. For example: 2001:db8:2:cafe::/63
, 2001:db8:2:cafe::/64
, etc.
Please consider the example below:
{
"command": "reservation-get-by-address",
"arguments": {
"ip-address": "2001:db8:2:cafa::"
},
"service": [
"dhcp6"
]
}
Response:
{
"arguments": {
"hosts": [
{
"client-classes": [],
"duid": "01:02:03:04:05:06:07:88:98:fa",
"hostname": "foo.example.com",
"ip-addresses": [
"2001:db8:1:cafe::2"
],
"option-data": [],
"prefixes": [
"2001:db8:2:abcd::/64",
"2001:db8:2:cafa::/63"
],
"subnet-id": 8
},
{
"client-classes": [],
"duid": "01:02:03:04:05:06:07:88:98:fb",
"hostname": "foo.example.com",
"ip-addresses": [
"2001:db8:1:cafe::2"
],
"option-data": [],
"prefixes": [
"2001:db8:2:abcd::/64",
"2001:db8:2:cafa::/64"
],
"subnet-id": 8
}
]
},
"result": 0,
"text": "2 IPv6 host(s) found."
}
The command accepts the operation-target
argument. By default, it gets the
reservation from both the JSON configuration and the hosts database.
{
"command": "reservation-get-by-address",
"arguments": {
"ip-address": "192.0.200.181",
"subnet-id": 1,
"operation-target": "alternate"
},
"service": [
"dhcp4"
]
}
Note
This command is useful in specific cases. By default, having more than
one host reservation for the same IP address in a given subnet is not allowed,
as explained in
Multiple Reservations for the Same IPv4
or
Multiple Reservations for the Same IPv6.
That's why this command comes in handy
when the ip-reservations-unique
boolean parameter is set to false
.
Another use case of this command is having overlapping subnets with
the same IP address reservations (but with different identifiers) in different
subnets.
16.14.8. The reservation-get-by-hostname
Command
reservation-get-by-hostname
can be used to query the host database and
retrieve all reservations with a specified hostname or in
a specified subnet. This command uses parameters providing the mandatory
hostname
and the optional subnet-id
. Global host reservations
can be retrieved by using a subnet-id
value of zero (0).
Hostname matching is case-insensitive.
For instance, retrieving host reservations for "foobar" in the subnet 1:
{
"command": "reservation-get-by-hostname",
"arguments": {
"hostname": "foobar.example.org",
"subnet-id": 1
}
}
returns some IPv4 hosts:
{
"arguments": {
"hosts": [
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "foobar.example.org",
"hw-address": "01:02:03:04:05:06",
"ip-address": "192.0.2.100",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org"
},
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "foobar.example.org",
"hw-address": "01:02:03:04:05:ff",
"ip-address": "192.0.2.200",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org"
},
...
]
},
"result": 0,
"text": "5 IPv4 host(s) found."
}
The response returned by reservation-get-by-hostname
can be long,
particularly when responses are not limited to a subnet.
The command accepts the operation-target
argument. By default, it gets the
reservation from both the JSON configuration and the hosts database.
{
"command": "reservation-get-by-hostname",
"arguments": {
"hostname": "foobar.example.org",
"subnet-id": 1,
"operation-target": "alternate"
}
}
For more information, see The reservation-get-by-hostname Command.
Note
When using MySQL as the host backend, this command relies on the fact that the hostname column in the hosts table uses a case-insensitive collation, as explained in the MySQL section of Kea Database Administration.
16.14.9. The reservation-get-by-id
Command
reservation-get-by-id
can be used to query the host database and
retrieve all reservations with a specified identifier (identifier-type
and identifier
parameters), independently of subnets. The syntax for
parameters is the same as for reservation-get
.
The subnet-id
parameter cannot be used, to avoid confusion.
This command is available since Kea version 1.9.0.
For instance, retrieving host reservations for the 01:02:03:04:05:06 MAC address:
{
"command": "reservation-get-by-id",
"arguments": {
"identifier-type": "hw-address",
"identifier": "01:02:03:04:05:06"
}
}
returns some IPv4 hosts:
{
"arguments": {
"hosts": [
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "foo.example.org",
"hw-address": "01:02:03:04:05:06",
"ip-address": "192.0.2.100",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org",
"subnet-id": 123
},
{
"boot-file-name": "bootfile.efi",
"client-classes": [ ],
"hostname": "bar.example.org",
"hw-address": "01:02:03:04:05:06",
"ip-address": "192.0.2.200",
"next-server": "192.0.0.2",
"option-data": [ ],
"server-hostname": "server-hostname.example.org",
"subnet-id": 345
},
...
]
},
"result": 0,
"text": "5 IPv4 host(s) found."
}
The response returned by reservation-get-by-id
can be long,
particularly when responses are not limited to a subnet.
The command accepts the operation-target
argument. By default, it gets the
reservation from both the JSON configuration and the hosts database.
{
"command": "reservation-get-by-id",
"arguments": {
"identifier-type": "hw-address",
"identifier": "01:02:03:04:05:06",
"operation-target": "alternate"
}
}
For more information, see The reservation-get-by-id Command.
16.14.10. The reservation-del
Command
reservation-del
can be used to delete a reservation from the host
database and/or JSON configuration. This command supports two types of parameters:
(subnet-id
, address
) or (subnet-id
, identifier-type
, identifier
). The
first type of query is used when the address (either IPv4 or IPv6) is
known, but the details of the reservation are not. One common use for
this type of query is to remove a reservation (e.g. a specific
address should no longer be reserved). The second query uses identifiers.
For maximum flexibility, Kea stores the host identifying information as
a pair of values: the type and the actual identifier. Currently supported
identifiers are "hw-address"
, "duid"
, "circuit-id"
, "client-id"
, and
"flex-id"
. The subnet-id
is mandatory. Use a value
of zero (0) to delete a global reservation, or the ID of the subnet from
which the reservation should be deleted.
An example command for deleting a host reservation by (subnet-id
,
address
) pair looks as follows:
{
"command": "reservation-del",
"arguments": {
"subnet-id": 1,
"ip-address": "192.0.2.202"
}
}
An example deletion by (subnet-id
, identifier-type
, identifier
) looks as
follows:
{
"command": "reservation-del",
"arguments": {
"subnet-id": 4,
"identifier-type": "hw-address",
"identifier": "01:02:03:04:05:06"
}
}
Command reservation-del
returns a result of 0 when the host deletion was
successful, or 1 if it failed. Descriptive text is provided in the event of
an error. Here are some examples of possible results:
{
"result": 1,
"text": "Host not deleted (not found)."
}
or
{
"result": 0,
"text": "Host deleted."
}
or
{
"result": 1,
"text": "Unable to delete a host because there is no hosts-database configured."
}
The command accepts the operation-target
argument. By default, it removes
the reservation from the hosts database only.
{
"command": "reservation-del",
"arguments": {
"subnet-id": 4,
"identifier-type": "hw-address",
"identifier": "01:02:03:04:05:06",
"operation-target": "primary"
}
}
16.14.11. The reservation-update
Command
reservation-update
allows for the update of an existing host. It takes the
same set of arguments as reservation-add
, and also
requires a host identifier and a subnet ID to identify the host that is being
updated. The command can be as simple as having only the two mandatory entries:
{
"command": "reservation-update",
"arguments": {
"reservation": {
"subnet-id": 1,
"hw-address": "1a:1b:1c:1d:1e:1f"
}
}
}
In that case, however, it does not assign any resources to the host. An IPv4 address can be assigned as in this example:
{
"command": "reservation-update",
"arguments": {
"reservation": {
"subnet-id": 1,
"hw-address": "1a:1b:1c:1d:1e:1f",
"ip-address": "192.0.2.202"
}
}
}
It can also take many more parameters, such as:
{
"command": "reservation-update",
"arguments": {
"reservation": {
"subnet-id": 1,
"client-id": "01:0a:0b:0c:0d:0e:0f",
"ip-address": "192.0.2.205",
"next-server": "192.0.2.1",
"server-hostname": "hal9000",
"boot-file-name": "/dev/null",
"option-data": [
{
"name": "domain-name-servers",
"data": "10.1.1.202,10.1.1.203"
}
],
"client-classes": [
"office",
"special_snowflake"
]
}
}
}
Here is an example of a complex IPv6 reservation update:
{
"command": "reservation-update",
"arguments": {
"reservation": {
"subnet-id": 1,
"duid": "01:02:03:04:05:06:07:08:09:0A",
"ip-addresses": [
"2001:db8:1:cafe::1"
],
"prefixes": [
"2001:db8:2:abcd::/64"
],
"hostname": "foo.example.com",
"option-data": [
{
"name": "vendor-opts",
"data": "4491"
},
{
"name": "tftp-servers",
"space": "vendor-4491",
"data": "3000:1::234"
}
]
}
}
}
The command returns a status that indicates either success (result 0
) or
failure (result 1
), and a text parameter that confirms success or explains
the cause of the failure. Here's an example of a successful update:
{
"result": 0,
"text": "Host updated."
}
And here's an example of a failure:
{
"result": 1,
"text": "Mandatory 'subnet-id' parameter missing."
}
The command accepts the operation-target
argument. By default, it adds the
reservation to the hosts database only. As reservation-update
is expected
to store the host, the hosts-databases
parameter must be specified in the
configuration, and databases must not run in read-only mode if the operation
target is not the JSON configuration.
As with other update and set commands, this command overwrites all the contents
of the entry. If the host previously had a resource assigned to it, and the
reservation-update
command is missing the resource, it is deleted from the
database. If an incremental update of the host is desired, this can be
achieved by issuing a reservation-get-by-id
to get the current state of the
host, selecting the host from the response, modifying it to the required
outcome, and then issuing the reservation-update
command with the resulting
host attached.
16.14.12. General Mentions
Note
The host backends for the host cache and RADIUS hook libraries do not
respond to commands that return a collection of host reservations, such as
reservation-get-all
. Commands returning one host entry or dedicated host
cache commands should be used instead.
16.15. libdhcp_lease_cmds.so
: Lease Commands for Easier Lease Management
Kea allows users to store lease information in several
backends (memfile, MySQL, and PostgreSQL), and the Lease Commands library provides an
interface that can manipulate leases in a unified, safe way.
In particular, it allows things that were previously impossible: lease
manipulation in memfile while Kea is running, sanity check changes,
lease existence checks, and removal of all leases belonging to a
specific subnet. The hook library can also catch more obscure errors, like an attempt
to add a lease with a subnet-id
that does not exist in the
configuration, or configuring a lease to use an address that is outside
of the subnet to which it is supposed to belong. The library also
provides a non-programmatic way to manage user contexts associated with
leases.
Note
libdhcp_lease_cmds.so
is part of the open source code and is
available to every Kea user.
There are many situations where an administrative command may be useful;
for example, during migration between servers or different vendors, when
a certain network is being retired, or when a device has been
disconnected and the system administrator knows that it will not be coming
back. The get
queries may be useful for automating certain management
and monitoring tasks, and they can also act as preparatory steps for lease
updates and removals.
This library provides the following commands:
lease4-add
- adds a new IPv4 lease.lease6-add
- adds a new IPv6 lease.lease6-bulk-apply
- creates, updates, and/or deletes multiple IPv6 leases in a single transaction.lease4-get
- checks whether an IPv4 lease with the specified parameters exists and returns it if it does.lease6-get
- checks whether an IPv6 lease with the specified parameters exists and returns it if it does.lease4-get-all
- returns all IPv4 leases or all IPv4 leases for the specified subnets.lease6-get-all
- returns all IPv6 leases or all IPv6 leases for the specified subnets.lease4-get-page
- returns a set ("page") of leases from the list of all IPv4 leases in the database. By iterating through the pages it is possible to retrieve all the leases.lease6-get-page
- returns a set ("page") of leases from the list of all IPv6 leases in the database. By iterating through the pages it is possible to retrieve all the leases.lease4-get-by-hw-address
- returns all IPv4 leases with the specified hardware address.lease4-get-by-client-id
- returns all IPv4 leases with the specifiedclient-id
.lease6-get-by-duid
- returns all IPv6 leases with the specified DUID.lease4-get-by-hostname
- returns all IPv4 leases with the specified hostname.lease6-get-by-hostname
- returns all IPv6 leases with the specified hostname.lease4-del
- deletes an IPv4 lease with the specified parameters.lease6-del
- deletes an IPv6 lease with the specified parameters.lease4-update
- updates (replaces) an existing IPv4 lease.lease6-update
- updates (replaces) an existing IPv6 lease.lease4-wipe
- removes all leases from a specific IPv4 subnet or from all subnets. This command is deprecated and it will be removed in the future.lease6-wipe
- removes all leases from a specific IPv6 subnet or from all subnets. This command is deprecated and it will be removed in the future.lease4-resend-ddns
- resends a request to update DNS entries for an existing lease.lease6-resend-ddns
- resends a request to update DNS entries for an existing lease.lease4-write
- writes the IPv4 memfile lease database into a file.lease6-write
- writes the IPv6 memfile lease database into a file.
All commands use JSON syntax and can be issued either using the control channel (see Management API) or Control Agent (see The Kea Control Agent).
The library can be loaded in the same way as other hook libraries, and it does not take any parameters. It supports both the DHCPv4 and DHCPv6 servers.
"Dhcp6": {
"hooks-libraries": [
{
"library": "/path/libdhcp_lease_cmds.so"
},
...
]
}
16.15.1. The lease4-add
, lease6-add
Commands
The lease4-add
and
lease6-add
commands allow a new lease
to be created. Typically Kea creates a lease when it first sees a new
device; however, sometimes it may be convenient to create the lease
manually. The lease4-add
command requires at least two parameters:
an IPv4 address and an identifier, i.e. hardware (MAC) address. A third
parameter, subnet-id
, is optional. If the subnet-id
is not specified or
the specified value is 0, Kea tries to determine the value by running
a subnet-selection procedure. If specified, however, its value must
match the existing subnet. The simplest successful call might look as
follows:
{
"command": "lease4-add",
"arguments": {
"ip-address": "192.0.2.202",
"hw-address": "1a:1b:1c:1d:1e:1f"
}
}
The lease6-add
command requires three parameters: an IPv6 address,
an IAID value (identity association identifier, a value sent by
clients), and a DUID. As with lease4-add
, the subnet-id
parameter is
optional. If the subnet-id
is not specified or the provided value is 0,
Kea tries to determine the value by running a subnet-selection
procedure. If specified, however, its value must match the existing
subnet. For example:
{
"command": "lease6-add",
"arguments": {
"subnet-id": 66,
"ip-address": "2001:db8::3",
"duid": "1a:1b:1c:1d:1e:1f:20:21:22:23:24",
"iaid": 1234
}
}
The lease6-add
command can also be used to add leases for IPv6 prefixes.
In this case there are three additional parameters that must be specified:
subnet-id
, type
(set to "IA_PD"), and prefix length. The actual
prefix is set using the ip-address
field. Note that Kea cannot guess
subnet-id
values for prefixes; they must be specified explicitly. For
example, to configure a lease for prefix 2001:db8:abcd::/48, the
following command can be used:
{
"command": "lease6-add",
"arguments": {
"subnet-id": 66,
"type": "IA_PD",
"ip-address": "2001:db8:abcd::",
"prefix-len": 48,
"duid": "1a:1b:1c:1d:1e:1f:20:21:22:23:24",
"iaid": 1234
}
}
The commands can take several additional optional parameters:
valid-lft
- specifies the lifetime of the lease, expressed in seconds. If not specified, the value configured in the subnet related to the specifiedsubnet-id
is used.expire
- creates a timestamp of the lease expiration time, expressed in UNIX format (seconds since 1 Jan 1970). If not specified, the default value is the current time plus the lease lifetime (the value ofvalid-lft
).fqdn-fwd
- specifies whether the lease should be marked as if a forward DNS update were conducted. This only affects the data stored in the lease database, and no DNS update will be performed. If configured, a DNS update to remove the A or AAAA records will be conducted when the lease is removed due to expiration or being released by a client. If not specified, the default value isfalse
. The hostname parameter must be specified iffqdn-fwd
is set totrue
.fqdn-rev
- specifies whether the lease should be marked as if reverse DNS update were conducted. This only affects the data stored in the lease database, and no DNS update will be performed.. If configured, a DNS update to remove the PTR record will be conducted when the lease is removed due to expiration or being released by a client. If not specified, the default value isfalse
. The hostname parameter must be specified iffqdn-fwd
is set totrue
.hostname
- specifies the hostname to be associated with this lease. Its value must be non-empty if eitherfqdn-fwd
orfqdn-rev
are set totrue
. If not specified, the default value is an empty string.hw-address
- optionally specifies a hardware (MAC) address for an IPv6 lease. It is a mandatory parameter for an IPv4 lease.client-id
- optionally specifies a client identifier for an IPv4 lease.preferred-lft
- optionally specifies a preferred lifetime for IPv6 leases. If not specified, the value configured for the subnet corresponding to the specifiedsubnet-id
is used. This parameter is not used when adding an IPv4 lease.state
- specifies the state of an added lease, which can be 0 fordefault
, 1 fordeclined
, 2 forexpired-reclaimed
, and 3 for thereleased
state. Any other value causes an error. Using 1 for a"IA_PD"
lease type is illegal and will be rejected.user-context
- specifies the user context to be associated with this lease. It must be a JSON map.
Here is an example of a fairly complex lease addition:
{
"command": "lease6-add",
"arguments": {
"subnet-id": 66,
"ip-address": "2001:db8::3",
"duid": "01:02:03:04:05:06:07:08",
"iaid": 1234,
"hw-address": "1a:1b:1c:1d:1e:1f",
"preferred-lft": 500,
"valid-lft": 1000,
"expire": 12345678,
"fqdn-fwd": true,
"fqdn-rev": true,
"state": 0,
"hostname": "urania.example.org",
"user-context": { "version": 1 }
}
}
The command returns a status that indicates either success (result 0) or failure (result 1). A failed command always includes a text parameter that explains the cause of failure. For example:
{ "result": 0, "text": "Lease added." }
Example failure:
{ "result": 1, "text": "missing parameter 'ip-address' (<string>:3:19)" }
16.15.2. The lease6-bulk-apply
Command
The lease6-bulk-apply
was implemented to address
the performance penalty in High-Availability mode when a single DHCPv6
transaction resulted in multiple lease updates sent to the partner, if
multiple address and/or prefix leases were allocated. Consider the case
when a DHCPv6 client requests the assignment of two IPv6 addresses and two IPv6
prefixes: it may result in the allocation of four leases. In addition,
DHCPv6 may assign a different address than the one requested by the client during
the renew or rebind stage, and delete the leases previously used by this client.
There are six lease changes sent between the HA partners in this case.
Sending these updates as individual commands, e.g. via lease6-update
,
is highly inefficient and produces unnecessary delays in communication,
both between the HA partners and in sending the response to the DHCPv6 client.
The lease6-bulk-apply
command deals with this
problem by aggregating all lease changes - both deleted leases and
new or updated leases - in a single command.
The receiving server iterates over the deleted leases and deletes them
from its lease database. Next, it iterates over the new/updated leases
and adds them to the database or updates them if they already exist.
Even though High Availability is the major application for this command, it can be freely used in all cases when it is desirable to send multiple lease changes in a single command.
In the following example, we delete two leases and add or update two other leases in the database:
{
"command": "lease6-bulk-apply",
"arguments": {
"deleted-leases": [
{
"ip-address": "2001:db8:abcd::",
"type": "IA_PD",
...
},
{
"ip-address": "2001:db8:abcd::234",
"type": "IA_NA",
...
}
],
"leases": [
{
"subnet-id": 66,
"ip-address": "2001:db8:cafe::",
"type": "IA_PD",
...
},
{
"subnet-id": 66,
"ip-address": "2001:db8:abcd::333",
"type": "IA_NA",
...
}
]
}
}
If any of the leases are malformed, no lease changes are applied to the lease database. If the leases are well-formed but there is a failure to apply any of the lease changes to the database, the command continues to be processed for other leases. All the leases for which the command was unable to apply the changes in the database are listed in the response. For example:
{
"result": 0,
"text": "Bulk apply of 2 IPv6 leases completed",
"arguments": {
"failed-deleted-leases": [
{
"ip-address": "2001:db8:abcd::",
"type": "IA_PD",
"result": 3,
"error-message": "no lease found"
}
],
"failed-leases": [
{
"ip-address": "2001:db8:cafe::",
"type": "IA_PD",
"result": 1,
"error-message": "unable to communicate with the lease database"
}
]
}
}
The response above indicates that the hook library was unable to
delete the lease for prefix "2001:db8:abcd::" and add or update the lease
for prefix "2001:db8:cafe::". However, there are two other lease changes
which have been applied as indicated by the text message. The
result
is the status constant that indicates the type
of the error experienced for the particular lease. The meanings of the
returned codes are the same as the results returned for the commands.
In particular, the result of 1 indicates an error while processing the
lease, e.g. a communication error with the database. The result of 3
indicates that an attempt to delete the lease was unsuccessful because
such a lease doesn't exist (an empty result).
16.15.3. The lease4-get
, lease6-get
Commands
lease4-get
and lease6-get
can be used to query the lease database
and retrieve existing leases. There are two types of parameters the
lease4-get
command supports: (address
) or (subnet-id
,
identifier-type
, identifier
). There are also two types for
lease6-get
: (address
, type
) or (subnet-id
, identifier-type
,
identifier
, IAID
, type
). The first type of query is used when the
address (either IPv4 or IPv6) is known, but the details of the lease are
not; one common use case of this type of query is to find out whether a
given address is being used. The second query uses identifiers;
currently supported identifiers for leases are: "hw-address"
(IPv4
only), "client-id"
(IPv4 only), and "duid"
(IPv6 only).
An example lease4-get
command for getting a lease using an IPv4
address is:
{
"command": "lease4-get",
"arguments": {
"ip-address": "192.0.2.1"
}
}
An example of the lease6-get
query is:
{
"command": "lease6-get",
"arguments": {
"ip-address": "2001:db8:1234:ab::",
"type": "IA_PD"
}
}
An example query by "hw-address"
for an IPv4 lease looks as follows:
{
"command": "lease4-get",
"arguments": {
"identifier-type": "hw-address",
"identifier": "08:08:08:08:08:08",
"subnet-id": 44
}
}
An example query by "client-id"
for an IPv4 lease looks as follows:
{
"command": "lease4-get",
"arguments": {
"identifier-type": "client-id",
"identifier": "01:01:02:03:04:05:06",
"subnet-id": 44
}
}
An example query by (subnet-id
, identifier-type
, identifier
, iaid
, type
)
for an IPv6 lease is:
{
"command": "lease6-get",
"arguments": {
"identifier-type": "duid",
"identifier": "08:08:08:08:08:08",
"iaid": 1234567,
"type": "IA_NA",
"subnet-id": 44
}
}
The type
is an optional parameter. Supported values are: IA_NA
(non-temporary address) and IA_PD
(IPv6 prefix). If not specified, IA_NA
is assumed.
lease4-get
and lease6-get
return an indication of the result of the operation
and lease details, if found. The result has one of the following values: 0
(success), 1 (error), or 3 (empty). An empty result means that a query
has been completed properly, but the object (a lease in this case) has
not been found.
The lease parameters, if found, are returned as arguments.
client-id
is not returned if empty.
An example result returned when the host was found:
{
"arguments": {
"client-id": "42:42:42:42:42:42:42:42",
"cltt": 12345678,
"fqdn-fwd": false,
"fqdn-rev": true,
"hostname": "myhost.example.com.",
"hw-address": "08:08:08:08:08:08",
"ip-address": "192.0.2.1",
"state": 0,
"subnet-id": 44,
"valid-lft": 3600
},
"result": 0,
"text": "IPv4 lease found."
}
Note
The client last transaction time (cltt
field) is bound to the
valid lifetime (valid-lft
) and to the expire date (not reported
here but stored in databases) by the equation
\(cltt + valid\_lft = expire\)
at the exception of the infinite valid lifetime coded by the 0xfffffff (4294967295) special value which makes the expire value to overflow on MySQL and old PostgreSQL backends where timestamps are 32 bit long. So in these lease databases the expire date is the same as the cltt i.e. \(cltt = expire\) when \(valid\_lft = 4294967295\) and the lease backend is MySQL or PostgreSQL.
16.15.4. The lease4-get-all
, lease6-get-all
Commands
lease4-get-all
and lease6-get-all
are used to retrieve all IPv4
or IPv6 leases, or all leases for the specified set of subnets. All
leases are returned when there are no arguments specified with the
command, as in the following example:
{
"command": "lease4-get-all"
}
If arguments are provided, it is expected that they contain the
"subnets"
parameter, which is a list of subnet identifiers for which
leases should be returned. For example, to retrieve all IPv6
leases belonging to the subnets with identifiers 1, 2, 3, and 4:
{
"command": "lease6-get-all",
"arguments": {
"subnets": [ 1, 2, 3, 4 ]
}
}
The returned response contains a detailed list of leases in the following format:
{
"arguments": {
"leases": [
{
"cltt": 12345678,
"duid": "42:42:42:42:42:42:42:42",
"fqdn-fwd": false,
"fqdn-rev": true,
"hostname": "myhost.example.com.",
"hw-address": "08:08:08:08:08:08",
"iaid": 1,
"ip-address": "2001:db8:2::1",
"preferred-lft": 500,
"state": 0,
"subnet-id": 44,
"type": "IA_NA",
"valid-lft": 3600
},
{
"cltt": 12345678,
"duid": "21:21:21:21:21:21:21:21",
"fqdn-fwd": false,
"fqdn-rev": true,
"hostname": "",
"iaid": 1,
"ip-address": "2001:db8:0:0:2::",
"preferred-lft": 500,
"prefix-len": 80,
"state": 0,
"subnet-id": 44,
"type": "IA_PD",
"valid-lft": 3600
}
]
},
"result": 0,
"text": "2 IPv6 lease(s) found."
}
Warning
The lease4-get-all
and
lease6-get-all
commands may result in
very large responses. This may have a negative impact on the DHCP
server's responsiveness while the response is generated and
transmitted over the control channel, as the server imposes no
restriction on the number of leases returned as a result of this
command.
16.15.5. The lease4-get-page
, lease6-get-page
Commands
The lease4-get-all
and
lease6-get-all
commands may result in
very large responses; generating such a response may consume CPU
bandwidth as well as memory. It may even cause the server to become
unresponsive. In the case of large lease databases it is usually better to
retrieve leases in chunks, using the paging mechanism.
lease4-get-page
and lease6-get-page
implement a paging mechanism
for DHCPv4 and DHCPv6 servers, respectively. The following command
retrieves the first 1024 IPv4 leases:
{
"command": "lease4-get-page",
"arguments": {
"from": "start",
"limit": 1024
}
}
The keyword start
denotes that the first page of leases should be
retrieved. Alternatively, an IPv4 zero address can be specified to
retrieve the first page:
{
"command": "lease4-get-page",
"arguments": {
"from": "0.0.0.0",
"limit": 1024
}
}
Similarly, the IPv6 zero address can be specified in the
lease6-get-page
command:
{
"command": "lease6-get-page",
"arguments": {
"from": "::",
"limit": 6
}
}
The response has the following structure:
{
"arguments": {
"leases": [
{
"ip-address": "2001:db8:2::1",
...
},
{
"ip-address": "2001:db8:2::9",
...
},
{
"ip-address": "2001:db8:3::1",
...
},
{
"ip-address": "2001:db8:5::3",
...
},
{
"ip-address": "2001:db8:4::1",
...
},
{
"ip-address": "2001:db8:2::7",
...
},
...
],
"count": 6
},
"result": 0,
"text": "6 IPv6 lease(s) found."
}
Note that the leases' details were excluded from the response above for brevity.
Generally, the returned list is not sorted in any particular order. Some lease database backends may sort leases in ascending order of addresses, but the controlling client must not rely on this behavior.
The count
parameter contains the number of returned leases on the
page.
To fetch the next page, the client must use the last address of the
current page as an input to the next lease4-get-page
or
lease6-get-page
command call. In this example it is:
{
"command": "lease6-get-page",
"arguments": {
"from": "2001:db8:2::7",
"count": 6
}
}
because 2001:db8:2::7 is the last address on the current page.
The client may assume that it has reached the last page when the
count
value is lower than that specified in the command; this
includes the case when the count
is equal to 0, meaning that no
leases were found.
16.15.6. The lease4-get-by-*
, lease6-get-by-*
Commands
lease4-get-by-*
and lease6-get-by-*
can be used to query the lease database and
retrieve all existing leases matching a given feature (denoted by the *
). These
can include a specified hardware address (IPv4
only), client-id
IPv4 only), duid
(IPv6 only) identifiers, or hostname.
An example lease4-get-by-hw-address
command for getting IPv4 leases
with a given hardware address is:
{
"command": "lease4-get-by-hw-address",
"arguments": {
"hw-address": "08:08:08:08:08:08"
}
}
An example of the lease6-get-by-hostname
is:
{
"command": "lease6-get-by-hostname",
"arguments": {
"hostname": "myhost.example.org"
}
}
The by
key is the only parameter. The returned response contains a detailed
list of leases in the same format as lease4-get-all
or lease6-get-all
. This list can be
empty and is usually not large.
16.15.7. The lease4-del
, lease6-del
Commands
lease4-del
and lease6-del
can be used to delete a lease from the lease database.
There are two types of parameters these commands support, similar to the
lease4-get
and lease6-get
commands: (address
) for both v4 and v6, (subnet-id
,
identifier-type
, identifier
) for v4, and (subnet-id
, identifier-type
,
identifier
, type
, IAID
) for v6. The first type of query is used when the
address (either IPv4 or IPv6) is known, but the details of the lease are
not. One common use case is where an administrator wants a specified
address to no longer be used. The second form of the command uses
identifiers. For maximum flexibility, this interface uses identifiers as
a pair of values: the type and the actual identifier. The currently
supported identifiers are "hw-address"
(IPv4 only), "client-id"
(IPv4
only), and "duid"
(IPv6 only).
An example command for deleting an IPv4 lease by address is:
{
"command": "lease4-del",
"arguments": {
"ip-address": "192.0.2.202"
}
}
An example IPv4 lease deletion by "hw-address"
is:
{
"command": "lease4-del",
"arguments": {
"identifier": "08:08:08:08:08:08",
"identifier-type": "hw-address",
"subnet-id": 44
}
}
The IPv6 address leases are deleted the same way, but using lease6-del
. The
IPv6 prefix leases are also deleted using lease6-del
, but with some extra
steps. The prefix should be referenced by its address and prefix length should be ignored.
For example, to delete 2001:db8:1::/48, the following command can be used. The
subnet-id
parameter is optional.
{
"command": "lease6-del",
"arguments": {
"ip-address": "2001:db8:1::",
"type": "IA_PD",
"subnet-id": 1
}
}
Another parameter called update-ddns
, when true
, instructs the server to
queue a request to kea-dhcp-ddns
to remove DNS entries after the lease is
successfully deleted if:
DDNS updating is enabled (i.e.
"dhcp-ddns":{ "enable-updates": true }
).The lease's hostname is not empty.
At least one of the lease's DNS direction flags (
fqdn_fwd
orfqdn_rev
) is true.
This parameter defaults to false
. An example of its use is shown below:
{
"command": "lease4-del",
"arguments": {
"ip-address": "192.0.2.202",
"update-ddns": true
}
}
Commands lease4-del
and lease6-del
return a result that indicates the outcome
of the operation. It has one of the following values: 0 (success), 1 (error),
or 3 (empty). The empty result means that a query has been completed properly,
but the object (a lease, in this case) has not been found.
16.15.8. The lease4-update
, lease6-update
Commands
The lease4-update
and
lease6-update
commands can be used to
update existing leases. Since all lease database backends are indexed by
IP addresses, it is not possible to update an address, but all other
fields may be altered. If an address needs to be changed, please use
lease4-del
/ lease6-del
followed by lease4-add
/ lease6-add
.
The subnet-id
parameter is optional. If not specified, or if the
specified value is 0, Kea tries to determine its value by running a
subnet-selection procedure. If specified, however, its value must match
the existing subnet.
The optional boolean parameter "force-create"
specifies whether the
lease should be created if it does not exist in the database. It defaults
to false
, which indicates that the lease is not created if it does not
exist. In such a case, an error is returned when trying to
update a non-existing lease. If the "force-create"
parameter is set to
true
and the updated lease does not exist, the new lease is created as a
result of receiving the lease4-update
/ lease6-update
command.
An example of a command to update an IPv4 lease is:
{
"command": "lease4-update",
"arguments": {
"ip-address": "192.0.2.1",
"hostname": "newhostname.example.org",
"hw-address": "1a:1b:1c:1d:1e:1f",
"subnet-id": 44,
"force-create": true
}
}
An example of a command to update an IPv6 lease is:
{
"command": "lease6-update",
"arguments": {
"ip-address": "2001:db8::1",
"duid": "88:88:88:88:88:88:88:88",
"iaid": 7654321,
"hostname": "newhostname.example.org",
"subnet-id": 66,
"force-create": false
}
}
As with other update commands, this command overwrites all the contents of the
entry. If the lease previously had a resource assigned to it, and the
lease4-update
/ lease6-update
command is missing the resource, it is
deleted from the lease database. If an incremental update of the lease is
desired, then this can be achieved by issuing a lease4-get
/ lease6-get
command to get the current state of the lease, selecting the lease from the
response, modifying it to the required outcome, and then issuing the
lease4-update
/ lease6-update
command with the resulting lease attached.
16.15.9. The lease4-wipe
, lease6-wipe
Commands
Warning
The lease4-wipe
and lease6-wipe
commands are deprecated
and they will be removed in the future.
lease4-wipe
and lease6-wipe
are designed to remove all leases
associated with a given subnet. This administrative task is expected to
be used when an existing subnet is being retired. The leases
are not properly expired; no DNS updates are carried out, no log
messages are created, and hooks are not called for the leases being
removed.
An example of lease4-wipe
is:
{
"command": "lease4-wipe",
"arguments": {
"subnet-id": 44
}
}
An example of lease6-wipe
is:
{
"command": "lease6-wipe",
"arguments": {
"subnet-id": 66
}
}
The commands return a text description of the number of leases removed, plus the status code 0 (success) if any leases were removed or 3 (empty) if there were no leases. Status code 1 (error) may be returned if the parameters are incorrect or some other exception is encountered.
subnet-id
0 has a special meaning; it tells Kea to delete leases from
all configured subnets. Also, the subnet-id
parameter may be omitted. If
not specified, leases from all subnets are wiped.
Note: currently only memfile lease storage supports this command.
16.15.10. The lease4-resend-ddns
, lease6-resend-ddns
Commands
lease4-resend-ddns
and lease6-resend-ddns
can be used to generate
a request to kea-dhcp-ddns
to update the DNS entries for an existing
lease. The desired lease is selected by a single parameter, "ip-address"
.
For an update request to be generated, DDNS updating must be enabled
and DNS entries must have already been made (or attempted) for the lease.
In other words, all of the following must be true:
DDNS updating must be enabled (i.e.
"dhcp-ddns":{ "enable-updates": true"}
).The lease's hostname must not be empty.
At least one of the lease's DNS direction flags (
fqdn_fwd
orfqdn_rev
) must be true.
An example lease4-resend-ddns
command for getting a lease using an IPv4
address is:
{
"command": "lease4-resend-ddns",
"arguments": {
"ip-address": "192.0.2.1"
}
}
An example of the lease6-resend-ddns
query is:
{
"command": "lease6-resend-ddns",
"arguments": {
"ip-address": "2001:db8:1::1"
}
}
Commands lease4-resend-ddns
and lease6-resend-ddns
return an indication of the
result of the operation. It has one of the following values: 0 (success), 1 (error),
or 3 (empty). An empty result means that a query has been completed properly, but the
object (a lease in this case) has not been found.
A successful result does not mean that DNS has been successfully updated; it
indicates that a request to update DNS has been successfully created and
queued for transmission to kea-dhcp-ddns
.
Here's an example of a result returned when the lease was found:
{
"result": 0,
"text": "NCR generated for: 2001:db8:1::1, hostname: example.com."
}
16.15.11. The lease4-write
, lease6-write
Commands
lease4-write
and lease6-write
can be used for recovery in emergency
situations where the memfile lease file is damaged, e.g. removed by
accident or truncated by a full file system, but the in-memory database
is still valid. These commands are supported only by the memfile database
backend and write the lease database into a CSV file. They take the path
of the file as the filename
argument. If the specified output file
is the same as the configured memfile one, the backend closes and reopens
the file in an attempt to synchronize both the files and the in-memory images
of the lease database. The extension .bak
and the server PID number are added
to the previous filename: for example, .bak14326
.
Note
These commands do not replace the LFC mechanism; they should be used only in exceptional circumstances, such as when recovering after running out of disk space.
16.16. libdhcp_lease_query.so
: Leasequery Support
This library provides support for DHCPv4 Leasequery as described in RFC 4388; and for DHCPv6 Leasequery as described in (RFC 5007).
Note
libdhcp_lease_query.so
is available only to ISC customers with
a paid support contract. For more information on subscription options,
please complete the form at https://www.isc.org/contact.
Kea version 2.3.4 added support for DHCPv6 Bulk Leasequery (RFC 5460); Kea version 2.3.5 added support for DHCPv4 Bulk Leasequery (RFC 6926) using the memfile lease backend.
16.16.1. DHCPv4 Leasequery
DHCPv4 simple Leasequery provides a requester the ability to query for active lease information for either a single IP address or a single client. RFC 4388 calls for three such queries:
Query by IP address
The IP address of interest is contained within the
ciaddr
field of the query.Query by hardware address
The hardware address of interest is contained with the
chaddr
field of the query.Query by client identifier
The client identifier of interest is sent in the
dhcp-client-identifier
option (61) of the query.
The inbound DHCPLEASEQUERY packet must supply only one of the three values above. Queries which supply more than one of these values are dropped.
In addition, the query must contain the IP address of the requester in
giaddr
. This value is used not only as the destination for the
query response but also to validate the requester against a known
list of IP addresses which are permitted to query. This list of valid
requester addresses is specified as part of the Leasequery hook library's
configuration (see the section on configuration below).
In response to a valid query, the server returns one of three message types:
DHCPLEASEUNKNOWN
Returned when the IP address of interest is not one the server knows about (query by IP address); or there are no active leases for the client of interest (query by hardware address or client ID).
DHCPLEASEUNASSIGNED
Returned when the IP address is one the server knows of but for which there are no active leases (applies only to query by IP address).
DHCPLEASEACTIVE
Returned when there is at least one active lease found matching the criteria.
For both DHCPLEASEUNKNOWN and DHCPLEASEUNASSIGNED responses, the only information sent back to the requester in response is the query parameter itself (i.e. one of: IP address, hardware address, or client identifier).
For DHCPLEASEACTIVE the server provides the following information for the newest active lease that matches the criteria, in the response:
ciaddr
- set to the lease's IP addresschaddr
- set to the lease's hardware address
In addition, one or more of the following options are included:
Option |
Code |
Content |
---|---|---|
dhcp-client-identifier |
61 |
copied from the lease (if appropriate) |
client-last-transaction-time |
91 |
the amount of time that has elapsed since the lease's client-last-transaction-time (CLTT). This value is also used by the server to adjust lifetime and timer values. |
dhcp-lease-time |
51 |
lease's lifetime reduced by CLTT |
dhcp-renewal-time |
58 |
as controlled by kea-dhcp4 configuration and then reduced by CLTT |
dhcp-rebind-time |
59 |
as dictated by kea-dhcp4 configuration and then reduced by CLTT |
dhcp-agent-options |
82 |
if stored on the lease. (See Storing Extended Lease Information) |
associated-ip |
92 |
a list of all other IP addresses for which the client has active leases. (Does not apply to query by IP address) |
The dhcp-server-identifier
option (54) is returned in all responses in keeping with
RFC 2131, section 4.3.1.
RFC 4388 allows requesters to ask for specific options via the
dhcp-parameter-request-list
(PRL, option 55). This is not currently supported in Kea.
16.16.2. DHCPv4 Leasequery Configuration
Configuring the Leasequery hook library for use is straightforward. It
supports a single parameter, requesters
, which is a list of IP addresses from
which DHCPLEASEQUERY packets are accepted. In other words, it is a list of
known requesters. The following code shows an example configuration with two requester
addresses:
{
"hooks-libraries": [
{
"library": "lib/kea/hooks/libdhcp_lease_query.so",
"parameters": {
"requesters": [ "192.0.1.1", "10.0.0.2" ]
}
}
],
...
}
Note
For security purposes, there is no way to specify wildcards. Each requester address must be explicitly listed.
16.16.3. DHCPv6 Leasequery
DHCPv6 simple Leasequery gives a requester the ability to query for
active lease information for either a single IP address or a single client
DUID. The query type and parameters are conveyed in an lq-query
option (44)
attached to a DHCPV6_LEASEQUERY
message:
query-type
This is either
query-by-address
(1) orquery-by-clientid
(2)link-address
The global link address, when not empty, instructs the query to be limited to leases within that "link." Kea uses this value to select only leases that belong to subnets whose prefix matches this value. Active leases for prefix delegations for a matched subnet are included in the query reply, even if the delegated prefix itself falls outside the subnet prefix.
query-options
A single
iaaddr
option (12) must be supplied when querying by address. When querying by client ID, a singleclientid
option (1) must be supplied. RFC 5007 also calls for an optional,oro
option (6), to request specific options be returned for matched leases. This is not currently implemented.
Note
RFC 5007, Section 3.3 states that querying by IP address should return either a lease (e.g. binding) for the address itself or a lease for a delegated prefix that contains the address.
DHCPV6_LEASEQUERY
queries are only honored if the source address of
the query matches an entry in a list of known IP addresses which are
permitted to query. This list of valid requester addresses is specified
as part of the Leasequery hook library’s configuration (see the section
on configuration below). Queries received from unknown requesters are
logged and dropped.
In response to a valid query, the server carries out the requisite
activities and returns a DHCPV6_LEASEQUERY_REPLY
. All replies contain
at least a status-code
option (13) that indicates the outcome of the query
as detailed in the following table:
Query Outcome |
Status Label |
Status Code |
Status Text |
---|---|---|---|
Invalid query type field |
STATUS_UnknownQueryType |
7 |
"unknown query-type" |
Query by IP address that does not contain an address option |
STATUS_Malformed |
10 |
"missing D6O_IAADDR" |
Query by IP address for an address that does fall within any configured pools |
STATUS_NotConfigured |
9 |
"address not in a configured pool" |
Query by IP address which found only an inactive lease (e.g. expired, declined, reclaimed-expired) |
STATUS_Success |
0 |
"inactive lease exists" |
Query by IP address that found no leases (active or otherwise) |
STATUS_Success |
0 |
"no active lease" |
Query by IP address that found an active lease for the address |
STATUS_Success |
0 |
"active lease found" |
Query by Client ID that does not contain a client ID option |
STATUS_Malformed |
10 |
"missing D6O_CLIENTID" |
Query by Client ID with a link address that does not match any configured subnets |
STATUS_NotConfigured |
9 |
"not a configured link" |
Query by client ID which found no matching leases |
STATUS_Success |
0 |
"no active leases" |
Query by client ID which found one or more active leases |
STATUS_Success |
0 |
"active lease(s) found" |
For those scenarios where the query was either invalid or for which no matching active
leases were found, the DHCPV6_LEASEQUERY_REPLY
only contains the status-code
option (12) per the above table.
When a query finds active leases in more than one subnet and the query's link-address
is empty, then, in addition to the status-code, the DHCPV6_LEASEQUERY_REPLY
contains an lq-client-link
option (48). The lq-client-link
contains a list of
IPv6 addresses, one for each subnet in which a lease was found (see
RFC 5007, Section 4.1.2.5)
If, however, the query's link-address
is not empty, the list of queries is
pruned to contain only leases that belong to that subnet.
When the query results in one or more active leases which all belong to a single
subnet, in addition to the status-code
, the DHCPV6_LEASEQUERY_REPLY
contains a
client-data
option (45) (see
RFC 5007, Section 4.1.2.2).
The client-data option encapsulates the following options:
Option |
Code |
Content |
---|---|---|
clientid |
1 |
copied from the lease (if one exists) |
clt-time |
46 |
amount of time that has elapsed since the lease's client-last-transaction-time (CLTT). This value will also be used by the server to adjust lifetime and timer values. |
iaaddr |
5 |
One option per matched address. Fields in each option: - lease address - valid lifetime reduced by CLTT - preferred lifetime reduced by CLTT |
iaprefix |
26 |
One option per matched prefix. Fields in each option: - prefix - prefix length - valid lifetime reduced by CLTT - preferred lifetime reduced by CLTT |
If the lease with the most recent client-last-transaction-time (CLTT)
value has relay information in its user context (see
Storing Extended Lease Information), then an OPTION_LQ_RELAY_DATA
option is
added to the reply (see
RFC 5007, Section 4.1.2.4).
The relay information on the lease is a list with an entry for each
relay layer the client packet (e.g. DHCPV6_REQUEST
) traversed, with the
first entry in the list being the outermost layer (closest to the server). The
peer-address
field of the lq-rely-option
is set to the peer address of this
relay. The list of relays is then used to construct a DHCPV6_RELAY_FORW
message
equivalent to that which contained the client packet, minus the client packet.
This message is stored in the DHCP-relay-message
field of the lq-relay-data
option.
16.16.4. DHCPv6 Leasequery Configuration
Configuring the Leasequery hook library for use is straightforward. It
supports a single parameter, requesters
, which is a list of IP addresses from
which DHCPV6_LEASEQUERY packets are accepted. In other words, it is a list of
known requesters. The following code shows an example configuration with two requester
addresses:
{
"hooks-libraries": [
{
"library": "lib/kea/hooks/libdhcp_lease_query.so",
"parameters": {
"requesters": [ "2001:db8:1::1", "2001:db8:2::1" ],
"prefix-lengths": [ 72 ]
}
}
],
...
}
Note
For security purposes, there is no way to specify wildcards. Each requester address must be explicitly listed.
When a query by IP address does not match an existing address lease, a search for a matching delegated prefix is conducted. This is carried out by iterating over a list of prefix lengths in descending order, extracting a prefix of that length from the query address, and searching for a delegation matching the resulting prefix. This continues for each length in the list until a match is found or the list is exhausted.
By default, the list of prefix lengths to use in the search is determined
dynamically after (re)configuration events. The resulting list
contains unique values of delegated-len
, gleaned from the currently
configured set of PD pools.
There is an optional parameter, prefix-lengths
, which
provides the ability to explicitly configure the list rather than having
it be determined dynamically. This provides tighter control over which
prefix lengths are searched. In the above example, the prefix-length
search is restricted to a single pass, using a length of 72, regardless
of whether there are pools using other values for delegated-len
.
Specifying an empty list, as shown below:
:
"prefix-lengths": [ ]
:
disables the search for delegated prefixes for query by IP address.
16.16.5. DHCPv4 Bulk Leasequery
DHCPv4 Bulk Leasequery gives a requester the ability to query for active lease information over a TCP connection. This allows the server to return all leases matching a given query.
Two of the query types identified by RFC 4388 - Query by MAC address and Query by Client-identifier - are Bulk Leasequery types specified by RFC 6926. That RFC also defines these new Bulk Leasequery types:
Query by Relay Identifier
The query carries an RAI (dhcp-agent-options (82)) option with a relay-id (12) sub-option.
Query by Remote ID
The query carries an RAI (dhcp-agent-options (82) option) with a remote-id (2) sub-option.
Query for All Configured IP Addresses
This query type is selected when no other query type is specified.
RFC 6926 also defines new options for Bulk Leasequery:
status-code (151)
This reply option carries a status code such as MalformedQuery or NotAllowed, with an optional text message.
base-time (152)
This reply option carries the absolute current time that the response was created. All other time-based reply options are related to this value.
start-time-of-state (153)
This reply option carries the time of the lease's transition into its current state.
query-start-time (154)
This query option specifies a start-query time; replies will only contain leases that are older than this value.
query-end-time (155)
This query option specifies an end-query time; replies will only contain leases that are newer than this value.
dhcp-state (156)
This reply option carries the lease state.
data-source (157)
This reply option carries the source of the data as a remote flag.
RFC 6926 reuses and extends the Virtual Subnet Selection option (221) defined in RFC 6607.
Note
Kea does not yet support querying for all configured IP addresses, so the dhcp-state option cannot be used, as only active leases can be returned in replies. Kea does not keep the start time of the lease's state, nor the local/remote information, so it cannot emit the corresponding start-time-of-state and data-source options. Kea does not support VPNs so the presence of option 221 in the query is considered a (NotAllowed) error.
16.16.6. DHCPv6 Bulk Leasequery
DHCPv6 Bulk Leasequery gives a requester the ability to query for active lease information over a TCP connection. This allows the server to return all active leases matching a query.
New query types are available: query-by-relay-id
(3),
query-by-link-address
(4), and query-by-remote-id
(5).
A new status code, STATUS_QueryTerminated
(11), has been defined but it is
not yet used by the hook library.
Note
Kea attempts to map link address parameters to the prefixes of configured
subnets. If a given address falls outside all configured subnet prefixes,
the query fails with a status code of STATUS_NotConfigured
. If
the link address parameter for query-by-relay-id
or query-by-remote-id
is not ::
(i.e. not empty), only delegated prefixes that lie within matching
subnet prefixes are returned. Currently, query-by-address
does not
support finding delegated prefixes by specifying an address that lies within
the prefix.
16.16.7. Bulk Leasequery Configuration
Bulk Leasequery configuration is specified via a new map parameter, advanced
,
with these possible entries:
bulk-query-enabled
When
true
, Kea accepts connections from IP addresses in the requesters list and processes received bulk leasequeries. The default isfalse
.active-query-enabled
This is an anticipated parameter: if set, it must be
false
.extended-info-tables-enabled
When
true
, the lease backend manages DHCPv6 lease extended info (relay info) in tables to support the new DHCPv6 Bulk Leasequery by-relay-id and by-remote-id types. The default is to use the same value asbulk-query-enabled
.lease-query-ip
This is the IP address upon which to listen for connections. The address must be of the same family as the server, e.g. IPv6 for the DHCPv6 server.
lease-query-port
This is the port upon which to listen. The default is 67 for IPv4 and 547 for IPv6, i.e. the same value as for the UDP DHCP service, but for TCP.
max-bulk-query-threads
This indicates the maximum number of threads that bulk leasequery processing should use. A value of 0 instructs the server to use the same number of threads that the Kea core is using for DHCP multi-threading. The default is 0.
max-requester-connections
This is the maximum number of concurrent requester connections. The default is 10; the value must be greater than 0.
max-concurrent-queries
This is the maximum number of concurrent queries per connection. The value 0 allows Kea to determine the number, and is the default.
max-requester-idle-time
This is the amount of time that may elapse after receiving data from a requester before its connection is closed as idle, in seconds. The default is 300.
max-leases-per-fetch
This is the maximum number of leases to return in a single fetch. The default is 100.
Once TLS is supported, we expect to implement common TLS parameters.
For instance, for DHCPv4:
{
"hooks-libraries": [
{
"library": "lib/kea/hooks/libdhcp_lease_query.so",
"parameters": {
"requesters": [ "192.0.2.1", "192.0.2.2" ],
"advanced" : {
"bulk-query-enabled": true,
"active-query-enabled": false,
"lease-query-ip": "127.0.0.1",
"lease-query-tcp-port": 67,
"max-bulk-query-threads": 0,
"max-requester-connections": 10,
"max-concurrent-queries": 4,
"max-requester-idle-time": 300,
"max-leases-per-fetch": 100
}
}
}
],
...
}
or for DHCPv6:
{
"hooks-libraries": [
{
"library": "lib/kea/hooks/libdhcp_lease_query.so",
"parameters": {
"requesters": [ "2001:db8:1::1", "2001:db8:2::1" ],
"advanced" : {
"bulk-query-enabled": true,
"active-query-enabled": false,
"extended-info-tables-enabled": true,
"lease-query-ip": "::1",
"lease-query-tcp-port": 547,
"max-bulk-query-threads": 0,
"max-requester-connections": 10,
"max-concurrent-queries": 4,
"max-requester-idle-time": 300,
"max-leases-per-fetch": 100
}
}
}
],
...
}
16.16.8. Updating Existing Leases in SQL Lease Backends
Bulk Leasequery requires additions to the lease data that is stored. With SQL lease backends, leases created prior to the server being configured for bulk lease query do not contain the new data required. In order to populate this data, it is necessary to run these API commands:
Note
Existing leases must have been created by Kea with store-extended-info
enabled, in order for the new data from extended info to be extracted
and stored.
For DHCPv4 lease data, the command is:
{
"command": "extended-info4-upgrade"
}
For DHCPv6 lease data, the command is:
For extended info used by relay ID and by remote ID, the command is:
{
"command": "extended-info6-upgrade"
}
In all cases, the response indicates whether it succeeded or failed and includes either the count of leases updated or the nature of the failure:
{
"result": 0,
"text": "Upgraded 1000 leases"
}
This extended-info6-upgrade
command must be called when:
the database schema was upgraded from 2.4.1 or older version.
extended-info4-upgrade
can be used when upgrading from 2.3.8 or older version.Bulk Leasequery was not enabled; tables are maintained only when v6 BLQ is enabled.
data in tables does not seem to be consistent; tables are not maintained in an atomic way, so consistency is not guaranteed. For instance, when a database is shared between several servers, races can happen between updates.
The operation of the extended info command is governed by the extended-info-checks
parameter, under the sanity-checks
element. Please see Sanity Checks in DHCPv4
or Sanity Checks in DHCPv6.
For large numbers of leases, this command may take some time to complete.
Note
Both the extended-info4-upgrade
and extended-info6-upgrade
commands
are intended for one-time use after upgrading to a version of Kea that fully
supports Bulk Leasequery in database backends. These commands are not meant
for regular use and will be removed in future Kea versions.
16.17. libdhcp_legal_log.so
: Forensic Logging
The Forensic Logging hook library provides hooks that record a detailed log of assignments, renewals, releases, and other lease events into a set of log files.
Note
libdhcp_legal_log.so
is available as a premium
hook library from ISC. Please visit https://www.isc.org/shop/ to purchase
the premium hook libraries, or contact us at https://www.isc.org/contact for
more information.
In many legal jurisdictions, companies - especially ISPs - must record information about the addresses they have leased to DHCP clients. This library is designed to help with that requirement. If the information that it records is sufficient, it may be used directly.
If a jurisdiction requires that different information be saved, users may use the custom formatting capability to extract information from the inbound request packet, or from the outbound response packet. Administrators are advised to use this feature with caution, as it may affect server performance. The custom format cannot be used for control channel commands.
Alternatively, this library may be used as a template or an example for the user's own custom logging hook. The logging is done as a set of hooks to allow it to be customized to any particular need; modifying a hook library is easier and safer than updating the core code. In addition, by using the hooks features, users who do not need to log this information can leave it out and avoid any performance penalties.
16.17.1. Log File Naming
The names of the log files follow a set pattern.
If using day
, month
, or year
as the time unit, the file name follows
the format:
path/base-name.CCYYMMDD.txt
where CC
represents the century, YY
represents the year,
MM
represents the month, and DD
represents the day.
If using second
as the time unit the file name follows the format:
path/base-name.TXXXXXXXXXXXXXXXXXXXX.txt
where XXXXXXXXXXXXXXXXXXXX
represents the time in seconds since the beginning
of the UNIX epoch.
When using second
as the time unit, the file is rotated when
the count
number of seconds pass. In contrast, when using day
, month
,
or year
as the time unit, the file is rotated whenever the count
of day,
month, or year starts, as applicable.
The "path"
and "base-name"
are supplied in the configuration as
described below; see Configuring the Forensic Logging Hooks.
Note
When running Kea servers for both DHCPv4 and DHCPv6, the log names must be distinct. See the examples in Configuring the Forensic Logging Hooks.
16.17.2. Configuring the Forensic Logging Hooks
To use this functionality, the hook library must be included in the
configuration of the desired DHCP server modules. libdhcp_legal_log.so
can save logs to a text file or to a database (created using
kea-admin
; see First-Time Creation of the MySQL Database and First-Time Creation of the PostgreSQL Database).
The library is installed alongside the Kea libraries in
[kea-install-dir]/var/lib/kea
, where kea-install-dir
is determined
by the --prefix
option of the configure script; it defaults to
/usr/local
. Assuming the default value, kea-dhcp4
can be configured to load
libdhcp_legal_log.so
like this:
{
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_legal_log.so",
"parameters": {
"path": "/var/lib/kea/log",
"base-name": "kea-forensic4"
}
}
]
}
}
For kea-dhcp6
, the configuration is:
{
"Dhcp6": {
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_legal_log.so",
"parameters": {
"path": "/var/lib/kea/log",
"base-name": "kea-forensic6"
}
}
]
}
}
The hook library parameters for the text file configuration are:
path
- the directory in which the forensic file(s) will be written. The default value is[prefix]/var/lib/kea
. The directory must exist.base-name
- an arbitrary value which is used in conjunction with the current system date to form the current forensic file name. It defaults tokea-legal
.time-unit
- configures the time unit used to rotate the log file. Valid values aresecond
,day
,month
, oryear
. It defaults today
.count
- configures the number of time units that need to pass until the log file is rotated. It can be any positive number, or 0, which disables log rotation. It defaults to 1.
If log rotation is disabled, a new file is created when the library is loaded; the new file name is different from any previous file name.
Additional actions can be performed just before closing the old file and after opening the new file. These actions must point to an external executable or script and are configured with the following settings:
prerotate
- an external executable or script called with the name of the file that will be closed. Kea does not wait for the process to finish.postrotate
- an external executable or script called with the name of the file that was opened. Kea does not wait for the process to finish.
Custom formatting can be enabled for logging information that can be extracted either from the client's request packet or from the server's response packet. Use with caution as this might affect server performance. The custom format cannot be used for control channel commands. Two parameters can be used towards this goal, either together or separately:
request-parser-format
- an evaluated parsed expression used to extract and log data from the incoming packet.response-parser-format
- an evaluated parsed expression used to extract and log data from the server response packet.
See Using Expressions in Classification for a list of expressions.
If either request-parser-format
or response-parser-format
is
configured, the default logging format is not used. If both of them are
configured, the resulting log message is constructed by concatenating the
data extracted from the request and the data extracted from the response.
The custom formatting permits logging on multiple lines using the hexstring 0x0a (ASCII code for new line). In the log file, each line is prepended with the log timestamp. For the database backend, the data is stored (including the newline character) in the same entry.
Examples:
{
"Dhcp6": {
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_legal_log.so",
"parameters": {
"path": "/var/lib/kea/log",
"base-name": "kea-forensic6",
"request-parser-format": "'first line' + 0x0a + 'second line'",
"response-parser-format": "'also second line' + 0x0a + 'third line'"
}
}
]
}
}
Some data might be available in the request or only in the response; the data in the request packet might differ from that in the response packet.
The lease-client context can only be printed using the default format, as this information is not directly stored in the request packet or in the response packet.
The timestamp-format
parameter can be used to change the timestamp logged
at the beginning of each line. Permissible formatting is the one supported by
strftime plus the '%Q' extra format which adds the microseconds subunits. The
default is: "%Y-%m-%d %H:%M:%S %Z". This parameter has no effect for the
database backends, where the timestamp is defined at the schema level.
Examples:
{
"Dhcp6": {
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_legal_log.so",
"parameters": {
"path": "/var/lib/kea/log",
"base-name": "kea-forensic6",
"timestamp-format": "%H%t%w %F%%"
}
}
]
}
}
Additional parameters for the database connection can be specified, e.g:
{
"Dhcp6": {
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_legal_log.so",
"parameters": {
"name": "database-name",
"password": "passwd",
"type": "mysql",
"user": "user-name"
}
}
]
}
}
For more specific information about database-related parameters, please refer to Lease Database Configuration and Lease Database Configuration.
If it is desired to restrict forensic logging to certain subnets, the
"legal-logging"
boolean parameter can be specified within a user context
of these subnets. For example:
{
"Dhcp4": {
"subnet4": [
{
"id": 1,
"subnet": "192.0.2.0/24",
"pools": [
{
"pool": "192.0.2.1 - 192.0.2.200"
}
],
"user-context": {
"legal-logging": false
}
}
]
}
}
This configuration disables legal logging for the subnet "192.0.2.0/24". If the
"legal-logging"
parameter is not specified, it defaults to true
, which
enables legal logging for the subnet.
The following example demonstrates how to selectively disable legal logging for an IPv6 subnet:
{
"Dhcp6": {
"subnet6": [
{
"id": 1,
"subnet": "2001:db8:1::/64",
"pools": [
{
"pool": "2001:db8:1::1-2001:db8:1::ffff"
}
],
"user-context": {
"legal-logging": false
}
}
]
}
}
See User Contexts in IPv4 and User Contexts in IPv6 to learn more about user contexts in Kea configuration.
16.17.3. DHCPv4 Log Entries
For DHCPv4, the library creates entries based on DHCPREQUEST, DHCPDECLINE, and DHCPRELEASE messages, et al., and their responses. The resulting packets and leases are taken into account, intercepted through the following hook points:
pkt4_receive
leases4_committed
pkt4_send
lease4_release
lease4_decline
An entry is a single string with no embedded end-of-line markers and a prepended timestamp, and has the following sections:
timestamp address duration device-id {client-info} {relay-info} {user-context}
Where:
timestamp
- the date and time the log entry was written, in "%Y-%m-%d %H:%M:%S %Z" strftime format ("%Z" is the time zone name).address
- the leased IPv4 address given out, and whether it was assigned, renewed, or released.duration
- the lease lifetime expressed in days (if present), hours, minutes, and seconds. A lease lifetime of 0xFFFFFFFF will be denoted with the text "infinite duration." This information is not given when the lease is released.device-id
- the client's hardware address shown as a numerical type and hex-digit string.client-info
- the DHCP client id option (61) if present, shown as a hex string. When its content is printable it is displayed.relay-info
- for relayed packets, thegiaddr
and the RAIcircuit-id
,remote-id
, andsubscriber-id
options (option 82 sub options: 1, 2 and 6), if present. Thecircuit-id
andremote-id
are presented as hex strings. When their content is printable it is displayed.user-context
- the optional user context associated with the lease.
For instance (line breaks are added here for readability; they are not present in the log file):
2018-01-06 01:02:03 CET Address: 192.2.1.100 has been renewed for 1 hrs 52 min 15 secs to a device with hardware address:
hwtype=1 08:00:2b:02:3f:4e, client-id: 17:34:e2:ff:09:92:54 connected via relay at address: 192.2.16.33,
identified by circuit-id: 68:6f:77:64:79 (howdy) and remote-id: 87:f6:79:77:ef
or for a release:
2018-01-06 01:02:03 CET Address: 192.2.1.100 has been released from a device with hardware address:
hwtype=1 08:00:2b:02:3f:4e, client-id: 17:34:e2:ff:09:92:54 connected via relay at address: 192.2.16.33,
identified by circuit-id: 68:6f:77:64:79 (howdy) and remote-id: 87:f6:79:77:ef
In addition to logging lease activity driven by DHCPv4 client traffic,
the hook library also logs entries for the following lease management control
channel commands: lease4-add
, lease4-update
, and lease4-del
. These cannot have
custom formatting. Each entry is a single string with no embedded end-of-line
markers, and it will typically have the following form:
lease4-add:
*timestamp* Administrator added a lease of address: *address* to a device with hardware address: *device-id*
Depending on the arguments of the add command, it may also include the client-id and duration.
Example:
2018-01-06 01:02:03 CET Administrator added a lease of address: 192.0.2.202 to a device with hardware address:
1a:1b:1c:1d:1e:1f for 1 days 0 hrs 0 mins 0 secs
lease4-update:
*timestamp* Administrator updated information on the lease of address: *address* to a device with hardware address: *device-id*
Depending on the arguments of the update command, it may also include the client-id and lease duration.
Example:
2018-01-06 01:02:03 CET Administrator updated information on the lease of address: 192.0.2.202 to a device
with hardware address: 1a:1b:1c:1d:1e:1f, client-id: 1234567890
lease4-del:
deletes have two forms, one by address and one by
identifier and identifier type:
*timestamp* Administrator deleted the lease for address: *address*
or
*timestamp* Administrator deleted a lease for a device identified by: *identifier-type* of *identifier*
Currently only a type of @b hw-address
(hardware address) is supported.
Examples:
2018-01-06 01:02:03 CET Administrator deleted the lease for address: 192.0.2.202
2018-01-06 01:02:12 CET Administrator deleted a lease for a device identified by: hw-address of 1a:1b:1c:1d:1e:1f
If the High Availability hook library is enabled, the partner periodically sends lease commands in a similar format; the only difference is that the issuer of the command is "HA partner" instead of "Administrator."
*timestamp* HA partner added ...
or
*timestamp* HA partner updated ...
or
*timestamp* HA partner deleted ...
The request-parser-format
and response-parser-format
options can be used to
extract and log data from the incoming packet and server response packet,
respectively. The configured value is an evaluated parsed expression returning a
string. A list of tokens is described in the server classification process.
Use with caution as this might affect server performance.
If either of them is configured, the default logging format is not used.
If both of them are configured, the resulting log message is constructed by
concatenating the logged data extracted from the request and the logged data
extracted from the response.
The custom formatting permits logging on multiple lines using the hexstring 0x0a (ASCII code for new line). In the case of the log file, each line is prepended with the log timestamp. For the database backend, the data is stored (including the newline character) in the same entry.
Examples:
{
"Dhcp4": {
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_legal_log.so",
"parameters": {
"name": "database-name",
"password": "passwd",
"type": "mysql",
"user": "user-name",
"request-parser-format": "'log entry' + 0x0a + 'same log entry'",
"response-parser-format": "'also same log entry' + 0x0a + 'again same log entry'"
}
}
]
}
}
Some data might be available in the request or in the response only, and some data might differ in the incoming packet from the one in the response packet.
Examples:
{
"request-parser-format": "ifelse(pkt4.msgtype == 4 or pkt4.msgtype == 7, 'Address: ' + ifelse(option[50].exists, addrtotext(option[50].hex), addrtotext(pkt4.ciaddr)) + ' has been released from a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), '')",
"response-parser-format": "ifelse(pkt4.msgtype == 5, 'Address: ' + addrtotext(pkt4.yiaddr) + ' has been assigned for ' + uint32totext(option[51].hex) + ' seconds to a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), '')"
}
Details:
Expand here!
{ "request-parser-format": "ifelse(pkt4.msgtype == 4 or pkt4.msgtype == 7, 'Address: ' + ifelse(option[50].exists, addrtotext(option[50].hex), addrtotext(pkt4.ciaddr)) + ' has been released from a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), '')", "response-parser-format": "ifelse(pkt4.msgtype == 5, 'Address: ' + addrtotext(pkt4.yiaddr) + ' has been assigned for ' + uint32totext(option[51].hex) + ' seconds to a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), '')" }
This will log the following data on request and renew:
Address: 192.2.1.100 has been assigned for 6735 seconds to a device with hardware address: hwtype=1 08:00:2b:02:3f:4e, client-id: 17:34:e2:ff:09:92:54 connected via relay at address: 192.2.16.33, circuit-id: 68:6f:77:64:79, remote-id: 87:f6:79:77:ef, subscriber-id: 1a:2b:3c:4d:5e:6f
This will log the following data on release and decline:
Address: 192.2.1.100 has been released from a device with hardware address: hwtype=1 08:00:2b:02:3f:4e, client-id: 17:34:e2:ff:09:92:54 connected via relay at address: 192.2.16.33, circuit-id: 68:6f:77:64:79, remote-id: 87:f6:79:77:ef, subscriber-id: 1a:2b:3c:4d:5e:6f
A similar result can be obtained by configuring only request-parser-format
.
Examples:
{
"request-parser-format": "ifelse(pkt4.msgtype == 3, 'Address: ' + ifelse(option[50].exists, addrtotext(option[50].hex), addrtotext(pkt4.ciaddr)) + ' has been assigned' + ifelse(option[51].exists, ' for ' + uint32totext(option[51].hex) + ' seconds', '') + ' to a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), ifelse(pkt4.msgtype == 4 or pkt4.msgtype == 7, 'Address: ' + ifelse(option[50].exists, addrtotext(option[50].hex), addrtotext(pkt4.ciaddr)) + ' has been released from a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), ''))"
}
Details:
Expand here!
{ "request-parser-format": "ifelse(pkt4.msgtype == 3, 'Address: ' + ifelse(option[50].exists, addrtotext(option[50].hex), addrtotext(pkt4.ciaddr)) + ' has been assigned' + ifelse(option[51].exists, ' for ' + uint32totext(option[51].hex) + ' seconds', '') + ' to a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), ifelse(pkt4.msgtype == 4 or pkt4.msgtype == 7, 'Address: ' + ifelse(option[50].exists, addrtotext(option[50].hex), addrtotext(pkt4.ciaddr)) + ' has been released from a device with hardware address: hwtype=' + substring(hexstring(pkt4.htype, ''), 7, 1) + ' ' + hexstring(pkt4.mac, ':') + ifelse(option[61].exists, ', client-id: ' + hexstring(option[61].hex, ':'), '') + ifelse(pkt4.giaddr == 0.0.0.0, '', ' connected via relay at address: ' + addrtotext(pkt4.giaddr) + ifelse(option[82].option[1].exists, ', circuit-id: ' + hexstring(option[82].option[1].hex, ':'), '') + ifelse(option[82].option[2].exists, ', remote-id: ' + hexstring(option[82].option[2].hex, ':'), '') + ifelse(option[82].option[6].exists, ', subscriber-id: ' + hexstring(option[82].option[6].hex, ':'), '')), ''))" }
16.17.4. DHCPv6 Log Entries
For DHCPv6, the library creates entries based on REQUEST, RENEW, RELEASE, and DECLINE messages, et al. and their responses. The resulting packets and leases are taken into account, intercepted through the following hook points:
pkt6_receive
leases6_committed
pkt6_send
lease6_release
lease6_decline
An entry is a single string with no embedded end-of-line markers and a prepended timestamp, and has the following sections:
timestamp address duration device-id {relay-info}* {user-context}
Where:
timestamp
- the date and time the log entry was written, in "%Y-%m-%d %H:%M:%S %Z" strftime format ("%Z" is the time zone name).address
- the leased IPv6 address or prefix given out, and whether it was assigned, renewed, or released.duration
- the lease lifetime expressed in days (if present), hours, minutes, and seconds. A lease lifetime of 0xFFFFFFFF will be denoted with the text "infinite duration." This information is not given when the lease is released.device-id
- the client's DUID and hardware address (if present).relay-info
- for relayed packets the content of relay agent messages, and theremote-id
(code 37),subscriber-id
(code 38), andinterface-id
(code 18) options, if present. Note that theinterface-id
option, if present, identifies the whole interface on which the relay agent received the message. This typically translates to a single link in the network, but it depends on the specific network topology. Nevertheless, this is useful information to better pinpoint the location of the device, so it is recorded, if present.user-context
- the optional user context associated with the lease.
For instance (line breaks are added here for readability; they are not present in the log file):
2018-01-06 01:02:03 PST Address:2001:db8:1:: has been assigned for 0 hrs 11 mins 53 secs
to a device with DUID: 17:34:e2:ff:09:92:54 and hardware address: hwtype=1 08:00:2b:02:3f:4e
(from Raw Socket) connected via relay at address: fe80::abcd for client on link address: 3001::1,
hop count: 1, identified by remote-id: 01:02:03:04:0a:0b:0c:0d:0e:0f and subscriber-id: 1a:2b:3c:4d:5e:6f
or for a release:
2018-01-06 01:02:03 PST Address:2001:db8:1:: has been released
from a device with DUID: 17:34:e2:ff:09:92:54 and hardware address: hwtype=1 08:00:2b:02:3f:4e
(from Raw Socket) connected via relay at address: fe80::abcd for client on link address: 3001::1,
hop count: 1, identified by remote-id: 01:02:03:04:0a:0b:0c:0d:0e:0f and subscriber-id: 1a:2b:3c:4d:5e:6f
In addition to logging lease activity driven by DHCPv6 client traffic,
the hook library also logs entries for the following lease management control channel
commands: lease6-add
, lease6-update
, and lease6-del
. Each entry is a
single string with no embedded end-of-line markers, and it will
typically have the following form:
lease6-add:
*timestamp* Administrator added a lease of address: *address* to a device with DUID: *DUID*
Depending on the arguments of the add command, it may also include the hardware address and duration.
Example:
2018-01-06 01:02:03 PST Administrator added a lease of address: 2001:db8::3 to a device with DUID:
1a:1b:1c:1d:1e:1f:20:21:22:23:24 for 1 days 0 hrs 0 mins 0 secs
lease6-update:
*timestamp* Administrator updated information on the lease of address: *address* to a device with DUID: *DUID*
Depending on the arguments of the update command, it may also include the hardware address and lease duration.
Example:
2018-01-06 01:02:03 PST Administrator updated information on the lease of address: 2001:db8::3 to a device with
DUID: 1a:1b:1c:1d:1e:1f:20:21:22:23:24, hardware address: 1a:1b:1c:1d:1e:1f
lease6-del:
deletes have two forms, one by address and one by
identifier and identifier type:
*timestamp* Administrator deleted the lease for address: *address*
or
*timestamp* Administrator deleted a lease for a device identified by: *identifier-type* of *identifier*
Currently only a type of DUID
is supported.
Examples:
2018-01-06 01:02:03 PST Administrator deleted the lease for address: 2001:db8::3
2018-01-06 01:02:11 PST Administrator deleted a lease for a device identified by: duid of 1a:1b:1c:1d:1e:1f:20:21:22:23:24
If the High Availability hook library is enabled, the partner periodically sends lease commands in a similar format; the only difference is that the issuer of the command is "HA partner" instead of "Administrator."
*timestamp* HA partner added ...
or
*timestamp* HA partner updated ...
or
*timestamp* HA partner deleted ...
The request-parser-format
and response-parser-format
options can be used to
extract and log data from the incoming packet and server response packet,
respectively. The configured value is an evaluated parsed expression returning a
string. A list of tokens is described in the server classification process.
Use with caution as this might affect server performance.
If either of them is configured, the default logging format is not used.
If both of them are configured, the resulting log message is constructed by
concatenating the logged data extracted from the request and the logged data
extracted from the response.
The custom formatting permits logging on multiple lines using the hexstring 0x0a (ASCII code for new line). In the case of the log file, each line is prepended with the log timestamp. For the database backend, the data is stored (including the newline character) in the same entry.
Examples:
{
"Dhcp6": {
"hooks-libraries": [
{
"library": "/usr/local/lib/kea/hooks/libdhcp_legal_log.so",
"parameters": {
"name": "database-name",
"password": "passwd",
"type": "mysql",
"user": "user-name",
"request-parser-format": "'log entry' + 0x0a + 'same log entry'",
"response-parser-format": "'also same log entry' + 0x0a + 'again same log entry'"
}
}
]
}
}
Some data might be available in the request or in the response only, and some data might differ in the incoming packet from the one in the response packet.
Notes:
In the case of IPv6, the packets can contain multiple IA_NA (3) or IA_PD (25) options, each containing multiple options, including OPTION_IAADDR (5) or OPTION_IAPREFIX (25) suboptions. To be able to print the current lease associated with the log entry, the forensic log hook library internally isolates the corresponding IA_NA or IA_PD option and respective suboption matching the current lease. The hook library will iterate over all new allocated addresses and all deleted addresses, making each address available for logging as the current lease for the respective logged entry.
They are accessible using the following parser expressions:
Current lease associated with OPTION_IAADDR:
addrtotext(substring(option[3].option[5].hex, 0, 16))
Current lease associated with OPTION_IAPREFIX:
addrtotext(substring(option[25].option[26].hex, 9, 16))
All other parameters of the options are available at their respective offsets in the option. Please read RFC8415 for more details.
Examples:
{
"request-parser-format": "ifelse(pkt6.msgtype == 8 or pkt6.msgtype == 9, ifelse(option[3].option[5].exists, 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been released from a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), '') + ifelse(option[25].option[26].exists, 'Prefix: ' + addrtotext(substring(option[25].option[26].hex, 9, 16)) + '/' + uint8totext(substring(option[25].option[26].hex, 8, 1)) + ' has been released from a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), ''), '')",
"response-parser-format": "ifelse(pkt6.msgtype == 7, ifelse(option[3].option[5].exists and not (substring(option[3].option[5].hex, 20, 4) == 0), 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been assigned for ' + uint32totext(substring(option[3].option[5].hex, 20, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), '') + ifelse(option[25].option[26].exists and not (substring(option[25].option[26].hex, 4, 4) == 0), 'Prefix: ' + addrtotext(substring(option[25].option[26].hex, 9, 16)) + '/' + uint8totext(substring(option[25].option[26].hex, 8, 1)) + ' has been assigned for ' + uint32totext(substring(option[25].option[26].hex, 4, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), ''), '')"
}
Details:
Expand here!
{ "request-parser-format": "ifelse(pkt6.msgtype == 8 or pkt6.msgtype == 9, ifelse(option[3].option[5].exists, 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been released from a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), '') + ifelse(option[25].option[26].exists, 'Prefix: ' + addrtotext(substring(option[25].option[26].hex, 9, 16)) + '/' + uint8totext(substring(option[25].option[26].hex, 8, 1)) + ' has been released from a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), ''), '')", "response-parser-format": "ifelse(pkt6.msgtype == 7, ifelse(option[3].option[5].exists and not (substring(option[3].option[5].hex, 20, 4) == 0), 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been assigned for ' + uint32totext(substring(option[3].option[5].hex, 20, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), '') + ifelse(option[25].option[26].exists and not (substring(option[25].option[26].hex, 4, 4) == 0), 'Prefix: ' + addrtotext(substring(option[25].option[26].hex, 9, 16)) + '/' + uint8totext(substring(option[25].option[26].hex, 8, 1)) + ' has been assigned for ' + uint32totext(substring(option[25].option[26].hex, 4, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), ''), '')" }
This will log the following data on request, renew, and rebind for NA:
Address: 2001:db8:1:: has been assigned for 713 seconds to a device with DUID: 17:34:e2:ff:09:92:54 connected via relay at address: fe80::abcd for client on link address: 3001::1, remote-id: 01:02:03:04:0a:0b:0c:0d:0e:0f, subscriber-id: 1a:2b:3c:4d:5e:6f, connected at location interface-id: 72:65:6c:61:79:31:3a:65:74:68:30
This will log the following data on request, renew and rebind for PD:
Prefix: 2001:db8:1::/64 has been assigned for 713 seconds to a device with DUID: 17:34:e2:ff:09:92:54 connected via relay at address: fe80::abcd for client on link address: 3001::1, remote-id: 01:02:03:04:0a:0b:0c:0d:0e:0f, subscriber-id: 1a:2b:3c:4d:5e:6f, connected at location interface-id: 72:65:6c:61:79:31:3a:65:74:68:30
This will log the following data on release and decline for NA:
Address: 2001:db8:1:: has been released from a device with DUID: 17:34:e2:ff:09:92:54 connected via relay at address: fe80::abcd for client on link address: 3001::1, remote-id: 01:02:03:04:0a:0b:0c:0d:0e:0f, subscriber-id: 1a:2b:3c:4d:5e:6f, connected at location interface-id: 72:65:6c:61:79:31:3a:65:74:68:30
This will log the following data on release and decline for PD:
Prefix: 2001:db8:1::/64 has been released from a device with DUID: 17:34:e2:ff:09:92:54 connected via relay at address: fe80::abcd for client on link address: 3001::1, remote-id: 01:02:03:04:0a:0b:0c:0d:0e:0f, subscriber-id: 1a:2b:3c:4d:5e:6f, connected at location interface-id: 72:65:6c:61:79:31:3a:65:74:68:30
A similar result can be obtained by configuring only request-parser-format
.
Examples:
{
"request-parser-format": "ifelse(pkt6.msgtype == 3 or pkt6.msgtype == 5 or pkt6.msgtype == 6, ifelse(option[3].option[5].exists, 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been assigned for ' + uint32totext(substring(option[3].option[5].hex, 20, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), '') + ifelse(option[25].option[26].exists, 'Prefix: ' + addrtotext(substring(option[25].option[26].hex, 9, 16)) + '/' + uint8totext(substring(option[25].option[26].hex, 8, 1)) + ' has been assigned for ' + uint32totext(substring(option[25].option[26].hex, 4, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), ''), ifelse(pkt6.msgtype == 8 or pkt6.msgtype == 9, ifelse(option[3].option[5].exists, 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been released from a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), '') + ifelse(option[25].option[26].exists, 'Prefix: ' + addrtotext(substring(option[25].option[26].hex, 9, 16)) + '/' + uint8totext(substring(option[25].option[26].hex, 8, 1)) + ' has been released from a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), ''), ''))"
}
Details:
Expand here!
{ "request-parser-format": "ifelse(pkt6.msgtype == 3 or pkt6.msgtype == 5 or pkt6.msgtype == 6, ifelse(option[3].option[5].exists, 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been assigned for ' + uint32totext(substring(option[3].option[5].hex, 20, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), '') + ifelse(option[25].option[26].exists, 'Prefix: ' + addrtotext(substring(option[25].option[26].hex, 9, 16)) + '/' + uint8totext(substring(option[25].option[26].hex, 8, 1)) + ' has been assigned for ' + uint32totext(substring(option[25].option[26].hex, 4, 4)) + ' seconds to a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at address: ' + addrtotext(relay6[0].peeraddr) + ' for client on link address: ' + addrtotext(relay6[0].linkaddr) + ifelse(relay6[0].option[37].exists, ', remote-id: ' + hexstring(relay6[0].option[37].hex, ':'), '') + ifelse(relay6[0].option[38].exists, ', subscriber-id: ' + hexstring(relay6[0].option[38].hex, ':'), '') + ifelse(relay6[0].option[18].exists, ', connected at location interface-id: ' + hexstring(relay6[0].option[18].hex, ':'), '')), ''), ifelse(pkt6.msgtype == 8 or pkt6.msgtype == 9, ifelse(option[3].option[5].exists, 'Address: ' + addrtotext(substring(option[3].option[5].hex, 0, 16)) + ' has been released from a device with DUID: ' + hexstring(option[1].hex, ':') + ifelse(relay6[0].peeraddr == '', '', ' connected via relay at